 So That ain't even all of it. I've still got quite a bit to go yet Well, that's the only measure to pull back about a day So I managed to get a full side in and he's made to start with this new Little pillar thing that's going up. So as you just saw from a little load out then we've been getting all set up already so using these nice little bricks to essentially replace this So I think if I remember right, it's all coming down It's all going back up the same but these panels are going up in brick. Is that right? So obviously I think we're going to try in there make that bond look a bit better too, but that's really the plan today's plan is go try and get all this taken out and Get at least the sides in so then tomorrow we can just get them up There's going to be a skip coming today or tomorrow. It's been ordered today, isn't it? Yeah So all the crap would just go put to the side for now and then the skip will drop it off in the skip But there you go. Not really much to say getting rid of this putting with ease instead So catching a bit This is a bad this is an example I'm not to do a porch. This is supposed to have a corner piece in here Which is what we're gonna allow for when we build our brick work And don't know what angle they came up with but that's not 45 degree and that's not Very weird. So we've got a cut cut as same as they've done what we're going to try get it a lot neater than that No two than in because the house is getting rendered Up to here and then the porch is like a feature brick feature So I say the roof staying in we're just getting all this out of the way. We're gonna leave this in but Might as well just take it out for ease of us building this brickwork, you know stick it on time That's why we work this thing down But conservatory as well definitely not a conservatory then. Yeah This is a having done conservatories for 14 years. I know how it should be done for a start. It should be 45 degrees Which is obviously isn't Don't know what that angle is and this one's even sharper and it's just done this horrible horrible put on the on the corner and then just gobbled it up with loads of plastic trims and stuff and then on the insides again A load of is it I think that's bonding shitload of bonding and even more foam No, no insulation though. The cavity is not big enough for insulation that cavity much for what 30 mil so So like I said, this is coming down. This is gonna be stepped back 70 mil To allow for the corner piece and then same here. That's gonna be back step back 70 mil It's gonna be a small panel But it's gonna be right so Think the robbers are gonna have a look at this one When I give them a ring So yeah What's this side like on? Okay, if you don't take the whole wall down Don't think it's a bit more solid. Yeah looking at that. It looks the same solid bonding in foam This is what we're up against all the time so it's all all the frames out. It's all propped up so They've waterproof in there cavities are About 50 mil this side Don't it's just it's just bad So as I said, we're gonna have a quick break I'm gonna nip off and get the sand and the blocks From fairwoods. I know it's gonna start demolishing the walls pile it all over there ready for the skip So everything's coming down to below the pattern concrete so we can't see any red bricks and these are our bricks Like a handmade Don't look nice and then we're gonna do a recessed joint Yeah, I'm not a big fan of recessing, but they want to match the wall. They want to match the bricks, but we couldn't get these So when we've gone for something similar to the porch down the road and we're gonna recess it like that Not much just a tiny bit just enough to To accentuate the edges of the bricks because they're all different shapes. It looks just a little better than jointing So yeah, as I say, it's just gonna be like a feature porch and the whole house is getting rendered next week So I'll catch you have to break You have it. That's one side down. They didn't really take a lot to come down, but Well, I've got all that to get out to yet, but I just thought I'd show you the Damage report from back here. You've got two tire wires holding the whole thing up And well three if you count the one on this side, as you can see, this is not very gobbled up well at all So I think the first thing I'm gonna do when we get mortars get that gobbled up a bit It's all very rough-looking But yeah, so I've just got to get these ones out This course and the one under I think they said so I'll get the tighten out for that I think like because the customer said do it exactly how it was but with these newer bricks and do it properly Yeah, we're gonna just have to follow what was already here since we can't really Can't really do too much of that becoming an even bigger job then which Isn't what we're priced for customer. Just wants a replacement so I'll get the I'll get the other side out first and Then I'll come back and get all the rest of this out and oh, yeah, these this is it We're not touching this. This is staying in that's why I've not really touched that again. There you go Do that as well Pristine brick workers best Not even any screwtizing either so we're gonna do that as well this side now I'll get you set up and we'll get this knocked out Spectacular That's look at quite a bit to go yet. I'm just moving it all to this side onto the pallet for now just so It's a bit easy to get to I'm not like I'm not scratching up more of this compact and concrete floor so Hopefully I think the plan is probably tomorrow if it arrives the skip is gonna go that side, I think Not too sure but it's going somewhere on here Obviously we can fill it up then with everything. So I'm just gonna get all the rubbish piled this side for now So it's out of everybody's way still get cars through so got the van on and we'll get the skip on eventually So here we go. So once all this mess is cleaned up It'll be the Titan to get those last two courses out and then be ready for dad He's just gonna have to fail would you get some sand and cement? I think that's all but yeah, so I Realized how much I'm saying so now. I'm very sorry about that I've said that like quite a few times during that one little video Furthermore Catch you in a bit small victory of today's up with their damp course levels in these are These brick just do not like They're not the best to cooperate with these bricks. They suck all the water up straight away So make it really hard to set them and obviously Because we're working off someone else's work. It's never it never goes straightforward So we've had to do a lot of cutting back getting stuff resetting stuff all the time. So But damp course levels in so I'm gonna get a bit more damp cut and then does just getting the new Bond worked out because There's gonna be a was it 70 mil 70 mil step back. Yeah, 70 most step back for each corner posts. So that throws the bond again a little bit so does just getting it figured out and We're just gonna do and job and knock with this mortar and just try and get as much as we can done as quick as we can so That's the little update so far. We'll get you sit back up and Try and get something done here. Imagine the pull back about a day So I managed to get a full side in and he's made to start with this new little pillar thing that's going up. So There's how it works to brick So just a two brick pillow all the way up. It'll hopefully be the same on the other side, but we've also got set up on this side ready for tomorrow and Obviously Rob is just gathering up for the skip now. I'm just gonna do a bit of a tidy up and Get packed up So we can get back here tomorrow load up a skip and get a Get a little brick working block work knocked in so We will catch you tomorrow