Upload

Loading...

Tower Hobbies Razor 3D RC Plane Review and Flight

15,156

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on Sep 19, 2011

This is the radio controlled glow or electric powered, almost ready to fly Razor 3D .46/EP Aerobat from Tower Hobbies. For modelers 14 years of age and older.

FEATURES: Construction: Balsa and plywood Wings: One piece, attaches to fuselage with 1/4-20 nylon wing bolt Aileron Control: Dual servo Covering: Top Flite MonoKote Spinner: 2.5" (63.5mm) diameter, blue in color Cowl: Painted fiberglass Landing Gear: Painted composite Wheels: Foam, main 2.2" (56mm) diameter, 0.90" (23mm) tailwheel Wheel Pants: Painted fiberglass Fuel Tank: 8.8oz (260cc) Engine Mount: Two-piece composite Warranty: Tower Hobbies guarantees this kit to be free from defects in both materials and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.


INCLUDES: ARF Razor 3D .46/EP Airplane with Fuel Tank, Landing Gear, Wheels, Engine Mount, Prebuilt and Covered Wing, Fuselage and Tail Sections Decals and Instructions


REQUIRES: Radio: At least 4 channels Servos: 4 standard size & torque, 5 if using glow engine Receiver Pack: 4-cell 4.8V 2000mAh recommended 12" (305mm) Servo Extensions: Two for aileron servos 24" (610mm) Servo Extensions: Tow for elevator and rudder servos Y-Harness: For aileron servos, if using a radio without mixing Glow Power- Engine: .46-.55 2-stroke OR .70-.81 cu in 4-stroke Glow fuel and Propeller Electric Power- Motor: Brushless outrunner Motor Mount ESC: 60A brushless compatible Propeller: 14x7 electric Battery: LiPo 11.1V 25C, at least 3350mAh Battery Charger: LiPo compatible Building and field equipment


SPECS: Wingspan: 52" (1,320mm) Wing Area: 579 in² (37.3 dm²) Weight: 5-5.5lb (2,270-2,490g) Wing Loading: 20-22 oz/ft² (61-67 g/dm²) Length: 54.5" (1,385mm) Center of Gravity (CG): 5-1/8" (130mm) back from the leading edge of the wing measured at the fuselage Control Throws: Low Rate High Rate 3D Elevator: 1/2" (13mm) 7° 3/4" (19mm) 10° 2-1/2" (64mm) 37° Rudder: 1-3/16" (30mm) 11° 2" (51mm) 19° 3-1/2" (89mm) 36° Ailerons: 3/8" (10mm) 7° 5/8" (16mm) 12° 1-3/4" (44mm) 34°


This plane can be purchased online from Tower Hobbies at the following link.

http://www3.towerhobbies.com/cgi-bin/...


Please remember to Comment, Rate, and
Subscribe to support my Channel.

Thanks,

Eric Jordon

My RC website.

http://www.AroundTuitRC.com

My Video Editing Tips website.

http://www.AroundTuitVideos.com




Music: by Kevin MacLeod (incompetech.com)

Loading...

Advertisement
When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...