 I tried to, I did something wrong because it's vertical instead of horizontal, but I'm not gonna fiddle with it because it's time for a live. And I'm missing with too many things at one time. I'm over it, time to live. So y'all, as soon as I get you on my this, will be able to see what you have to say. If I'm even live, I don't even know. If I did something wrong. No, there's people. What's up you guys? One second, let me figure out what's happening because I'm not seeing the live. But anyways, here it is. Here we are. Here I am. Here you are. What's up y'all? And can you hear me okay? I hope so. I hope I don't sound too much like toad. Oops, I'm not gonna do that yet. So today I'm going to resin this tumbler I had, resented it before, but it didn't look good. So I'm going to do it again. And I'm gonna use some of these new color passion glitters. I wish you guys could see the color flip clearly, but it goes from, let me turn the flash off, that'll probably help. So if you don't know, chameleon colors, chameleon colors change according to the light source. And so if you have a flash on that's direct, you'll never see a color change because it's always gonna have the same light source, whereas if you turn the flash off and different light can hit it from different directions, you can see the color change. So this one is the diva from color passion and it goes from like a lavendary pinky, purpley, periwinkle to a green. Are you gonna show me something? The vertical, there you go. That's the diva. So y'all pay attention because I'm gonna ask you which one I write, Kat, same. I'm gonna ask you which one you think I should do. This is mosaic and it looks like it's a lot of the different kinds of chameleon flake in one bag because it doesn't shift altogether like the diva. It goes from like, if you see it's like all of it from this light source is pinky, purple and all of it up here is like teally green and it shifts together. Whereas this mosaic, the colors shift but not altogether. So I feel like this is probably like the leftovers from a whole bunch of glitters, like it's a mod podge. Maybe that's why it's called mosaic. That would make sense. So that one and then also unicorn. Usually I would go straight to mermaid but I want y'all's opinion. This is just a blue, purple, green without Sue, Taylor, DG, Clara. Yeah, Jerry, they just updated the app on people's phones and I can't switch it to horizontal after I hit the live. So I can't change it at this point but I'll know better for next time. I'm sorry about that. I know if you're watching it on TV that it's not the most ideal thing but I'll fix it. Okay, so if you want me to do the unicorn one, put the number one in the chat. If you want me to do diva, put number two in the chat. If you want mosaic, put number three and if you want, I can go get mermaid and you guys can see it. Ooh, puppy cam telling it back. I'm running, you guys running. Mermaid, check. Oh, I also have oceanic. You're not supposed to chase me, you're supposed to stay on camera for all the people's ma'am. Okay, so I also have mermaid which is a purple aqua shift. All these you can find on my website by the way if you want to get some of your very own artisttill.com. So you could do this number four for mermaid and then I went ahead and grabbed oceanic which is a green, blue color flip and you can do five for that. So one was diva. Two was unicorn. Three was mosaic. Four was mermaid. And five was oceanic. So vote now or forever hold your peace. How did we go from heat wave to leg warmers? I've been cold since I've had a cold. So yeah, thank you Kathy. I am feeling a little bit better. Change to five. So I'm seeing mostly four or fives. So I think everybody chose four or five which is understandable. There's some of my favorites but all right you guys I need you to re-vote four and five. Mermaid is like a periwinkle lavender to aqua and oceanic is green to blue. Four and five and four and five. Almost all fives. Okay. I'm also doing a giveaway. Yes. I had someone send me a bunch of products. I'm gonna split it up into three bags and we're gonna do giveaway for those at the end of this video. If you guys want in on that giveaway, stay tuned Jeff if you can help me figure out what question I'm gonna ask. I need to get away three goody bags. One, two, three, four, five, six, seven, seven fives, one, two, three, four. Four fives and seven fives. Okay. So we're going with oceanic. Okay. So if you've never done a tumbler before I'm gonna ask questions at the end of the video. So if you want to help me come up with questions if you read. So before this video, I had already resumed this piece. You can tell there's chunks, scrapes, scraps, or scratches. Little chips though just needed to be redone. So I sanded it and painted it black because any chameleon anything looks better with a black background. I'm bringing you guys over here because I'm gonna use this spray. We always spray over a trash can if we're in the house because this stuff is super, super sticky. And if it lands on the floor, you're gonna be sticking to it too. So this is by 3M and it's super 77 multi-purpose adhesive. And it comes out kind of wild. So I always do a couple of test sprays. And it actually comes out like a straight line almost. You probably can't see that it's very vertical. And so I just turn it to the side and give my piece of good coating. I taped the rim because while it is said that resin can't hurt you when it's not, like after it's fully cured, it's food safe at that point. We don't take any risks over here. I don't wanna get sued. And so I always will advise on the safe side. And so therefore we tape the rim. Now my genius self is gonna figure out how to put this on here. Typically your, your this comes off of most of them, but I have mine bolted on. So I couldn't do that. Ta-da, nice slow turn. So I use the spray adhesive on this piece and you can mix the glitter into resin and use that as, you know, a layer, but personally I like this spray adhesive better because I don't have to waste that much resin and I can make the little particles lay flat. Whereas if I mix it into the resin, I'm gonna have an issue with some bits standing up, some bits, like I'm gonna have to end up standing a lot of it off. So to avoid that, I just do the spray adhesive. Yeah, like the photo mounts not gonna work as well. Industrial. Hope you guys heard all of what Jeff was saying, but let me know if he didn't, I will reiterate because I have my headphone in and I don't know. All right. You guys, this is gonna look so rad. So I'm going to kind of run my hand across the top and knock off any bits that are sticking upright or any loose bits, because if you have any that is super loose when you go to add your resin and you're kind of moving your resin around, I can actually dislodge, I think that's a word, and make your glitter stick upright. And so just make sure you knock off all of the excess. I'm gonna take this and save it for later because the waste knot we want not. She sent me a picture of the top and set up to you. I would imagine reds, yellows, sienna's, whites, but that's colors that are all, if you guys are gonna paint a crawfish, what colors would you use? A crawfish? Yeah, it's a crawfish crackin' table and that barrel is the base. Okay, so now that we have our this and it looks so good, so good in fact that I need to bring you down to show you. And with a coat of resin on it, it's gonna be extra amazing. Okay, so now that we have that, I'm going to mix up a little bit of resin and the type of resin that you wanna use to do tumblers is kind of specific. You don't wanna use a craft resin because it's not gonna be as durable. Today, I'm actually gonna be using the Illumilite bubs. Come here, come here. I'm gonna be using the Illumilite's amazing clear quick epoxy. It has all the durability of, let him be down there, it has all the durability of probably a bone. Yeah, so like I said a couple times, it has all the durability of the art coat but with a two hour cure time, which is great when you're trying to get pieces done really fast because it also has not only the heat resistance and durability, but it also has the UV resistance. So it's kind of amazing. And you only need about an ounce, not more than an ounce, especially if you're working in this quantity. Ooh, I've bled that out pretty good. It's like exactly perfect. Y'all, the little wins, you gotta count the little wins. Okay, I usually just use medicine cups when I'm working in small amounts. This is actually gonna be too much rather than that. Her bone thing, yeah, oh yeah. So like all resins, this resin needs to be fully incorporated. It's a one to one. So I'm just going to mix it up. When you're working in small amounts like this, you don't have to mix for a full three minutes, even though I would be okay with you just regarding what I just said, because I don't want you guys to come back at me later and say it. I mixed for what I thought was enough and it wasn't enough. So if you have not worked with resin for that long and you're not sure what a fully incorporated resin looks like, then just mix it for the three minutes and make sure you scrape the sides and the bottom of your cup and your stir stick so that you can make sure everything's fully incorporated. This is gonna be enough resin for like two tumblers. Whoops. And so you can find this glitter on my website at artisttilldeath.com. And if you wanna get your hands on some of this resin, the Illumilite Amazing Quick Coat, you can get it from Illumilite and use my code YALL13, YALL15, one of those. It'll be in the description box under this video. And it seems like I'll be good enough to finish my voiceovers for our Crime and Craft. So I can finish the voiceovers and get that video edited completely and have it posted by this coming Wednesday. I'm so sorry that it's been delayed so long, but it wouldn't have been very fun for everyone to sit there and listen to me snuffle for an hour. RK3 was out of stock with Amazing Quick Coat. You can also go to illumilite.com for the Amazing Quick Coat. I would also say only work in small amounts with this stuff unless you're experienced because it has only about a 15, 20 minute working time and it does not play. Art Coat says it has about an hour working time. I've worked it up to three hours. This is the Amazing Quick Coat. I'm still looking forward to Crime and Craft as well. I'm over the moon with how many people are interested in that series and I know it's gonna be fully amazing. I'm also trying to incorporate other creators in it as well. So yeah, okay. So after you have your, hold on. Let me find out where my, okay. So I'm letting my wheel run to where the tape when I pull it is gonna pull in the direction that it's not going. That's a way by the way to say it. So when I wanna pull the tape, I'm just gonna hold onto this and let the turn pull the tape for me. So I don't have to worry about stopping it to pull the tape because if it was going in the other direction. If you have a turner, if you stop it and start it back up, it usually reverses. And so if it was spinning this way and I tried to pull the tape off and I try to hold it, I'm going with the flow instead of against it and that's gonna just make things more difficult. So make sure that you have your tape in the opposite direction of how your wheel is spinning so you can easily pull your tape off. It's a little fun fact, pro tip. And some people will apply their resin with like a spatula or a stick. I am not opposed to either of those methods but I find that I do the best with just my hands. That way I can feel if some of the glitters popping up there's anything I need to correct. I can usually do this and I'm not getting a tool dirty. Time is money, you guys. Okay, when you do this, don't neglect the base of your cup. Some people leave it completely blank, which is fine but if you wanna do that, you should tape it off and make sure you come all the way up to the rim. You can even go over the rim because you have it taped and for this particular resin, I'm only going to let it sit with the tape on it for maybe 30 minutes before I pull the tape. The different working times for the different kinds of resin is gonna be different. So whatever your open time is, I guess after about a third of it is used up, then go ahead and pull your tape. You also don't want too thin of a coat of resin so because I have it mixed up and it's a very fast-setting epoxy, I'm going to just put it all on here but definitely don't waste your resin. Like, yeah, if you put too much resin on tumbler as it's spinning, it's just gonna kind of collect in this bottom area and drip off, especially after you start heating it because when you heat resin, you're thinning the resin. It is, but since I have it mixed up, I wanna just put it on there because the only thing, I mean, it's bad when you don't have enough resin on your piece because then you end up with divots. So since I have it mixed up and I don't have anything else to put it on and I don't have the time to prep anything else, I'm going to just put it all on here. I'm also running my finger down the lip of the piece just to ensure that it's rolled all the way over that rim. All right, so we have it fully coated. I don't think I have anything sticking up but this is the moment where you can do any kind of like fixing to that. So I'm gonna just stand like on the side of it and look at like the horizon of my piece and see if anything's poking out or if I have any raw spots. A lot of times it takes moving to a different angle. So the light catches a different way for you to see if you need to fix anything. Looks like we're good. So I'm gonna hit it with just a little bit of heat and a tip so you don't add too much heat is to see where I have my little tail of tape where I pulled up. I'm gonna wait till that comes around and then just heat it until I get back to the tape. That way I'm not questioning whether I hit that area yet and then inadvertently adding too much heat to the piece and then all my resin kind of melts off and don't forget to heat the bottom of it. So now that's going to level off and do awesome things. Right now it's kind of dimply as it's starting to self level that little bit folded up on me, but we got it. And so yeah, I'm gonna let this spin for, I need to hit that with some heat. So this is a two hour cure epoxy. See, I hit it with a little bit of heat and you can see that little area moving. So it's really important not to overheat your resin because when you heat it, you're thinning it and thin resin likes to run off of whatever it is that you want it to stay on. So little heat is better. Yeah, I agree. I'll do another one in white. I'm not gonna do it today because I don't wanna push it with my voice and not to be able to finish my criming craft voiceover. I'm gonna turn the flash off so that you can walk around it and show how it looks with different light sources if you want to. Fingers are the best for me. I see you Claire, I see you. Hi, Shannon Marie. Glitter's getting banned in Europe. I'm devastated, my heart needs glitter. So I hear that they're releasing a more eco-friendly glitter. I don't know how that is. I don't know where that is. I don't know who that is, but that's the word. Yeah, eco glitter. Plant-based glitter. I wonder if they're gonna have chameleon plant-based glitter, because chameleons move. They ban everything plastic here. Straws, now glitter. Oh, it's tough when it affects business. Okay, you guys. I'm going to finish putting out orders. If you're interested in this particular glitter, the name of it is Oceanic, and it is a green to blue color flip. If you wanna try out the other ones that I showed you, the names of them are Mermaid, which is a lavender. Actually, I'm gonna turn the flash off and show you. Cause of the same reasons I said earlier. So aqua to purple. Funfetti, I feel like I would have called this, but it is mosaic. Unicorn, which looks like just a party in a bag. Diva, which also looks fun. Very reminiscent of the mermaid. And the Oceanic. I hope you guys give all of these a try. I hope you make a tumbler. When I pull the tape, I will create a short, if you wanna see, sorry, how this ends up. Yeah, I hope to see you guys in Monday's live. Oh, giveaway questions. What, did you, no? Okay, bag number one, hold on. Hold on, hold on. Let me figure out how to do, yeah. All right, hold on people, hold on, hold on. Needed a pen, so I don't, I don't know. I'm gonna do, I think a couple questions out of the feed today. And then an OG question. Okay, I have my notepad. Yeah, it is the leftovers that mess with the environment. So, I can only go off of the first person I see in my feed. So, I hope that's you, but if it's not you, then I'm sorry, but be ready. Yeah, it does. What giveaway? So, I had a subscriber tell me that she's having to downsize her art materials. And so, she sent a lot of them to me. Many of them are unopened, many of them are lightly used. And some of them are very OG. If you've always wanted to try the base tint from Stone Coat, there's a brand new one in there. And so, okay, so I'm gonna give away some stuff. I'm gonna put three bags together. I'm just gonna split what's in there up into three bags, evenly and just send them out to three people. So, please don't stress about my bandages. It's because of the bug bites and I will mess with them if I don't cover them. So, question one, what color glitter did I use today? What was the name of it? I wanna have one for the people that are new and just came in. Julie Honaker, got you. Toothpaste tastes the swelling and itch away from bites. So, they don't really itch anymore, but I'm a girl and I'll mess with it whether it itches or not. So, I had to protect myself from myself. Okay, Julie got you, first question. Now, Julie, since you won one, don't take all of it from the other peoples. I'm gonna show you one of my pups and you tell me what their name is. This one. Well, I wanna reward the people that have been here for a while. Kathy Rath, got you. And the other one, I love that all of you guys know my baby's names. Don't worry, Kat, I'm gonna do another one from like this feed. I have to figure out how to word it. Actually, what color did I base paint this tumbler before I put the glitter on it? You suck at tests? Well, you won one. Well, congratulations, Kathy. I can tell you, Kathy Carr, got you. Ooh, I spelled your name with a K. All right, I got you guys. If you ordered from my fall sale because of my sickness, I haven't been able to wash my hair or send out those, but I got them all finished, edged up, flood-coated and they will start going out. I'll start packaging tomorrow and I'll have some of them sent tomorrow. Some of them will have to go out Monday. But I will be doing another giveaway on Monday's live feed. So make sure you're here at sixth central for the next giveaway. I still have more paints that weren't in this box. I have them in another box that I will be giving out on Monday at sixth central. So if you wanna be a part of that, I would love to send you guys some stuff. If you've ordered from, sorry, it's just a weird tickle that is not very productive. If you've ordered from me, then I have your address unless you have moved. I know Kathy, Kathy and Julie have all ordered from me. So send me a message. If you have a new address, it's the same address you ordered from me before, then I can just reference it. You don't have to do anything at all. Yeah, I got your addresses this then. Can we do something? Lag, maybe pick a number? Yeah, Kat, we can absolutely do pick a number. Absolutely. I'll have a random number generator and we'll do closest to the number for the giveaways for the next one. How about that? Wi-Fi routers are very important too. So thank you, Jerry. I will end up being better. What's up, Boo-Berry? That is such a great name. Answers given before even heard questions. Sorry. So thank you guys for coming in and watching the video today. I will be pulling the tape on this and I'll have it posted within an hour unless I forget, which could happen. And then I'll just have to heat it and remove the tape, which would also make great informational content for you guys. But hi, Carrie. Right, Kat, I think about the cereal every time. My pleasure, Taylor. If you guys have any requests for process videos or is there anything you guys need help figuring out, working out, if you have problems with resin, leave me a comment down in the description box, not in the live chat, because I may not see it, but leave me a comment down in the description box under this video and I'm happy to do a video addressing your guys' concerns or issues with epoxy. And I hope you have an awesome evening. I will be shipping these out in the morning because I'm gonna take some microphone and go to bed. But I hope you guys have an amazing evening, amazing weekend, and be kind to one another because you never know what someone's going through and I always remember we do the test, you don't have to. And I can't work my hands. I just got in five cases of just resin, so that will be a lot of my tomorrow. But if you haven't subscribed to my website, do so because I send out discount codes and restock emails. As essentially, that's all the things I email people for is restock announcements and when I have a big sale. And both will be going out tomorrow when I get all that into inventory. Can you do on on how to make paste? So Kat, the thing about paste is, I don't know, I haven't narrowed down a specific binder that's in paste. There are a lot of people that say just put a mica into part A and let me tell you what that does. That just puts a little bit more part A into your piece. That does not a paste make. It makes mica into a paste consistency, but it doesn't make it a paste in terms of the specific reactions that paste give in resin as opposed to just a mica. So you can do that if you just don't want dry mica, but just don't put too much part A because that'll throw your ratio off in your resin if you're not too careful. But yeah, I will figure out how to make paste. Eventually I have a lot of tests running. Unfortunately, it's largely proprietary from the main manufacturers. But yeah, is that your favorite resin? Jerry for doing tumblers, it is my favorite resin because it cures in two hours. So if I'm doing something that I want to do a lot of layers on, so sorry. I'm gonna do something that I wanna do a lot of layers on. Having a two hour cure resin is amazing because the only other resin that I would like to use for this because it has the durability and the heat resistance is the art coat, but that takes 24 hours to do between the layers, so that's not feasible. For example, when I did 72 tumblers for our wedding, that would have taken a year. So yeah, it just made gum and didn't do anything when you just mixed part A into, yeah. So many people say it and I get that question probably once a week if you can make your own paste by just putting part A into mica. You can make your own part A and mica mix is essentially my answer. But yeah, I'm sorry it's buffering. Wow, I am just fully broke out because of my cold. Anyways, I didn't know it was buffering, I'm so sorry. Hopefully it's no longer buffering. You're looking at my wedding tumbler now, TG. Oh, thank you. Bye, Sue, I'm so sorry about the buffering. My favorite Turner is actually a six unit Turner that I let my friend, Tressa, borrow so I can't show it to you. This little pink one was like $14 on Amazon when I got it. They didn't send me a Turner. The sixth Turner is my favorite. Essentially any Turner that will switch directions and doesn't make you bolt on the this. So on this one, it's got a little bolt so that I can't take this pole off. The ones that don't have this screw and bolt here and just have doesn't extra long insert pole for this or it has just a clamp, like my six cup Turner does. It's a lot easier, sorry, sorry, sorry. The, my six cup Turner doesn't have this. And so for example, when I was doing the spray adhesive and when I was painting it black, I could just take the whole wand off and do everything I needed to it. And so that makes it a lot easier. So I would recommend, I think I have them listed in my Amazon link down under this video, but essentially anything that I can reverse the direction and that I can take the wand off is my favorite cup Turner. Those are the two things that are, I feel like important. You got your electric resister today. I love that thing. Okay. I'm going to try to rest my voice so I can do the voiceover this weekend and I have to be amped up to do inventory tomorrow because five cases of just resin just came in. I'm so excited. I have been waiting for another shipment of just resin for a couple of minutes and it wasn't even supposed to get here till 12. I mean, 16. Anyways, I'm going to go blow my nose and I hope you guys have an awesome evening. I will post this video if you're interested, check out my shorts later and thank you, TG. I'm going to go get some rest for sure, but yeah, be kind to one another because you never know what something's going through and always remember, we do the test. So you don't have to. I want to see you guys in the next video. Yeah. So bye. So awkward that I have to get up and come all the way over here to end the feed. Boop.