 What's happening guys? Thanks for stopping back by the channel We've got another really cool episode of some really awesome snap-on stuff I know you guys checked out my last few videos with the new toolbox that came in and This time I'm gonna get going into work early and we're gonna put this thing together I'm gonna show you how the epic toolbox came how it all goes together piece by piece bit by bit and we're gonna get this thing put together right and Hopefully you guys enjoy the brand-new toolbox with the newest color that snap-on has to come out with for its trim option The side does have threaded holes here there and then normally where you would have a handle there's also holes there and there that are threaded as well then Inside of our cabinet there are holes up in here and Back there and then also at the mid-level To where we're gonna be putting the mounting screws through to the box, so we'll get that done And actually the wheels on this right side are a little smaller than the wheels on this side So to bring that up, I've got a couple of washers there on the ground That's gonna roll up to be able to bring it level This kind of goes right here into the holes and then on the back side of the door There are holes for inserting on that one It's gonna be an eight millimeter and there are some nuts that are included in the kit for that So once you get the four bolts in here mounted which are located layer In there back there Back in there Then we're gonna be taking off our casters the epic series They have casters that go all you know They they swivel all the way around and then the casters here on the cabinets. They are Not swivel ones. So those are actually just for shipping only so we're gonna be removing those next is this blue Retainer here that you can use the jack up or you know, whatever you want. It's an extra support for it We don't need that one We're gonna be taking that one off too as soon as we take the other side off are just a few more that we can cinch everything into right here and On the other side as well There's gonna be some bolts with some nuts to go across to cinch the bottom part together because as you can See up top we're good and then the bottom we still get a little bit of a gap So we'll be getting away with that just like that and then we'll repeat for the other side But you can see hold the gap right back together So now we got even gap and this thing is secured all the way up and down That's how we do it guys And Funny enough, each one of them came with two remotes, so I've got two So this one is for the main box, I want to use this one for all of them So I think we got it right. We have to put these in program about each one of you So each of them Starts to beat you let go of it then hit a button To one single remote and now I have two or six extra remotes Paperweights, I guess And then see that I started to amounted my little TV back here in the back All right, so we've got everything hooked up to the way it really needs to be everything is cinched all together Now we're gonna be talking lights Ended up going with the snap-on kit They threw it in free This one is a remote control set, but we got another set of lights that's got the different style module too These lights they've got two different kinds of ways of turning on I guess one would be activation off of a normally open or normally closed magnetic switch or a Remote so this one is going to be the What size light is this what it is the like the five foot the four and a half foot light something like that That's gonna go inside the hutch and then we've got two different modules This one is a wireless module We'll be keeping that one for a later time because I want this one to Open when the switch comes on or when the hutch comes open the switch contacts are connected So that's a wireless one and then this one is going to be our wired one with a magnet Switch so as you can see here on the module you've got power that comes in the magnet input and the output to the lamp So then the sensor It's gonna be this one right here And all you got to do is This magnet's really strong when it goes up to it that turns on your light So we're gonna put this thing up Here mount it up there and then this these boxes also are magnet It so we'll be able to magnet those up in the corner of the hutch and then put our switch plate right here Put that here so we have some light right up in here and then the magnet against the inter-steel panel of that The lights for the cabinets we actually got those on order because they were the wrong Whatever got my computer hooked up and then the wiring will bring you guys around This thing is kind of bananas for the back. So I've got The orange power wire coming up Into and it feeds the back of here So then there are two outlets on the back of the top That one over there goes to that keyless entry this one goes up to a Power bank a surge protector Where I plugged in everything from my computer. I've got This power for the power drawer there have not yet hooked up the power drawer for that one. You've got the Locks for this one the echo locks for the top plug in here and the echo locks for the main box plug-in right there so In other words, this box takes a whole lot of power. You wouldn't ever thought that for a freaking toolbox, but it does so gotta get that going here and We'll figure out what else we got to do All right, so the last thing we've got here is our handle snap-on handle to go on the side of it This thing is a really badass handle, especially compared to the ones on the other boxes over here Like that one. This one's like twice as nice I'll put it on there, but I'm gonna wait until after I get this thing put in place I know which one I which side I have more room on but it will mount to the sides On the cabinets there, so that'll end up looking pretty good, but It's done and it looks glorious Absolutely glorious. I just Checking that thing out. It's a big old wall of awesomeness. I Still can't believe that I have this and it's finally here after 19 weeks 19 weeks guys and it's finally here. That's how you put it all together Aside from the lights, like I said, we got those on order. We had a couple little things little brackets and stuff on order Gonna be some cool new future videos for you guys. Hope you enjoy. Thanks for tuning in and you guys stay awesome