Loading...

How To Flash Samsung Galaxy Gio Using Odin 4.42

149,383 views

Loading...

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Aug 20, 2011

How to flash Samsung galaxy gio using odin 4.42 (Custom and official roms)
Download Firmware of your Choice
http://forum.xda-developers.com/showt...

Download ODIN 4.42 http://www.mediafire.com/?c1c0h0l6gcf...
NOTE: Always do a fectory reset before and after flashing to avoid glitches.
1. Extract and Run Samsung S5660 Galaxy Gio ODIN 4.42 Downloader on your Desktop.
2. Open ODIN and Click OPS button and select and load: Gio_v1.0.ops
If you want to flash single file(.tar) click on Single package and locate the single .tar file in single package option . skip to step 7
3. Click BOOT button and select and load: APBOOT_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
4. Click PDA button and select and load: CODE_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
5. Click PHONE button and select: MODEM_S5660xxxxx_CL928654_REV03.tar.md5
6. Click CSC button and select: GT-S5660-MULTI-CSC-Oxxxxx.tar.md5
7. Turn the Samsung Galaxy Gio into Download mode by pressing ( Volume Down + OK + Power ) together.
8. Connect Cable phone to pc Make sure that the program detect the phone.
9. Click Start button if all set and ready,and wait until the program will finished downloading files. A word PASS! will appear if the flashing successfully completes.
The phone will then reboot,you can check and confirm the newly downloaded firmware version by typing *#1234# and then do a full reset by typing this Code *2767*3855#

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...