Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on Oct 26, 2009
Proper incorporation and thorough mixing of the catalyst is critical to achieving desired cured film properties and should, therefore, be done with great care. Container is filled low to allow room for mixing as well as the addition of the catalyst. Insert mixing paddle in Liquid Rubber and mix for approximately one minute so that material is moving uniformly and has formed a vortex. Slowly add catalyst into this vortex at a rate which allows it to be incorporated without puddling.
DO NOT pour catalyst on top of Liquid Rubber/Liquid Roof prior to starting mixer. After all the catalyst has been added, the mixer (if hand held) should be moved in a circular fashion around the periphery of the pail as well as up and down to insure that the catalyst is completely and uniformly mixed. Periodically scrape the sides with a rubber or metal spatula to incorporate the stagnant layer of material adhering to walls of pail.