Daikin VRV III and ERV systems instalation





Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Jun 22, 2012

Installation of Daikin VRV III integrated with ERV (energy recovery ventilation) ventilation system in NYC.
Daikin ERV designed to maintain good indoor air quality by providing sufficient levels of fresh outside air and recover waste heat from extracted air leaving the conditioned zone.

ERV Features

Provides energy saving heat recovery ventilation via a new heat exchanger with high temperature and enthalpy recovery efficiency

Superior performance such as high static pressure with a high efficiency fan and the capability for use in a wide range of climates (5 to 122°FDB and 80% RH or less)

Unique functions such as independent operation, interlock with other HVAC systems and automatic night purge to reduce cooling loads and increase energy savings

Interlocked simultaneous operation with VRV indoor units through a single controller

Auto mode switches the ventilation mode (total heat exchange mode to bypass mode) according to the operating status of air conditioner system

Pre-cooling/heating control function to delay the start of ventilation during air conditioner start-up for higher energy savings

Supply and exhaust fresh-up operation modes to control pressure within a space

Improves IAQ by removing harmful contaminates and particulate

Filter sign and display reset notifies when filter changes are required

Temperature recovery efficiency up to 74%

Enthalpy recovery efficiency TBD

ESP as high as 0.76" W.G.

Sound levels as low as 25.5 dB (A) for sound sensitive installation locations

Helps meet local ventilation and energy efficiency codes

Helps achieve LEED NC Indoor Environmental Quality Credit 2 -- Increased Ventilation

  • Category

  • License

    • Standard YouTube License


to add this to Watch Later

Add to

Loading playlists...