 What's up everybody? Welcome to the edge of tech right here. My name is Jim and it's been a long time since I streamed It's been way too long way too long Hopefully you guys can hear me. You can see me. Okay. I am solo tonight. So we're rolling with it Kind of different. I haven't been here in a while. I mean we stream every Monday on hot makes but that's definitely a different animal So a little bit different than normal blast. Oh, how you doing? Mika Steve? Thank you so much for joining the coffee fund Andrew Rogers. I see ya Who else was here earlier? Everybody's here. How you guys doing Jeff Hutchinson blastos with us How are ya? I? Welcome all the members. Thank you guys so much. I really appreciate that every little bit helps We're gonna be doing a lot more content soon, and but it's already started. So I got a bunch coming for you Sounding good and looking good. Thank you. Thank you Andrew Rogers. Thank you so much ten Dollars you rock man. Thank you. Thank you. I Really appreciate that Looks like a taz clone kind of there you go Andrew And it has been so long since I I streamed I better see what nightbots up to you because I forgot before the stream But how you guys been? Jay hello from Sydney, Australia. Welcome Jan G. Glad you're back. Thank you I'm happy to be back. Hopefully we're gonna start streaming once a week Fingers crossed. That's my plan. I'm hoping light speed Steven. How are ya? Steven's killing it lately A lot of cool stuff out there Let's see if I can find these Man it's been a long time since I played and I don't even know what's out there anymore Good good good good good Good okay Well, we'll enable that one too perfect just want to make sure nightbot is doing its job What we're not paying it for Andrew s it's hail here and snowing 80 miles away. Whoa hail there snowing 80 miles away. That's crazy Good day at Jay from the other side of Oz nice Andrew Osmond. How you doing Freddy? How you doing? Stock 3d printing. Hey everybody Just turned up the radiator it's freezing nice. What are you guys drinking tonight? Let me know in the chat tonight I got the bubbly. I like, you know, this is the lime bubbly and It kind of tastes like 7-up without all the crazy sweetness of 7-up. I don't know why I like it. It's good stuff But if I wasn't streaming I probably would be having a Guinness or two and Then Going to bed I Got I usually get up about 440 in the morning to go to work And I actually have tomorrow off so I thought you know I'm gonna stream But I've been up since 440 so I'm a little bit tired But that's okay. We're gonna rock and roll with you guys shock top awesome Moka latte sounds phenomenal Monster mango that sounds good Wombat, how you doing nom fam? How's it going Steven pool? How's it going? Thank you. Nice to see you too. Hey, my dad got a Tesla. I was gonna tell you Steven I forgot he got a brand new Tesla s and he is killing it. He's loving it He traded in his Relatively new a Jaguar XJ for the Tesla s and he's just loving it Spotted cow to drink my sorrows away. No sorrows Trent. Come on 440 that's bedtime. Yeah 440 a.m. Yeah, yeah, it's 305 a.m. Andrew. Holy moly Tyler West all the way from the Alaska's He's probably buried in snow right now Tyler. How you doing? I like your t-shirt. Where did you get it? This is a th3d t-shirt if you jump on th3d Studio.com I believe you can check out their apparel and this is a th3d t-shirt Did he get a plaid s? I don't know. That's a good question. I'll have to ask him. I can't remember. I know it's fast Hanging in there nice. Well, I tell you what everybody Nice Bacardi white Roman Pepsi this right here is the Kaewoo tycoon max and Some would say it kind of looks like a taz clone, but it's not Kind of has a similar shape you can't really see it it's kind of hiding back here But I have the sidekick back here from Loll's bot and it's kind of got that shape But not so much. So if I'm right about this, I believe one of the guys that helped create the CR 30 print mill Like left that situation and started Kaewoo and he's been killing it with some Kaewoo printers This particular one Is the max they said to me free just so you guys know and they said here do it You know do what you want. Check it out. Have fun review it. Whatever you want to do They did send me some brand new couplers and that these are what originally came in it. So anything Made before this year Or early this year. I'm trying to remember what date Had these couplers in it and these couplers Needed to be replaced. So they actually were sending replacement couplers. I got those in as soon as I opened the box I did not do an unboxing on this one Just I wanted to get it open and start printing on it Speaking of printing on it. I'm gonna check on it right now. It's on and there is a print that's supposed to start Burr, I'm kind of jelly nice Let's see what's going on here. We are at almost. Oh, we're almost gonna start here Looks like we're almost at 200 on the hot end and 60 on the bed. So it should start doing something pretty darn quick here I'm hoping the ZF set is okay We're gonna watch it for a second. I'm over here Mika that's funny. I like to have a kaiwu Jeremy bar $50. Wow, that's not even close is it? I don't know if you guys can see this. Oh, it's homing. Okay, good Jeremy bar $50. Holy crap, man Thank you so much. I can't thank you enough for that. Thank you so much. That is amazing. I really appreciate that BB's 30 do there you go So it's it's homing right now and Theoretically, this was a SD card print. So we'll see I just wanted to start it because I haven't printed this one yet Theoretically it should do a BL touch sequence. It's not doing a BL touch sequence. I was wrong There is a BL touch and I thought maybe they would have programmed that in But I do see that it's way too close Holy crap, let's see what happens here It looks like this is gonna be a We're gonna let it fly we are gonna let it fly We'll see what happens and Rosman 499. Are you out of your mind as Joel telling would say thank you so much I'm working on getting my under three max tuned up. That's awesome. I Love my under three maxes so That definitely need to set the Z offset on that so I'll have to work on that after the stream But it looks like it's a cube. We're gonna check out a cube today. Looks like the Lowell's butt made love to an under three All right, I like it again Jeremy Barr. Thank you so much Andrew Osman. Thank you so much Earlier Andrew Rogers hooked me up. Thank you so much Andrew and Mika Steve joined the coffee fun So, yeah, this is This is the kai wu so it came with some stuff like I said I replaced some couplers as you can hear. It's not too loud I think The loudest part of this thing is definitely the Z access it's it's kind of loud, but I'll get over it. Otherwise, it's not terrible. It's direct drive It's got a lot of cool stuff. We'll pull up the stats here in a second over here it came with SD card It came with the extra end stops in here some extra springs Of course, like I said the replacement couplers now the new ones don't need the replacement couplers They earlier this year they started doing that from the factory Let's see oh glass it does come with the glass that everybody's using now says kai wu 3d on it and it has clips I'm not a huge fan of clips, but you know, it's what it has and that's what I'm gonna use for now I probably will drop a flex plate on this thing if I'm honest I think I love the flex plates. I do. I just love them. I usually get mine at th3d I Can throw some stuff in the description when we're done here. There might be something. I'm not sure Oh Trying to find time to get my cr6se work and do it those are awesome I have two of them hiding right down here behind me and I really like those check out the community firmware It is it is an awesome firmware that just it's way better than the factory firmware on that Can we get a zoom on the extruder hotend cable management? How is the quality of the mesh wire zoom? You give me a second. Let me see if I can make that happen. How big is that? It's this big Let's pull up some stats because because we're all talking about them and I want to show them on the screen Let's make sure We get all of the right stuff going it is a linear rail kit at least on your x-axis there So that's cool that it runs on linear rails Let me see what I can do. I'm gonna pop out I'm gonna pop out this and then we'll share we'll share this tab. I was just reading Wombats comment. That's pretty funny Let's go here so I'm just gonna make this full screen and Hopefully you guys can see that we just perfect so You can see right here, so this is full screen This is a 300 by 300 by 230 millimeter build size. It has x linear rail like I said Some stuff they tout it's 32 bit. It's silent. I would say mostly silent Wi-Fi transmission I have not tried that yet. We should probably check that out Industrial grade. I would say it's pretty beefy. It has some handles on the top that we'll check out in a little bit Stuff like that. You can see I'm actually up here with the handles. I really like that It was super easy to move that way Automatic bed leveling it uses a BL touch for that Obviously, it's not programmed into their starting g-code because it didn't it did run on this cube that started which was weird What else we got? Oh, it does have a filament run-out sensor and the filament run-out sensor is right above the input of the hot end which I absolutely like that I love that so much more than it being up on the top by the filament So let's take out. Let's check out some pictures here the Wi-Fi transmission method. There you go. So Looks like you can connect to it through Wi-Fi It is super simple to build. I did it ahead of time because I was printing on it before Today, but I wanted to show it to everybody. You literally pull out the number one here You set it on its side. You bolt in number two and then you throw the filament Holder on the top the school holder and you plug in your cables and you are done there is a picture of the extruder so you can see Right here your filament run-out sensor sits right above that metal extruder. It's a red metal extruder down under there goes down into a hot end And then you know out the bottom now I did not take this apart But it really appears to be the standard like creality style hot end if you can see the red here If you zoom in you can actually see the red heat break back here. I could be wrong on that I didn't take it apart yet But you know that could be again, this is your red or aluminum Extruder so metal extruder and I think someone was asking about the loom and that's what the loom looks like right here Kind of goes up and holds all the cable in there Mine is probably a little bit looser than that one shows in the picture but nice Nice stuff there. I'll get to your questions in a second. I'm not watching comments currently on full screen on Full screen on this so they looks like they come up. They have a flex plate if you want it It looks like Some PETG here's another flex plate some silicone socks so a bunch of stuff you could get from them, which is pretty cool Now let me jump over so like I said be I'll touch runs over Wi-Fi Be a Kira it looks like So if you use Kira you can do this over Wi-Fi which is cool linear rails 32-bit board it does have a really nice color touchscreen that works pretty decently Let me jump over back to you guys and let me see What you're saying? Yes, I don't miss something How big is that good okay trying to work out what the green box on the top grant you was till I realized It was a low spot. Yeah back. Here's the the low spot 747 24 volt system is it let me double check that Single gear with an Euler not ideal but usable Aaron Rodgers. Yeah. I mean the dual gear ones are better I'm sure you could drop one in The nozzle kind of looks like a v6. I think it's an MK8. I'm pretty sure it's an MK8 hot hot end as well Matter of fact I'll double check it in a minute here, but I'm I'm almost a hundred percent positive. It's the standard MK8 Style that you see on the Creality machines as well 24-volt system, let's go look I you know, let's see if they call that out on Kiwis page here 350 watt power supply it looks like and it is 24 volts. Yes 24 volts it says the bed temperature is 110 and nozzle temperatures to 60 is is what they're saying from Stock from the factory there is a dual Z With dual motors so that's that's cool And we can check that out too it says 80 to 100 milliliters a second Not sure about that, but it I mean I haven't tried it yet, so I can't I can't say that so let me drop this back down. There we go Speaking of flex plates about to order from Wham-Bam. We'll be interested in seeing some prints Do it Wham-Bam is also good stuff Peter and the guys over there do a good job on their flex plates for regular and resin I prefer the TH3D flex plates, but that's myself and full disclosure It's because I'm an affiliate from them. So what I do Full disclosure is anything I sell anything you guys buy through my affiliate links I tell Tim and company to keep the money and then I spend it all back with Tim and Company because I like to support his small business. So instead of taking any money from Tim I just get it in credit and I buy stuff all the time with that Which is awesome for me because I get parts and stuff I need like flex plates and magnets and all that But You know and it goes back to Tim and in the long run, you know, so it helps him out, too That didn't sound great. Oh The print broke loose So we'll stop this and we can look at some other stuff probably Wham-Bam on the v2 last week and love it awesome. So I'm gonna hit stop print and we're gonna see what it does here So it did lift and now it's cruising over to the home position. I just I always like to see what it does Yeah, I liked it to get out of the way. It presents the plate forward, which is great. I really do like that, too Get clears your hot end and right now just shut everything down The only thing running right now is the hot-end fan and the hot-end fan Is not that loud other than that everything else just shut down Yeah, the first layer was terrible that the Z Z was really bad I should have I thought it was gonna probe and we'd have time to check that but I didn't let me show you real quick I'll bring it up West Sydney, Australia, hey, how are you so this Show it. There you go. You can kind of see it Maybe that first layer was absolute garbage Mostly because well, how why are you there we go? Mostly there you go mostly because I didn't have it adjusted there I thought it was gonna probe and it didn't but that gives us time We can pull this thing apart if we want to see really what hot-end it is if we want to Sydney, Australia again, welcome the Jolly Frog link If Tim sold a flex plate that is black instead of blue I'd highly Inclined to it actually you could I Want to double-check because you could actually take the easy mat which I love the easy mats They I mean, I'm talking stuff sticks to these things so good. You could take an easy mat And stick it to the flex plate. I believe That's what I used to do on almost everything actually just cleaned up and put a bunch away, but Basically you take your easy mat and you stick it on the flex plate and You got a flex easy mat and it's black. I believe Unless they changed it again, but I'm pretty sure it's black What is new or innovative about this 3d printer? Man, that's a great question. It's a 3d printer. No Some cool stuff. I like about it. It has adjustable feet on the bottom. So Down here, you can actually adjust it and so, you know, so it's not rocking and stuff Obviously, you're not gonna set a level on this and level it because that wouldn't matter The only thing that matters is that your ex-gantry is level to your bed I did home it and I did check after I put the couplers in that this side and this side are within 1mm or less of each other. I like to get them dead on if I can This particular one was high on this side by right under 1mm So I'm okay with that and it has the BL touch that will compensate for it anyway New or innovative, you know, it's a pretty sleek design as you can see all the electronics are housed in this side here Matter of fact from here. I can see a mean well power supply That is against this back wall here I can see the board Kind of sits right here Actually, there's your it's the actual I'm sorry the board sits up top here and obviously your screen sits in the front The nice wire loom they do I Mean it runs on rails. So if you can see this these are rails. It's not V-Wheel It's not wheels on extrusion. I think that's a toss-up people love them and people hate them It does that on the sides too. So it does have dual In here it has dual Z motors. It has dual Z lead screws with both of them. Do you have a? Yeah, they both have The couple were to stop them from dropping also it it rides on those rails up and down as well So if you like those rails this thing rides a lot you you have to grease them. You got to keep them nice and Oiled that way, you know, they don't dry up and they don't squeak and you start yelling at you It's super solid. I mean this thing is built like a tank very strong Let's see what else is innovative Something like you can't see it dang it. I Just see if I can get another camera set up. Let me just check something So I only hit oh, you know what I don't have it with me. That's why I didn't set it up I only set up one camera today because I forgot. I don't have my other camp I have a little webcam that I usually can show stuff with and I didn't get it out here tonight. So Where was I so the hot end has the knob on the front and I can bring back pictures and If I turn you can kind of see now you can't you can kind of see red right here And what that is that's actually your extruder knob So they actually bring it out with a piece of brass and then they put a big knob on it I am Pretty sure that's an MK8 hot end in there We could take off the four screws and find out probably Maybe we'll do that It's solid. It's like I said, I mean it's printed pretty decent. Let me show you this is a little bird That's on the thing big boy. Yeah Pretty good size. Let's see Don't don't turn on take it apart. Yeah Let's see It's not an under three clone that is exactly Right, so that's kind of part of nothing pop nothing wrong with the ender, but there's so many of those out there I agree so this I Can show you this was the first print I did right off the card So not too bad. It's a little bird whistle You can see through the eye there, you know, not too much stringing or anything in the middle. It is hollow So that's cool But not too bad for print right off the card, but I expect all prints off the card to print good So there's that Also, it printed this little ghost off the card And this was a nice fast print. I really liked that. It was like a less than 30 minutes and There we go It's pretty good That was the first layer on that one much better than that other one And there's that Let's see. Yeah, so, you know, it's someone hit it on the head there I think it was Andrew that said it's not an under three clone. You're you're right about that You know, I I love my under threes. I've made a lot of videos on them But it's also awesome sometimes to not get one That's the same all the time and this is that I mean, this is totally different What else do we got have you tried the g10 material bed surface to print on I have not off to check that out It's a really good printer for a Chinese printer light speed said, you know what? For a Chinese printer so far it's been really nice Is it open source runs off Marlin 2.0, I believe it is running off Marlin and If I remember right I don't know if they have the source code out yet. I need to go look I didn't look before the stream which I should have but I'm it's definitely running Marlin Three and a half inch color touchscreen There's that Upgradable functionality. So apparently there's upgradeable functionality you can get Roadie rotary feed system. We talked about the dial on the front there Yeah, I have to double check into that So There's the bill touch There's the wheels. Let me let me share this again And I'm gonna I'm gonna kind of jump away from chat just for a second so I can share the screen, but I'll double check There's nothing I'm missing Looks out if simply has a good motion that's a plus I'd like to see if it has z lines or not any info on the motherboard and stepper drivers Oh, I don't know if I can get to it without taking that whole panel this whole side off I'll have to check that out But let me see if I can look in there. I cute. It's tight in there pretty good And I'm not sure if we can get to it without taking that whole side off Let me look into that Do a let's do a thermal runaway test Okay, I'm in tie a rope to it have a really nice boat anchor if it doesn't put yet. There you go Is it bulletproof? It could be Swapping a dual gear extruder and by metal hot break and I think it would be legit as a contender. I you know what? I'd have to say I Agree, it definitely needs a dual gear extruder and you know what you dropped a mosquito in this thing And it would be sick drop a you know kind of like Lulz bot did over here with that Bontek Extruder and the mosquito this thing would be this thing would be off the chain. It's super solid That that's an idea Not bad Discord URL and the message above not working for nightbot dang it. I may have to check that out Same here. Are you running the updated firmware your interface on the updated firmware is nicer? Oh, I hope to check that out. I have not updated the firmware yet out of the box so EU Not to the UK is 5 49 USA is 5 49 as well. Everything is 5 49. I'm looking at the prices here Oh, yeah, I was gonna share this screen real quick Let me go back to Let me go back here and share All right little full-screen action. Hopefully you can see that there we go You know what I need to go here and make this thing full screen there we go All right, so let me let me scroll down here real quick. I want to show you this I know it's in front of me But I want to show you up close because I don't have that second camera with me tonight So like I said three and a half inch They call it an HD touchscreen of course We talked about the Wi-Fi. We talked about the meal touch if I keep coming Wolverine likes it There's your hot end. There we go. It's a little closer zoom in a little better shot of the hot end And you can see back here That right there is definitely got to be an MK8 It looks just like it So there's that It's pretty big actually, isn't it? We're gonna take it apart. We'll do it. Why not? Here's that wheel. I was telling you about here. So what they do is Right here they bring a Brass or what heck probably is brass a little rod out and they connect it to this wheel so you can easily turn the wheel There's your glass there Let's see Double stable to ensure no wobbling and shake I gotta say this thing is built built like solid if you if you drop those legs down so it doesn't wobble It's not going anywhere The rotary feed like we talked about there's your color touchscreen. I'm gonna have to check out the new Firmware so we'll have to do that I'm assuming we'll have to do the screen as well I'll check out the Wi-Fi to because I haven't played with the Wi-Fi yet There's your filament run-out sensor resume printing So it looks like you can add octoprint To it which is cool and maybe an octoprint camera. I'm guessing Auto shut down From octoprint and that that's kind of cool. Here's everything that came with it your feet Handles all that good stuff. So yeah, I mean I Think I think it's pretty solid as far as my testing so far There we go, let me jump in here am I missing something. Oh, let's see. Ooh the fetus dragonfly hotend Controversal Hello to everyone from the UK. Hey, Jessica. How are you Jessica Ryan? Hopefully you're getting a little sleep It's like late late out there too same thing with Andrew Shane is it who or whoops? Man, I buy too much to stuff from who the heat sink is integrated into the Extruder it's all Let me just check this out of It's all one piece except for the tensioner arm got it So Kevin must have one Kevin Schofield. I might have to check out doing the firmware. I'm assuming Let's see. Did they put a little slot they did Nice so there's a there's two Slots Kevin if you did the firmware, but my assumption is Let me turn this here so if you look at the side here, there's a Micro SD up here and there's like a full-size one right here My guess is the full-size one is going to be for our firmware, right? Because that's right where the screen board is and the micro SD there nice Mondays King, how are you so my get this back in the frame? Well, there we go So I'm gonna have to check out the firmware. I'm gonna I want to check that out, too I'll look that up and see if we can get that dialed in Any other questions, I mean So far we had we had questions. What's new? What's innovative? What's is it strong? I believe it is myself I mean, it's it's built like a tank. It's really sturdy. Obviously the sheet metal You can hear it there So it's not plastic. It's bolted into the extrusions Yeah Solid solid and Kevin says it. Yep. So must that that's an awesome thing So we were just talking about firmware and a lot of times for instance on the CR 6 se You have to pull off The the screen and unscrew it to get to the board in this case Right here looks like the SD card slot to go in to update your screen firmware And the micro SD is right here. Excuse me Also, your USB is right here The rest of these are just screws There you go. So, yeah, I mean Overall solid I'm curious about Upgrading the firmware now because Kevin says it's much nicer once you do. So let's just let's just go see what version do I have here? I don't know what that did but that was awesome. Let's see back back settings Language about so it looks like I have firmware version V2 dot zero dot three dot one So I'll double-check and see What is out there and we'll get this upgraded because why not? Doing some research. It's pretty awesome to do in the review perfect timing welcome Positive and negative wires soldered to the back of the bed For the heat mat. Is it is there a wire restraint? Oh, I know what you're saying So that's kind of a trick question, let me I'm gonna unplug this Let me get it unplugged. So it's actually up under the center Just gonna get everything out of the way a little bit and I'll see if I can turn this bad boy over Um Give me one second and we'll show that the Don's doctor. What's up? I? Made sure I got an SD card extender cable pain That is true. It is a pain and it makes it a lot easier when you get those extender cables especially on the CR6SE Nice Awesome, so Brian Vines, how you doing welcome Brian Vines So if we flip this up like this You can see it in there kind of now you can't kind of see it in there, but you can So the the heat bed actually goes right here. It's not on the back So that is a different style It is inside of the bed plate and there is it's soldered on and And Now I'm really curious There goes a clip It's soldered on and there is like there's this a kind of a Strain relief in there. So it's the strain relief. I'll explain it in one second here Get this tipped back up. So the strain relief is in that it's the bottom of the The plate here it's kind of like a honeycomb and The wires go up through that honeycomb and then they get soldered in so It's kind of like holding itself up in there and then they're soldered in so that's pretty cool So I would say if there's some strain relief obviously it's not like Zip-died to the back because it's not in the back or anything, but it's also different because it's up in the center It's not in the back. So it's it's not going to get caught on anything back here That would be to me kind of a earlier someone asked what's new and innovative. I got to tell you I don't think I have another 3d printer here That has the heat bed connections in the center, you know underneath So that's something different Brian vines like I said, how are you? They tell I'm adequate nice Attaching it to the bed plate and then under the bed is probably the best way Yeah, it is it's it's kind of run up through the honeycomb and then soldered up in there. So You know without hundred two hundred three hundred hours of use I couldn't tell you You know right now, but from what I see it's not just wires hanging off the back and that makes me happy That makes me happy nice Got the pun master in the house But yeah, I mean manual it comes with is pretty decent it's very thick it's color and It's For the most part, you know pretty good manual I'll show you. I mean, it's it's very thick like cardstock kind of paper You know kind of walks you through Yeah, you can kind of see it there kind of walks you through the whole process in Looks like Chinese and English yeah, so there's that There's the you know the homing sequence and all that stuff is in there so the manual is not bad There's a Here's your troubleshooting guide. So, you know if you're having issues you can jump on and and You know look at look at knees Which is actually a kind of a cool idea as well Here's the board, okay So if you wanted to see the board they actually put a picture of the board in here, let's see if I can zoom it in See there you go So that is the board they're using in here There you go, I'm curious about the drivers I don't know if they say what drivers are using so I'll have to check that out Obviously, I'm standing way up close to the camera here. Also. They give you this nice little kawu card There we go, and it's just like thank you. Welcome to the family Your support means a lot as a new startup We're always trying to make a name in the highly competitive 3d printed market We cannot achieve this goal without awesome people like you We hope you can enjoy our product and create amazing memories with it If you have any questions and they tell you how to get a hold of them so so that's kind of a Nice little personal touch that they're doing in there goes out to everybody. I believe it's in all the boxes but I definitely Um Things I like about it right away. I like the durability. I like to build it is like we talked about a couple times now It's strong. It doesn't move. I mean this thing is pretty dang solid here Unless you lean it back on the There we go on the spool holder It is the Creality spool holder That's why yeah, I'm not surprised to see some other things on here that are probably Creality or similar parts Gives you a smaller foot put because you don't have the wires looping out the back. Absolutely. I 100% agree. So, you know when you push it back That's that is what it is when you push it forward also same thing now one thing I wish they would include and they didn't is a little bit of the grease So you could grease your rails because you are gonna have to grease your rails on this I Have grease up Over here Where the heck did I put it now? I have grease over here I must have moved it for a couple of other printers the CR 200b I believe came with some also the adventure for I believe dead and You know, I think that's a really good thing to include because to be honest a lot of people that get Printers, especially if you order this aren't gonna have a little jar of grease laying around right away I mean, if this is your first printer, especially I really like using that PTFE lube so Brian anybody else out there to let us know what you guys like to use to To kind of grease up your rails, but in this case, I really like the super lube. It's silicone lubricating grease PTFE and It looks like this That's what I like There's many different schools of thought on this Angus what's happening man? Angus for makers muse joins us There it you you know what I probably have three or four fellow Australians in the chat with us tonight as well. So welcome Angus. Hopefully everything's going good with you Love to see the birds Let's see. Let's see. I had another fan melt on her Mara tonight. Wow time for a wobble pop So time for a wobble pop and time for the couch. Nice super lube. Yep. That stuff is great I do I like it a lot. It has the PTFE in there. It's supposedly food grade. So don't eat it I mean, it's food grade, but I wouldn't eat it still All we need is teaching tech I should chat Michael Michael It's perfect time slot for late lunch. Nice. I like it Well, I got to tell you hot makes is the perfect time slot for your breakfast So, I mean you're on a couple times in August again. Thank you so much for that. We had a blast Maybe we'll have to talk to you and get you back on before Christmas here and have some more fun with that Joel telling will be with us Monday. So if you guys want to get on Monday night 6 p.m. Central on the hot makes channel. I'll post that in the chat here in a second Joel telling will be my guest host We're gonna have some fun with Joel and feel free to come on and taunt him as much as you want, you know He likes being Taunted, you know as we have some fun Jessica Ryan as the has the printer got thermal runaway They claim it does we try it. Maybe we should try it Let me grab this link for hot makes and Drop it in the chat for you guys Boom, so come find us on hot makes channel there and Monday night 6 p.m. Central Which I think is right around like nine or ten Australian time We'll have Joel telling on so come join us Monday for that. That'll be a lot of fun. I like your shirt Yes TH3D has this shirt you can check them out through one of my links. I can I can grab a link for you, too Let's see I've actually been on a stream with Joel awesome He's a good dude as Same as Brian and and Angus as well. I've had the bed throw a couple thermal Thermal air a couple times when it was slow to heat up. So there's that I mean theoretically we could Hmm, how can I test it because I can't really get to the wires to pull on if you haven't a Suggestion I'll test it. I just can't really get to the wire. I would normally just like pull the Pull the wire out see what happens, but Unfortunately, I can't get to them on this one I will official. Hey, Kai Wu. How you doing? Hi, Jim Joyce here. Just check the email and see you doing the live We're doing good. Thank you to join us Joyce So yeah, Kai Wu official, maybe you could answer so a couple of quick questions Do you know what drivers the stepper motors have on this? also, I'm assuming thermal runaways as is on the question is does it work and If someone has an idea, I'll test it. I'm just not I can't reach the Cable just to pull it Or the wire Otherwise, I would just pull it So if you have an idea on how to test it without pulling the wire, let me know we'll try it. I'm always up for it So many good 3d printing channels to follow absolutely and I suggest following them all and Watching everybody's videos I mean, there's so many videos to go around and in my opinion you want to get as many opinions as you can on Machine if you're looking at a machine Maybe you're looking how to do something and that's a little different a lot of us go to YouTube to learn new things So, you know, how do I? Whatever crush this can or something, you know I could search that in YouTube and then you know a lot of us go to YouTube for that and a lot of you guys Find the videos for my ender series and all that stuff, which is amazing, but there's Brian vines I Don't know if there is an XT 60 under this one Let's look I Think you have one of these don't you Angus? Anyways, Brian vines does some awesome videos Super cool stuff with electronics as well and has some really good tutorials Angus obviously on makers Muse has some Just awesome cool stuff like the thing I'm in right now is a little I guess you call it remote control vehicle And all the crazy wheels that he's printing that everybody's submitted. I just love that right now Under the bed for the power heater. Let's look. Ah, yeah, yeah to Shay And I think if I remember right Angus did a video I think Angus did yeah, that's what I thought I'm pretty sure you you were talking about doing it or you had one. That's what I thought Well, you're busy you're busy and and and when Angus does a video he tests the crap out of them first So, you know, it's gonna be awesome All right, let's fire this thing up. Let's heat it up and then I'll pull the XT 60 connector And we'll see what it does. I like it Preheat Let's see here extrusion heat bed What do you think we'll go to 60 C? all right, it is Currently heating up I think Preheat. Oh, all right. I have it set to 60 C now so now we just wait I'm gonna let it heat up and There we go, I'll let it heat up and we're ready. I'll pull that XT 60 We'll see what he yells at us. We should yell at us, right? We have a shiny new discord, but the link doesn't work someone said so let me shut that off for a second Up to go create a new What's it called a new invite for that one? Boom, there we go. Bye nightbot. Thank you Two kilograms of PLA through it so far. Holy moly that is awesome. That's a lot more than I've done so far Also angus did you get your PETG thing fixed? You still hate it or did you find something that it'll print on nice for you? I'm curious about that. We haven't talked. I don't think we've talked since we We talked about the PETG thing on the hot makes and I'm just curious I know some people threw a bunch of suggestions out there. So that's funny I've learned so much from you all did my first motherboards swap and TFT upgrade last week. Awesome. That's that's great That's what this is about Checking us out all the channels out there learning and then taking everything you've learned in a combination And then doing doing your own thing, you know That that is all you know, that's what this community is awesome That's what this community is about if I could talk it's awesome, you know, where everyone's willing to help And I wish I had more time to respond I apologize if I haven't responded to you on one of the social medias or or Email or something that's just been really crazy the last like two months now No worries take your time revealing the machines will be glad to seeing any suggestions awesome So I appreciate adding the couplers So my machine I had to change out the couplers. I'm not sure if Angus did But I thank you for sending those and giving me the heads up that I needed to change them out nice I swapped to g10 and never had PET just there you go That's awesome How many pooline shapes does two kilograms make I like it? More like how many squid game masks? Yes um makes me wish I uh was a content creator all kinds of printers to test New machines test, you know, it's a blessing in a curse. Uh, so I love it. It's fun. It's a lot of work Andrew Rodgers, uh, it's a lot of work putting time into videos and editing and reviews and um and that and then You know, you do get printers, which is great But then printers fill up everything and then you have to start getting rid of printers And I'm on a much much larger scale Angus probably can attest to that. I know brian vines can um But uh, all right So we're hot. We're warm Let's see. Here's our x t 60 connector up front here. I'm gonna walk around the front Um Yeah, literally thinking is a blessing in a curse. Yeah, I I love it. It's so much fun and we get to do so much cool stuff At the same time It's a lot of work too, but that's okay, right? so I have Just pulled the x t 60 and i'm waiting Let's see what happens Now I don't know because it was just in a preheat like, uh, I just heated up the bed um I can see it's dropping Quickly now like down to 46 I have nothing yet But we'll see it hasn't really done much yet I wonder if I could have pulled the uh thermistor cable too I could have huh why not Which uh, which squid game model are you using which squid game masks? model are you using? That's what i'm curious about. Okay. There we go. I pulled the thermistor It went to zero like immediately and it gave me an error three on the screen just a heads up So on here, there's an error three currently And so It did shut everything down. It went to zero immediately So that to me would say Tell me that uh thermal runaway is on on the bed So I plugged it back in right now It's at 44c and zero Is what it's you know trying to heat to so uh I would say thermal runaways enabled congratulations kawoo Nice work. Um So Thingiverse, uh, man, you mean thanks. We could search things which is a sponsor of this channel I got to thank things for being a sponsor on the channel Also, if you check out this this is co-ex filament co-ex filaments made you right here in wisconsin where i'm from awesome awesome filament if you haven't checked it out uh both great sponsors of the channel and uh You know I could do one of these real quick. You ready? I'm going to jump in right here and tell you today's episode is being sponsored by fangs fangs is the biggest growing 3d community with over 2.3 million available models already One of the really cool models available at fangs is the new Wexter mini gym if you guys have not seen the mini gym that wexter designed all you have to do is type in mini gym You'll find the stl Right here on things you can download it and print it for yourself. Thanks again to things for sponsoring this video You can find the link in the description below if you want to check it out now back to the video I forgot that one's for the video, but that works There you go, I love it so good. So uh thing. Let's see let's go to things and type in uh Squid game so I'm I'm only on like episode four. So if you're watching a squid game, it's awesome So far. I just if anyone's watched I'm not giving anything away at all. I'm just gonna say the one I just got done watching was rough And it had to do with marbles and that's all I'm gonna say. Um I just typed in squid game And there's a whole bunch of uh logos already that popped up some really cool signs Um, there's a gb squid game And it looks like there's some masks on here. So I'm gonna have to jump in and uh Check it out and maybe I'll do one on here. That'd be okay Let's see. What else any other questions we got? I mean anything kai wu's with us. Um Let's see brian vines is with us maker muse angus is with us as well And a couple other people that have the printers. So I know Kevin has one Kevin says one suggestion will be to change the firmware so motors cannot turn off during a filament change while printing lost a three hour swap Oh, no Swapping filament and lost position. Good point We don't want the motors to drop that would be bad. Luke cat fields with us. How are you doing? Uh Luke go ahead whatever you want man. Are you critique away? I don't know if you have one or not But if you do let us know Luke cat field Is an awesome Help in the community 3d printing community and he he rocks. He put that put together a heck of a guide That's how I started my channel Because luke is the man Shane let's see have I made it up to coax his new place. I haven't I'm actually gonna you know, I should chat. I don't know what time I'm gonna be there But I have to be up in city close On friday, I was supposed to be off friday and I have to go into work now and I have to go up to The manna to walk wisconsin to walk through a hospital. Um, and I don't know if I'll have time or not. That would have been a great day to go up there though Print one of the included demo models first the bird whistle is nice. I got it right there Bird whistle is awesome. Yeah, I and you know It uh, it came out very good. Uh, I I was pretty surprised And I mean it's a bird so There you go We looked at it a little bit ago, but I'll show everybody one more time. It came out pretty good. Not bad at all Not I mean the snow stringing through that eye very very very little. Maybe a couple wispy ones, but that's it Which is awesome Uh, ks. Cortek is another great one to follow absolutely ks. Cortek rocks um Chelsea and garret They actually modeled the geery Model which is from our let me see if I can get there we go from hotmakes They modeled geery and it comes with a sweet base. You can get this on things as well So you drop it in there like that and then you can you know position it anywhere you want, which is great um So ks. Cortek they they put out a ton of new stuff Last month and a bunch of new stuff this month on their patreon, too Heck i'm blind No, it's okay. You wouldn't have seen that the little ghost is cool. So we talked about this a little bit earlier I really like the ghost, um For live streams like this because it it's 30 minutes I mean, it's such a fast nice quick little print that you can do in a live stream Nobody wants to sit in a live stream for six hours Not nobody almost nobody, you know while you print a giant elaborate, um cat or something, you know So awesome job on a little key chain. That's a quick model that we can show off during live streams Let's see think of verse I can follow teach tech makers music says it's easy to find Yes, thanks is awesome. Check out things you can even search by geometry Which is really cool. So if you just want to like print something that's a square type and square ones and you get a ton of stuff um Bird whistle. Yes the bird whistle Just to the east. Yes. Oh, it's about an hour drive. Yeah I'm an hour and 10 minutes from from manatewalk. So that's already going to be a long one Oh, we need to get makers music to a test on the hot end fix for creality 3d printers shameless angle plug. I like it uh Andrew rodgers. Yeah, he says yes the bird needs some biceps That would be awesome. Maybe have you guys seen the the chicken arms that people print because those are phenomenal The chicken arms are where it's at um Yeah, chelsea chelsea is definitely killing it with sculptober Um, I love it. She's tagging me on almost everything and and we're trying to retweet almost every day And it's she's killing it over there chaos core tech um We just have the community is awesome. We have some really great modelers great content creators and and everybody else Um, anybody earlier who donated the channel. Thank you so much. I really do appreciate that too. Thank you. Thank you. Thank you Scorpion Kingdom. Hi y'all So, uh, if you're new, let me know what you're drinking. I'm drinking some lime bubbly um Luke says I've done the chicken arms. It's hilarious. We need to get garret from 3d print farm Uh, to do the chicken arms and get him on some of his chickens. I'm pretty sure he has chickens there I need to get him to do that. If anyone doesn't know what the chicken arms is I need to I need to find this right now I'm out and do tea. I love it I love tea Um kevin jones, how you doing? Drinking water. Sorry for showing up like hey, don't be sorry at all Chicken arms Hi woo if you're still with us We're gonna look up some chicken arms real quick um Because this because this is amazing by the way all right, let me let Let me share this this is so good. I'm gonna share my uh tab here And we'll talk over this so, um There we go So let me drop the chicken arms in And that is oh because I need to maximize it here. I'll maximize the chicken arms and then I'll play it for you guys so There's the the chicken arms I'm hoping uh, it is showing right it is it looks like and here you go. Here's chicken arms So they're literally arms you can print for chickens And I highly suggest them because it is hilarious So much funny Oh, man, okay, that's that's chicken arms. Yeah It's so good. I'm hoping you guys are laughing in the chat because chicken arms is amazing Oh I believe you can find a chicken arms on fangs as well uh I'm looking right now as we talk because that might be my my next friend here You can try and escape from the arms. Yes Skeleton chicken arms crab chicken arm. Oh my god. Here. Here's what I'm gonna do I should be tagging what I should be doing is using my uh Track the link, but I'm not doing it. I'm just posting that right there for you guys things.com search chicken arms And have a ball with that your skeleton crab boxer chicken arms Chicken arms for fun. There's hulk chicken arms Oh my god, this is so good t-rex chicken arms It's so good Oh, let me know what chicken arms you think are best and maybe we'll print some Yes, cockatoo arms t-rex chicken arms so good Uh, just joined and just seen the video thinking on the right stream. Yeah tk welcome Um The previous maker Firmware had a function, but the 2.0 firmware can make it happen nice Kaewoo, can you get me a link to the firmware? Where can we grab the firmware from? I'd love to update the firmware here um Is an mk8 nozzle perfect. He'll bite my finger off before I get close It's it's all for the video man. It's all for the video Uh, if you can get arms. Oh my god, that would be amazing I need to get we need to get ahold of garret and get him to get some chicken arms on camera for us um Just 3d printed my first nerf gun. It's insane. I bet uh, absolutely love 3d printed nerf uh, or foam dart launchers of whatever you want to call them project fdl is amazing or uh, was amazing Um, and and they can rock and roll your nerf guns He'll bite my finger off. Oh, what do we got here luke? Luke sent me a picture Uh, i'm printing. Oh nice Looks like a carbonite um That luke is printing currently And he'd sent me a couple pictures of of chicken arms So good Oh So good chicken arms holding a chicken or a gun Whatever you want. I just think it's hilarious with the little chickens running around and they have arms. I mean um Oh, yeah, yeah, be careful with the bank stick toy prints facebook is Uh, crazy sanctioning people. Oh great So don't post that if you print it be careful. Um Um Make your vikings in the house. How you doing? Any other questions we got? I know we kind of talked a little bit about a lot um I did have the failed print because of the because of the uh It wasn't down The first layer sucked is why I is my fault I thought it was going to do the homing and it didn't and I didn't jump on that first layer Z height first fast enough also um, then I didn't start to reprint because we wanted to start talking about I wanted to you know actually be able to look at this thing. We did confirm thermal runaway at least on the bed is on I was able to heat it up and then pull The x t 60 and the thermal uh and the thermistor. I'm sorry from underneath there and it Turned off. So that's good Thermistor, is that right thermistor? Why not? uh James, how you doing man It's been a long time Do I ever do karaoke anymore? So, um James is a friend of mine from the karaoke world. He was he was uh all the way down to um karaoke world What was the usa finals I believe? um And yeah, no, I I haven't done a karaoke show since The weekend before we got locked down for covet. So it's been a long time Angus have a great uh day have a great day over there I appreciate you stopping in and saying hi over lunch and and we'll talk soon Hopefully we'll get you back on the show before christmas Have a good one angus. Um But yeah, I haven't done karaoke in a while. It's been a long time. I actually uh At the end of the year i'm done with the dj thing I haven't really said that out on the in the world as far as like on my page or anything But I just didn't take any shows for next year um thermistor mister. That's what I thought uh Two tmc 228 drivers on x and y and the 49 88 for the z. That's okay. That explains why the z's a little louder. That's okay though um Let's see. I'm doing good. I'm doing good brad walsh What are your thoughts on the kaiwood print ios android app? Have you used it? I have not used it yet So I can't give you a honest print honest thought because I haven't I haven't used it yet. I will um I just haven't I haven't done that yet Oh, let's see. Yeah hit that thumbs up um Brian and angus at the same time Go like a super secret maker stream society. Yes. See you later, brian. I didn't know you were leaving but Uh, have a good night. Hopefully you have fun recording. Hopefully not for the third time on the same video um And and you know just just move the clip just move It's good to see you brian Let's see Can't can't hate the 2208 is our grandfathers. Let's say hey Why not the 22 8s are great. Um the 49 88 on the z It's loud. I mean when I can actually show you real quick It's it's a little louder than the others but the whole printer as a whole is pretty pretty good as far as silence goes Let me show you here Oh, you know what I bet I have to home this thing Yeah here Oh, you can't really I'll I'll uh, I'll home it first And then I'll raise the z up and you can hear it. So it really sounds like a ender three probably I mean, that's a good way to say it. It's it's got the 49 88. I believe as well the original ones at least um Yeah, any other questions for the tycoon Tycoon max Kai was with us. So you can ask direct questions and they can help answer as well Uh-oh Let's see Prefer I prefer the printer that makes noise. Yes, you know, that that is a funny thing because you get so used to The quiet silent printers Then you go to another room Maybe you're working on something else and you're like, wait Is this still printing and you have to actually go watch it to see true Um, is there enough room on the side of the frame to side mount the spool holder? Um Maybe I mean that you can't really get to it here And you wouldn't want to do it in here because obviously the spool holder would sit in here Um, if you did it sideways this way, I don't know if I would You could probably find a way to do it. But um, I don't think I would on this one in my in in my Opinion just because of how the direct drive works straight down But that's just me. I mean, maybe you could find a way to like You might be able to find a way to do it. I don't know. That's a good question Came late. Sorry. What's the bed size? I believe it's through. What is it three three by two thirty If I remember right 300 300 by 230 or two I was right 300 300 by 230 Boom Um, no, it shouldn't be an issue during a big print. No, it's not not really it's only like homing that kind of stuff Close luke Um Kind of I have the lulz bot 747 right here And definitely different. Uh, obviously it's this isn't a taz, right? This isn't a taz, but it's definitely different. Um, yeah Maybe a reverse bowden and you probably could there you go Yeah, if you put it if you wanted to do like some sort of bowden Just for a guide you could probably side mount Not not a bad not a bad idea um Uh-oh my one of my cats or one of our cats is uh woke up the little man the little guy sleeping um, we have a 17 month old son and he was sleeping and uh, yeah One of our cats like clawed on the door and woke him up. Um, what are your thoughts on the ui responsive and well The bed size Is 305 by 310 printing sizes 300 300 by 230 there you go Uh, yeah so far. I've had no issues as far as um Responsiveness on this touchscreen at all it does really good Um Oh, you know what? It's still yelling at me because of the thermal runaway error. I have to reset it So good RC cnc. How you doing? But yeah, um As far as responsiveness and stuff the the touchscreen has been very good from what I hear There's a firmware upgrade that even makes it better. Uh, I believe Kevin earlier said that If I need to check out that kaiwu if you're with us, um If you could hook us up with the link to get the firmware that will be awesome Otherwise I can go search it out Yeah, so the beds the the glass plate is 305 by 310 Printing size 300 300 by 230 boom, thanks kaiwu And like I said, thanks for the couplers they went in uh pretty simple And I don't think the new ones you have to do this So I wouldn't worry about this unless they send you an extra set of couplers I wouldn't worry about that because they're already done um So there's that Yeah, so I think overall uh nice sturdy. I love the feet on the bottom so Maybe you have a workbench That warped or something maybe your table's not level you can actually screw down one of these screws and stop the wobble Now obviously you don't want to put a level on this Um, I mean, I guess you could you could put a level up here and level it to your table But that's still that's totally different than your x axis x axis if I could talk to your bed So tramming the bed or making your x axis level to your bed is totally different than making your whole frame level But if you really wanted to make the frame level you absolutely could with the included feet here They just screw out and raise and lower each corner And then like I said, uh I learned from luke to check both sides I grab I mean you could do it multiple ways. I just have this little Metal ruler here that has millimeters. I check this side over here Versus this side over here and make sure they're a millimeter or less off from each other if they're not Um hold one coupler over here while you twist the other one while it's engaged It's important that you kind of twist it while it's engaged You don't want to disengage your steppers first and then you can level that out and then you'll be golden All right Time to go big thanks to the live stream looking forward to monday with 3d printing nerd. Hey, me too. Thank you so much for swinging by Jay, I really appreciate it and again monday night 6 p.m. Central, right? It's actually on the hot makes channel But uh on hot makes we'll have joel telling the 3d printing nerd. It's gonna be a lot of fun We have we have a great time with joel Uh, I don't know if you saw his twitter, but he's actually out with neil patrick harris or he was Doing some filming stuff currently so that's a lot of fun Yeah Kevin jones feet are absolutely necessity special with fans mounted on the bottom It does definitely keeps everything up off, which is great um All right Well, yeah, I don't want to stay I mean I don't want to keep you all too long obviously, uh You know, we didn't have to build it during the stream I did that ahead of time because I was actually using it ahead of time a little bit But I wanted to come on and show it. Thank you so much to kaiwu for sending it to me. I really like it It's solid. It's sturdy It's got that linear rail on the x axis I do wish if if there was anything coming from me as a suggestion I don't think you were on earlier kaiwu, but I would suggest a little bit of the grease like a little jar So we could grease our rails. Um I know creality includes that in in their 200 b And it's super awesome to have that, uh Grease because these rails do get loud and you want to make sure they're they're sliding good um You know, so that that would be a suggestion. Maybe just include a little thing of grease Um and to find missing tools. Yes, you mean with the bed feet. That's funny Um later luke. Thank you for popping in man. It's been a long time. We got to catch up. We got to catch up um But yeah, I think uh Yeah If if all the contract creators got in an everyman for himself battle Royale barefisted battle, I think jim would win. I don't know about that I don't know about that. I'm a lover not a fighter I I'm a big guy, but you know I'm uh, I'm a lover not a fighter I probably if if that were to happen, right every man for himself We'd all get in there and then we'd end up friends in the end and and it would all be over with because most of us Most of us are all friends and talk and and have a good time and and yeah, so there's that that's funny though But yeah, I think uh, you know any other questions shoot them out there. I'm gonna see Um Hopefully the little man went back to bed Gotta love the water so whatever you're drinking out there stay hydrated Um, I'll probably go in and find a Guinness before bed. So there's that Michael casel. How are you? Yeah, I mean overall don't forget to check out things if you haven't already I posted the link earlier with the chicken arms Um for the heck of it. I'll do that. There you go Oh, not a single fight that can't be solved over pizza. Amen. I love pizza Uh, so check out chicken arms if you haven't already done that grab yourself some coax 3d filament I don't know if you have checked this out or not Um, in my opinion, this stuff is awesome. It prints really good It goes down like butter once you get it dialed in it does print hot So I print this usually at like 220 myself It is PLA I don't know if Shane's still with me Uh, or still with us tonight, but I'm not sure if uh, Shane what what you print at but I usually printed about 220 on this Um 60 on the bed and the stuff comes out. Absolutely gorgeous Uh, I mean it's really good consistent filament if you have any issues at all They're really really fast to help you out too um What's the price tag I believe if I remember right 459 Let me just double check. Uh, there is a link in the description for amazon. You can check out the amazon link there Um, it looks like you can get it from kawu for 549 It looks like amazon is there's a couple different prices out there on amazon um So, yeah Check out there. I know I put a link to amazon in the description below. So there's that what about the whole chicken. I love it So in summary not bad. I I do think Um, I like that it has the good power supply. It is the mean well in there. It looks like It's the lrs 350-24. So it's 350 watts by 24 volts um I wish I had my camera out here so I could actually bring you into This actually show you what it looked like. But yeah, I I apologize. I didn't grab that tonight and I Got out here and realized I didn't have it um So I believe they said 2208 on x and y and 4988 stepper on the z is what they said earlier with kawu um Yeah, overall pretty good. If you have any questions, let me know you can always put them in the comments of the chat When we're done here, but I think I'm gonna call it for the night. I really appreciate you guys jumping in That's kind of a last minute stream. Uh, I was like, hey, I'm off tomorrow. Why not? I'll stay up a little later tonight and get it going So, yeah, any questions at all? Those biceps were juicy. That's hilarious Uh, any questions at all feel free to comment below You can always shoot them over to me on social medias and and hopefully I see them Um, I I'm kind of bad at that right now, but I you know, I'll try to get on track and catch up um Other than that check it out. If if it was me Excuse me well Whoa, there's one of those. All right. So if this was me and I was looking at a printer um I think the kawu would be in the mix I think it would really depend on what you're doing with it If you're gonna move it a lot if you want a solid sturdy printer. That's not under three style It's not bad. Um And I think there's a lot of upgrade able upgrade ability Uh on this as well. You can definitely add some cool stuff to it. Um But I think, uh Yeah, if you're looking for a printer, definitely keep it in mind check out the link below and takes you to amazon You can check out the amazon page there Um, I appreciate you guys using affiliate links that helps me out helps the channel out And I really appreciate that but other than that. Thank you guys so much for being here I really appreciate it. Uh, it looks like I need to go Put the little guy, uh Oh, no, it looks like he fell asleep. Okay. Good Well, I'm gonna go get ready for bed and get some sleep before he wakes up at 5 30 in the morning But thank you guys so much for hanging out with me. I really appreciate it on this Wednesday night. Well, uh, that's weird to say Everybody have a great night a great day wherever you are in the world. Thank you so much again Everybody who donated tonight. Thank you. Thank you. Thank you. I really appreciate that Look forward to more streams coming up For sure sunday morning at 11 30. I'll have a members stream So the members stream will start at 11 30. It's going to be similar to this except for we'll just chat I'll actually throw the link out if anyone wants to join in and chat in person Otherwise you can feel free to chat on the comments or whatever you want But uh, it'll be a member stream on sunday at 11 30 and that'll be for all youtube members So if you're a youtube member, you're welcome to come hang out Um, we can talk about whatever you want. It's private. It's not going to be broadcasted Uh, so yeah, I mean, maybe we'll talk about barbeque chicken. Who knows? Uh chicken arms, right? Um, but yeah come hang out with us, uh then and If you're not a member consider joining I know you can uh, you can do that. There's two different levels and in this case I'm inviting both levels to that member only stream. So we'll see you guys soon. Thank you so much Have a great night everybody. Have a great day if you're on, uh, the other side of the world And uh, yeah, have a good one guys kaiwu tycoon max Definitely check it out. Definitely worth a look. Uh, as far as 3d printers go It's different and I like different. So bye everybody. Have a great night. Thank you for coming I really appreciate it. See you