 Hey YouTube, here's a... I like the idea of playing around with these Transformers power supplies but of course they're dangerous they're directly connected to the mains and you know you can you can hurt yourself or even kill yourself playing with the mains so I had this I thought to myself okay so if I plug in 240 volts and I've got 14 volts coming out at this end of this little transformer here little 240 volts 12 volt 20 VA transformer and then from the secondary of that connect that up to the secondary of this transformer which is just a well I think for some reason I think it's 5 watts but anyway so I connect that the output of this secondary into the secondary of this one and then the output of this is close to 200 volts I'll show you that so I just plug that into there put this into here so it's still feeding this circuit but we're going to get a tap in on the AC on here so I give it some power and I'm just using my connector block here just snap that down for power now with this with this circuit on here if I if I were to unplug this okay so the actual that's quite good it's showing that the circuit is taking up a bit of power there so without that circuit in line anyway we have more like 200 volts now if I just disconnect that even though this is like this and it makes it a lot safer I'm still not as confident as what I'd like to be while playing around with the mains if I just disconnect that there you should have the circuit now there we go 200 volts because that you know that there is not that's not taking anything but it's nice to see how quickly it drops and even when there's just a little tiny load on it so and so really that does give a lot safer environment I suppose I'm playing around with these circuits now we've got 168 69 volts there um yeah it was just a little of transform experiment just to see you know if that would have any problems a little temperature check nothing temperature check there that's a little warm it's not hot or anything like that and it's just you know it's just not as cold as that you know if I took this glass that's cold but it's not cold but I'll shut up talking to myself like you all right so there you go I just wanted to see what would happen if you did that um and it makes the you know directly tapping to the mains 200 200 volts a lot safer yeah that's what I've done is I'll just hook this uh little LED lamp to the circuit and see the camera moving so I know I'll put that down now what it won't do is it won't let us go on to white if I jump it on to white it switches off and when it goes through these colors that's what it first starts up with but I can switch it onto a color and leave it on if I try to put it onto any of the settings like fade as soon as it has to go and do it well it just switches itself off because there's obviously not enough power it puts it back into a reset mode but you can put a single color on you've got enough power to do that but not enough power to put whites on it just switches it straight off by trying to put whites on switches it straight off never try and do any of the uh you know apart from the ones that just changes the color anyway just trying to get that stand green yeah stand red stand different it looks actually green but it's a blue there we go switch it off that's all I've done with that remote cheers watching