 Alright, this video is all about connecting your Switch 3 or your Switch 6 to the Perform VK. What does the Switch 3 or Switch 6 you say? It's one of these guys. Three, six. What's the difference? Three switches. Six switches. Pretty easy. These go on the floor so that you can basically trigger any of the effects that you want on the Perform VK with your feet instead of your hands. So, these come with a TRS cable in the box. So it's very important that you use a TRS cable. If you lose the one that you have, no problem, you can go buy one. Just make sure that it's TRS. TRS stands for Tip Ring Sleeve and it has two lines on the shaft and not the standard one which is a TS cable that you'd use for your guitar. So just make sure. TRS cable. Very important. Okay? So, I've got one plugged in here already and for the Switch 3, the automatic setup is that this will be your preset 1, your preset 2, and your preset 3 on the Perform VK. For Switch 6, it's the same, preset 1, preset 2, preset 3. And then here we're going to have Harmony, Reverb, and Echo. So those are your automatically programmed buttons for the switches. And if you ever plug in the Switch while the VK is on, you have to power it down and power it back up again. So I'm going to unplug it, wait the 5 seconds, plug it back in. And it's powering back on and if I hit 1, it's preset 1. If I hit 2, it goes to preset 2 and if I switch 3, preset 3. So that's great, but what if I want it to maybe tap my tempo. So I can hold down the Switch so I want 1 to tap my tempo and then I'm going to hit the tap button and let them go at the same time. And there we go. So what I did there was sometimes I find it doesn't automatically do it, so I'll hit another Switch and then go back to the 1 and then it'll start working. So this is great. Now if I'm playing a song, like really well, I'm a really good piano player, I can use my foot to tap out the tempo. For some reason I got onto mandolin here, which is really fun, banjo. Okay, so that's assigning number 1. Say I want to make just like an echo shot. Again I hold down switch 2, hold down echo and then that one went right away. There we go. You can see it's triggering the echo. If I want to make it harmony, hold down switch 3, hold down the harmony. There we go, triggering harmony. The idea is that super simple and a really great tool, just know that those are sold separately from the Performer VK, but you can get them from the same place you got the VK and any of our online distributors. So yeah, hope that was helpful for you. If you liked the video, like it. If you have any questions, throw them in the comments and please subscribe to our YouTube channel. My name's Ellie.