 Hey guys shape our 1,000 here today. I want to show you how To put this accordion style door Back up on this closet keeps wanting to fall off somebody's going to get hurt and There's one reason right there So stay tuned. Let's see if we can fix this for monkey. Okay guys. Okay guys. Here's one issue right here See this thing right here Get a different angle. This is supposed to be straight across here. It keeps bending down Okay, so When that happens these are adjustable Okay, when that happens it's letting The piece that goes in here it goes inside here. It's letting that pop out. You know Let them pop out like that so and when it does that Makes this loose And as you can see it split up through there. All right So what we're going to have to do is try to tighten this up Okay now You can try to just glue that in there, but I don't know how well that would work The right way is to get a dowel rod a wooden dowel rod Glue it in there and re-drill it now. I don't have a wooden dowel rod, but I've got this Little paintbrush that I have used so it's all real hard and brittle there now I didn't throw it away. I've got a couple of these and I didn't throw it away for this reason See that but see this does not quite fit. I have another one. That's a little bit too small So what what I'm going to do is I'm going to go ahead and drill this out a little bit more Okay, and I'm going to try to get some glue up into this crack You know, I'm going to try to spread it a little bit and get some glue up in this crack And I'll stick this up in there cut it off and Then re-drill it with the right size drill bit because see it should actually fit snug Like that see how snug that is right there Well now again It's just I don't trust it and then we'll work on the part that's down there on the floor That this goes into and I like I said, I don't know why it keeps bending, but I've got a quick fix for that. So All right, let me get you set up in the stand and we'll get started on this. Let's drill this out. I Don't I'm not quite need one size Bigger bit, but I'm gonna try to kind of Of course, if you have a right size drill bit it'd be much nicer. Okay, there we go. There we go. All right So let's try I'm gonna spread that open a little bit like that. I'm just using some Monkey glue there real glue. I'm gonna spread that open and Close cap when you see it squeeze out like that. You know, you've got enough in there Now let's glue this in there And it's gonna take take a bit of glue. This is the right way to do it. So Well kind of if you got the right drill bit, it's the right way to do it I want to make sure That hole is all filled up. Now you don't have to go in Super far because this only goes in so far this way Okay What you can do Is you can take one of your deals and measure it just like that, you know about how far to go in That's kind of what I did there. So I'm gonna make sure I got Plenty This wood glue in here cuz I don't want this happening again Now I'm gonna go around here and put some more and then what we'll do is we're gonna let this set up for a while And if you have the problem This is the bottom if you have a problem with the top go ahead and do the same thing to the top I won't hurt it, but the top I did check on this one and It's snug. So it's the top is good to go. All right Now this don't have to be perfect as it is directly on bottom. You'll never see it Okay, but if you want to sand it go right ahead as you can see someone didn't paint this But that's okay because you can't see it which I never know until the door came off So and this one won't be used because there's not a track on the bottom But they they're drilled like that in case you you know want to flip them or whatever now I couldn't just flip this one and use the good ones because It's one two panels one and a half panels up on top and one down on the bottom So it wouldn't match the other side. It would have worked, but I mean worst-case scenario. Yeah, you can do that but I figure Let's go ahead and do it this way Now I'm gonna let this glue dry up Okay, and I'll get back with you as soon as it's dry Stay nice and snug Now let's get ready to put it back up on the door Okay, now we've got a straighten this thing. Okay Now these were a little loose That screw and that screw was a little loose. I went ahead and tighten them now This has to kind of slide back and forth. That's when it closes up against each other slides back and It puts pressure on against the doors so they stay closed So we're gonna try to bend that up. There's a spring right here. You have to watch it spring And make sure it doesn't pop out on you. I'm just using this cigarette pack to keep from damaging the floor And I'm gonna pull this up It's like that Make sure it's straight Make sure that spring Is down in there or it should be should be down a little bit more than that. It shouldn't be up on that screw There we go. Now it should move back and forth. Okay. See that? All right now Yeah, okay Let's move this up a little bit Okay, what I've done So I've cut me a little piece of wood that kind of matches up to that And I come out a little bit because there's a hole right there That I'm gonna drill I'm gonna put a screw in it. I know this is not a wood screw but It's just just gonna keep this from sliding out all the times Now this is really hard wood. It's tiger wood. I think it may be cherry, but I was told it was tiger wood But it looks like cherry to me. So I'm gonna use This to screw it in so I don't split the wood Now there's that Let's get the door on. Okay. There it is Shuts up nice. This one's adjusted pretty good The other one's down just a smidgen So I may have to adjust that a little bit but This one on this side is working fine so Little bit adjustment on that one and I think we'll be good guys So it's kind of a half-hearted quick way to do it The right thing would be to buy new hardware if you can get the hardware Put it on there instead of putting that block of wood under there But it's not that noticeable So I mean the other side might maybe a little loose But I'm gonna check that out and see and just make sure but that's kind of how you do something like that. So Just a quick fix to go one in the closet. I got to do It's not quite the same problem. The problem is the L bracket That screws up to the door jam is actually pulled out so I don't know if they had the wrong screws in it, so I'm gonna put more screws in it and We'll go from there, but I'll show you what it's doing I'm gonna get a light on here for you. Okay, see it doesn't It doesn't want to close all the way And that's because the bottom down here So if I can zoom in on that Has pulled out see that so I don't know I don't know what's going on there So I'm not sure if that's gonna be an easy fix or if I'm gonna have to You know once I get them screws out of there you know reposition the holes or You know fill it in with wood putty and try something like that or just drill it out and put another dowel in it Like I did on the door side in there in the bedroom. So anyway guys, that's pretty much it So at least it's not gonna fall down anymore. I've seen it almost fall on her Because it had been down one time. I've been it back up and I thought okay a fluke thing There wasn't a fluke thing. It just kept mending down. It's gotten weak. So but it is working properly now I just want to make sure she stays safe. So She'll be safe now. It's good to go. There you go monkey. So That I'm gonna go ahead and sign off say she barely met the man a legend. I'm gone for now. Bye. Bye guys