 Hey guys shape every 1,000. We're gonna try to put these legs back on to this jewelry box. I Might need your help. So if you could hold this for me, I would appreciate it Okay, guys what we've got here is we've got this piece. All right And it's it goes just like that and this leg is supposed to go through here and Those screws are supposed to go through here and through there same way with on the other side now as you can see It's just that stupid cardboard stuff You know, I mean, that's all that is and it was just glued on at the bottom right there Well, that's really not gonna hold anything if these pieces here are holding these legs It's not gonna hold anything. So we're gonna try to do something a little different first of all I'm gonna put this on now. I Could probably find me a piece to make this piece out For that, but I'm not gonna worry about it because I'm gonna put the legs on a little differently As you'll see here in a minute. Now what I'm gonna do is I've got some of these matchsticks here And I've got a drill bit and I can't go too far if I go too far. I'll go clear through So what I want to do Is I'm gonna take I've got some holes or I've got a mark right here So I want to drill let's see if the matchstick will go in it Yes, it will. Okay, I'll put one here walk in on this one. Okay, great Anyway, now I've got down here on the bottom of this. I've got a couple marks already made. I Didn't measure anything. I'm just eyeballing it because you're not gonna see You're not gonna see any of this. Okay, so what I'm gonna do now Is I'm gonna put a couple of these two picks in here and we're gonna see if our holes line up Okay Yes, they do so I all I have to do is Clip them off a little bit and also have some glue. We're gonna glue this All right, so I'm gonna clip those off and I'm gonna make two more marks. So we're gonna put one here on here See if we can find our marks. There's one right there And we're gonna put one Right there. All right This is just gonna be for looks. It's no longer going to hold the legs I've got another other idea for the legs. It's not the right way for this But let me get our glue glue here. Let's get these matchsticks in here first I'm gonna clip these off because they're very very short All we just all we need is just something to just something to hold it steady. Whoops. Now we're going to glue I'm not real concerned about this being really really strong because like I said It's not It's no longer going to hold the legs. It's just gonna hold itself. That's it Okay, so let's see if we can get these holes lined up again. Oh like I said, that's all that's gonna do That's just gonna hold that just like that No problem. Oh now she can see these bigger dowels these bigger dowels We're gonna go up through here like this Now I'm gonna drill into there and there but I got to figure out how to get my hole So I want to show you how I'm gonna do that first thing I'm gonna do So I'm gonna drill my hole Up through here and my bits walking on me Nice, huh? That's gonna Go like that So what I'm gonna do now I'm gonna take some of this glue It's like that I'm gonna smear it around that hole. Okay, then I'm gonna put this in the position where it's gonna be And I'm just gonna set it down like that and that should give me a mark Where my hole is gonna be So my hole is gonna be right there and again, it doesn't have to be very deep So our hole didn't go straight there, but that's no biggie. Let's make it straight. All right Now I may have to cut this down some because that's gonna go That's gonna go in there like that. So make this a little bit That's gonna go like that Then this is gonna go down on top of just like that Okay, so let's go ahead and get this glued around the bottom as I put this on so This all cleaned off for you Great, huh? I'm not worried about what's kind of seeping out if you see any This is just black I'll just use a morpher and go around that now what I'm gonna do is I've got two screws I'm gonna put them in here. I'll be right back pretty much. Hold it. Don't drive I mean, I'll leave them in but it won't be necessary on the other side because I don't even have the bolts for the other side So right now There we go. That's gonna be fine. I'm gonna do the same thing to this other one We'll let it dry then we'll stand it up. See how it looks. All right guys. There she is Of course, you know, it's not gonna sit here in front of this I just wanted to use that as a backdrop kind of like, you know what I mean As you can see It's standing on its own and you can't even tell. I don't even know which side it was we fixed Anyway, oh This side over here. This is the side we fixed so Looks pretty good Now what needs is monkeys touch on cleaning up a little spot right there, but So it means she's solid good solid There you go guys. I know it's not the right way. I should have cut a piece of board and all that but I mean You know, that was the only thing holding them legs on now them legs are put in there with 38 inch Some 16th inch dowel rods, so they ain't going nowhere If anything these other two will come off first, I don't even know if she's gonna keep it. She may sell it I don't know needs a little touch up But there you go Well, these things are like a hundred bucks new man, you know now somebody Somebody can own this one for say it's all dirty Someone can own this one probably for around 30 bucks. I imagine we'll see she may want to keep this. That's a nice little Nice little item there. Like I said, it's standing on its own guys It's You know All right, so there we go. It's all done so tomorrow I'm thinking about hanging this door, so I don't know yet. We'll see I shouldn't have said anything because I'm not surprised Or with that but anyway So much for the surprise now, huh? So anyway guys, thanks for watching. Appreciate it Another one of my videos got up to four hundred and thirty four views or something like that Hundred and four. Hey guys, thanks for watching. Shea Bear the myth man legend. I'm gone for now. Bye. Bye guys. Take care