 Hey everyone, Danielle here from TC Helicon, and today we're gonna talk about the Perform V. The Perform V brings perfect vocals to your fingertips with time-tested vocal effects, automatic mic gain setup, adaptive tone, anti-feedback and pitch correction for worry-free performing. On top of all of that, you have the ability to store and recall all of your favorite effects as well as beam in pre-made sounds from our Perform V app. Our preset library hosts hundreds of iconic sounds from your favorite singers, genres, and songs. Before we dig into the Perform V, make sure you've downloaded the Perform V app as well as our voice support app, which both can be found on our website. This will help you fully unlock the potential of your Perform V. So let's get started. First things first, mount your Perform V on your mic stand. For live performances, get your XLR send from the board. Plug your second XLR from your microphone into the back of your Perform V. Then, plug in your 12-volt power supply. Now you're all powered up and ready for your live performance. So at home or in rehearsals, plug in your XLR from your microphone into the back of the Perform V. Plug in your 12-volt power supply and your eighth-inch headphone into the front. Now you're ready to play. If you're looking to sing along to an instrumental or an MP3, simply take an aux cable and your audio device, plug back into the aux cable on the back of your Perform V and play away. If you're using the Switch 3 or Switch 6, it's a super simple setup. First though, power off your unit. Next, grab your TRS cable, plug it into the pedal input on the back of your Perform V and then into your Switch 3 or Switch 6. Then, power your unit back on. There'll be more on the super simple two-step mapping later on in the manual. To connect to your computer, take the USB mini cable that came in the box with your Perform V, plug it into the back of your unit and now you can connect to voice support or your favorite DAW. So now we're gonna talk about some settings. To control the brightness on your Perform V, simply click the set button one time, which will activate this green dial in the center of your unit. Use the dial to turn brightness up or back down. Hit set one more time to return to performance mode. If you're using a condenser mic, simply activate the 48 volts by holding the button down until it turns red. Now it's time to set our gain levels. To do this, simply hold down the set button. Once it's red, we're in gain mode and we're ready to set up. So sing as loud as you're going to during your performance. Ooh, hey, check, check, check, check. As long as the indicator is green, you're in the clear. If you prefer to manually set your gain, simply hold down the set button and let go once it turns red. The center dial now becomes your gain control. So same thing, sing as loud as you plan to sing during your performance. Ooh, now that our gain levels are all set, you're ready to rock with your Perform V. Wanna know more? Follow the link to the full Perform V video manual and comment your questions below. Also, head over to tchelecon.com for all of our written quick start guides and manuals.