 bear 1000 here. Do a little vlogging so I thought we would change this GFI out here. Plug it in, plug something into it. Most of the time you got to reset it. Over there there should be one in there too especially because it's closer to the sink. So I've got one here it's not a brand new one so hopefully it'll work. This is what 20 amp. I got this at flea market so or yard sale or whatever so it should work but let's give this a shot. The the cover's not you know going to match but that's okay. Let me go make sure the power is turned off. Okay guys I got this checked with my voltmeter. It's not reading really anything to also plug something in. I plugged the coffee pot in and turned it on and it didn't come on. So let's go ahead and take this out of here. I guess this can be kind of a talent too but you got to see me do it before on different things but if you haven't then that's good. Put the switch in here too sometime. When I put lights up above the sink there I think I'll run it off jump off this leg here. That's kind of that's kind of screwed in like literally and then we've got the ground. Go ahead and take this ground bar off. You can see these this one don't but these have holes. These have holes you can just boom stick them down in and it tells you whites over here and the hots over here which hot is the black one so so good like that. So we'll probably clip these off and and just jam them in there. The ground will do the same exact way as they did this. Other ones we'll just stuff in them holes. Stick it back in there. Maybe bumping the camera house but we'll just have to see how that goes if I'm feeling any better or not get any sicker. Clip these off straight so we can jam them down in them holes right there so don't have to be super long just long enough to lock ourselves in. While there's two holes in each one that yeah they won't boil it's because one's a release. You stick something in there and it's supposed to release it. It doesn't seem to be working right so I think you got tighten the screw. Yeah jump off of it here. I'm not an electrician it's a guy that knows how to do some things that does save you a little money. I mean you know pay somebody to do this but you know they're going to charge you double than what this thing costs plus the labor is going to be outrageous to come in and do a 10-minute job. Ground on the screen. The green screw is always your ground guys. Okay they make these kind of long so you can get them started and they'll kind of push their way up in there. Sorry guys you can use a power screwdriver for this. If you want to I just choose not to because I don't like stripping things out you know so this will be pretty easy to do to strip it out. You guys all live a place here aren't I? I'm in the front porch too. Let's and we come back in I turn the light on. We want to go back out again a little bit later and this in here and we'll check it out. Different circuit so okay you watch that and we'll see. This one may not be any good either because I just heard it. This may not be any good either. Let's reset it as I turn anything on. That's how you do it. I'm just gonna have to go buy a new one. I gave a guy three bucks for that thing. Well you know but yeah it's just so I'll be doing this again. I'm not even gonna bother putting this one back in because that crack and I'm not gonna put a regular one in because the water this counter does get wet. Okay the ball been there I believe so. Alright let me clean this up here. I repaired one item that was replacing the ball and I repair it because it didn't fix the issue but at least you know how to do that so all was not lost. Well I'm out three dollars stupid idiots. So if I was gonna sell something like that I would make sure it worked first. Alright let's see what else we can work on shall we? We got this water filter here. Yeah soon hopefully soon we're gonna be putting a new water tank in here. These aren't very hard. Just got to get inside here and hook your wires. It's 220 and you got your inlet and your outlet and your overflow there. But this right here is the water it's not a water softener. The water softener don't work. That's the thing for the water softener. This is just a filter but every so often I want you want a back flush you can clean it out. I haven't done it in a while and I can tell but here's where the water will come out and you may or may not notice a oration on it. I could run that through and I could set the timer and it would do it itself but since I'm home I used to have it that way but since I'm home all the time now because I like to let it run a full a full circuit takes couple hours but I'll show you what it looks like coming out of there. Might not be able to tell it on something white like the hole or something like that after a while you can tell it is hard water but the bathroom gets really rusty because it does have a it does have a hot water leak but so I'm gonna let this run a couple hours and then we'll go from there. I thought I'd be wanting to do this I'm gonna take this whole Folgers can here I'm gonna make a little birdhouse out of it this is a 24.2 ounce it's one pound point eight two ounces pound and a half coffee can thing here you can use smaller ones bigger ones whatever we use this thing to trace me a hole in this so I can get them a hole to go in then we're gonna paint it this is gonna be their perch because I can't I think I used all my wooden dowels that I have for the purchase so we're we're just gonna use this for the perch so let's go ahead and put that right see that's kind of like that's right in the center so it's gonna kind of eyeball it here so we can cut a hole out for some reason my pen don't want to write on that right on the table but it won't write on this so let me go get a marker okay I got my Sharpie here that should write on it hopefully kind of I'm just gonna eyeball this I can probably make the hole bigger problem with that is the squirrels around here if you make the holes much bigger you'll have a bunch of squirrels living in your birdhouse next one like this I make I'll just I'll use my hole saw but feel like digging it out just to do this we're using a knife take your time you know this is kind of screwed up but it'll be fine for a birdhouse it doesn't have to be code and I think I need to change my blade in this too anyway I've got this all washed out we'll put this right dead center of that perch is gonna be like that paint it yet I've got some gold paint I must not have brought it out just gonna paint it gold because that's all I've got other than primer and if I could have a different color for it but I've got I've got gold paint and I'll paint it gold I think I'm just gonna leave the perch black so I guess it doesn't it doesn't matter I'd like to use a wooden perch they just look so much better or now I probably should have drilled that out with my keyhole saw but I didn't so what I'm gonna do is I'm gonna go ahead and take this over here and I'm gonna spray this and we're gonna let it dry and then we'll put the handle back in it so the paint has dried there's a couple little runs in it that spray paint really really lays it on thick but we're gonna go ahead we're gonna glue this on here yeah see the paint where it got real thick it's not it's not clear dry but now to hang it we're gonna put a couple little holes back here and maybe glue something back here to hang it with and then see because you don't want to hang it from this because if it gets too heavy this may come off you know what we can do though hang on a second I got an idea what we're gonna do we're gonna screw this in here we're gonna glue this in she's in hot glue glue it on the other side too so it doesn't come out put a little bit down there on that on the inside of that that way that doesn't come out then we're just gonna glue the lid on let me think about a bird houses you never have to take the top off right so this will hold it less the squirrel gets in it make them off with a squirrel but I'm just gonna keep working that around there it's pretty much on you can't really feel it snap with all that paint and glue but okay now we're just gonna go around the edge here and I'm almost out of glue but I'm not out I got more glue sticks in there and it's hot if you get it on you so be careful set up a lady riding a bicycle he's growling you settle now I'm gonna let that set like that so the glue can run down and then once that dries we'll show you what we came up with okay guys so there's a bird house I had to move the hook I put a little glue there to cover the hole up but I had to move the hook forward because this is so heavy but you get you get the idea do it however you want it decorate it whatever you can part finish partition this off if you want it on the inside and have a four bird bird house yeah there's so there you go that's pretty cool well guys it's about five o'clock I'm gonna keep I won't go ahead I had to spray a little paint on here because I scratched some of it up some of it got on my fingers and then I'm gonna let it dry I'll see if she wants to hang it up somewhere later but thanks for thanks for joining me on my little vlog here on Friday beautiful day out so I'm outside doing this stuff enjoying the weather Bruno's down here with me he likes to hang out with me so again guys thanks for watching thanks for joining me and hopefully like I said tomorrow if I feel up to it we can maybe do a quick live stream over at the over at the tree house we'll just see how I feel feel a little better than I did this morning so that's good so anyway guys again thanks for watching Shae Bearer the myth the man legend thought I seen a bird I'm gone for now bye bye guys and take care