 Nice and neat, two thinning, I just leave me two with magnetic boat levels on the profile so keep an eye on it. That's our steel tight. Both ends, big ass steel that. And it is the next day because the weather got too bad yesterday. It kept being on and off really fine rain so everything was just getting soaked and then as we pack up get dry up again when we try again, get wet again. One of the frustrating days so we just, we packed up a bit early. Went to Hodgens to hire up one of these in case we use the stillsaw. Keep everybody happy but yeah so hopefully today should be a bit better. The weather is going to be raining up until next week so let's just hope that they're a bit wrong because we need to make some progress on this thing but that is what we got up to yesterday. We've got a few courses up so we're just going to carry on and get that finished. And just a little side note quick as well. Made a start trying to get this cat flap sorted but we accidentally dug out a bit too low because we forgot to consider these cats have to try and get through it and we went to damp course by mistake so we're just going to pick that up one more course. Made a start fixing it up but we were in out of water so we're going to get that pup back in and cut this accordingly. We won't be able to do that just yet though because that can wait. Probably until we've got a few more course of brick up so it's a bit stronger. For now we're going to get back on this side and just blast it up as tall as we can and rinse and repeat over there trying to get some block working today hopefully. Let's see. I don't want to jinx anything. There's only wood. I find some wood. What's the wood? There it is. So let's get a mix on and let's do something shall we? Looks like we know what we're doing. Just spinning. We're a bit organized this time. We've got loaded out and got a mix in before break so we're ready to get started. A bit of an update. We're about five courses up from where we started. I think six on the other side because we have to do a bit extra but anyway we're going to keep going at this until we can't reach any higher. I think we've got enough bricks we'll see. I think yeah that's ready for jointing that so I'll get the old joint out give that a tidy up and then wait for dad to finish his damn coffee. I'm waiting for you here dad and the invisible watch but yeah so let's keep making hay while the sun shines or whatever that scene is. Just another update here. We've got the tear wires in all the way across. I don't know if you can see them but I'll make sure that you can. All the way down and here's the pack of them as evidence so if you're in the middle of taping right now where's the tear wires you can delete that right now and I'll take you over to here as well and I'll also show you the screw ties are in too oh god but yeah it's all in it's all tied together so put your keyboards down sit back and enjoy just know that the tear wires are in here peace of mind let's get some bricklaying done shortly before dinner so it's all ready for um block work or chalice is going to jump on but you're going to get those fill those top joints and that's where we're reaching way above our heads I had a bit of a hobble going on this side and that's quite a reach but um nice neat two thing we've got a few uh pretty a few more to go there yet well we have got a few more to go there yet but not till we've got something to stand on a scaffold and where have you will be um I'll probably have a ladder this side to get these trestles that side to get that bit and the cavity so yeah he's Alex is getting him getting sorted on there getting the DPC down where have you and it's starting to get a bit tired it doesn't look it but the more wall you build the more stuff you've got out about the garden so that can all be brushed off now because that stack of bricks gone that's been there since day one on the brickwork I'm right I'm all set up here spot boards ready profiles ready we'll come back to the cat flap when this profile brackets out the way and then just a quick one on the profile I just leave me to a magnetic boat levels on the profile so keep an eye on it and when it starts pulling you just accordingly that's when you drop this thing I think it's called line stabilizer so when you when you get to about six or seven and then the profile starts to pull over which everybody does you just click that onto the wall and then screw it up to your brickwork and that's solid more solid than all the uh all the clamps and everything up here in the pieces of 4b1 and 3b2 and clamps and that's it everything self-contained on the blakes lot less stuff to carry around a lot less stuff to worry about a lot less stuff to lose and there you go Alex just in the shade now so it while he gets himself set up there I'm going to get cracking on this side get a corner block on that end and off we go get off for some dinner now I just threw those four on there yep through those on there got a mixing ready for after lunch Alex is cracking on with the block working there he's coming on nicely and then plan is to try and get the vessels up on that today I have to know the jointing just ready for spoon you down now and yes it's windy not nice is it being the puppet but uh unfortunately the GoPro died just as I was finishing off but that side's up to trestle height now I keep going to the lintel height not yet a few more for that but that side's ready for scaffold and dad has been very busy setting up his own little makeshift scaffold to get all this bit up but the reason because it's seven to damp yeah seven to damp well is here and I'll just there you go right up to uh about six foot that so yeah yeah they're a bloody nice match I can tell you that and they're really nice to set as well because you can probably tell they're just so square which like well rectangular which I know sounds weird but there's so many bricks are just yeah these they're closer to engineering brick as well with the way they are and the way they don't take water there you go there's like a ibstock tradesmen light ibstock tradesmen light bloody beautiful brick and as you can tell it definitely looks different to it this morning it looks like we've done something now and we've put a big dint in all of the bricks and blocks which is always nice to see them go so that's more or less all the blocks there isn't it yeah so practically all of them are here then yeah so make a good made a good dint in it today we're coming back tomorrow let's get the bucket back and get on yeah let's get ourselves home ready for tomorrow where we can just try and get this side up to a scaffold height and uh get the scaffold set up there and just knock a knock a bit out happy days it's a pretty big big gap isn't it so yeah so we end up babbling let's uh catch you tomorrow right and it's tomorrow hello friends been here friends here to greet me again but obviously today our plan is going to be to get the scaffold set up there we've got to make we brought the extra scaffold as well to get ready for these steels on monday and we are gonna get that side up to lindl height that's the priority there get bike get all that blockwork and all that done and then i think i'll probably jump on that side while dad jumps on this side so he'll do the blockwork here and the brickwork get that up and i'll get the the blockwork and the rest of the brickwork up and my friend's gonna eat my gloves looks a bit um but yeah so not really much else to say but let's get on to it still a quick update here this was buddy fiddly but is the opening we're gonna have for this cat flap so we've just we left out a gap here for the blocks and then we've cut out a gap in this block and once we get the everything figured out we'll go patch this bit up here just so we can try and get this higher than the skirting boards when they're going so that's that now i know it looks a bit all over the place but now that we've gone past that the bond can go back to normal now so we had to mess around with stuff around and do unideal things but that's the best way that that could have worked because obviously we had to have a proper thing for that to sit on the way that's worked out stowed is so we're gonna build this on it and we'll cut out a reciprocating yeah but like i said now that we're past it i can get back to the bonded and that corner so we'll get you set back up well you're getting on for about half 11 now oh my god 12 o'clock um well that was a shock of finding that out yeah alex is on that corner still yeah alex is on this corner now he's got over the awkward bit you can get cracking on that now we've got to try and get these up at least the fronts to little height i've just been on the um the stilly with the water suppression bought that yesterday because we were threatened with the fireman by the neighbors so this is what happens when you use water suppression the freaking mess and when you're trying to work on the water you work underneath just go with it as best you could and hose it down but yeah it's all done now all the cuts are out for the toothers so um i'm gonna get up there now knock all that out we'll get this side loaded out get stuck into this after dinner so um yeah well um i'll stick it on time that's a bit well i'm not right missed it again sorry about that but um it actually took longer to do the cuts than to tap them out so once you go in with the stilly from the side in the front you just tap them they fall out luckily no breakages took the cavity out as well a bit of a mess down there we'll sort that out so now we're all ready profile on that corner string line across to that corner because i went up a bit high with that side and get this leveled up to lintel height and the priority is brickwork up to lintel height and at least the block work on that front corner and then that lintel light again i mean alex might be able to reach out on that today which will be handy maybe i've got much to do this afternoon then we've got about 140 to put on this side now it's probably dinner time now are you ready for dinner because i'm not no right we'll work on a bit then yeah we had we had a fry up Saturday didn't we i had a sausage buddy alex had a bacon buddy and i got a nice latte so a bit full off to that so right it's tough to get this loaded because the trestles are up quite high but they're up quite high meaning we can reach the top of the pike so we don't have to move it so um yeah that that pauses me thinking i might just take those bricks off and drop the scaffold back down again because it's got to be moved on monday to set up for the steels okay so get back to you in a bit that's our steels height both ends big ass steal that but yeah it's got the it's got all day tomorrow to go off now which we need because the big old with with that and last three beds are big because i don't know what's going on with this house but they're all over the place so the last three have had to catch up up to there up to there we check with the laser level and the last we just went bonkers so it's all leveled up now and then all we've got left then is a bit of brickwork here tiny bit here and that pike there you have it show you the other side that cleverly just rate that corner back because if you're doing that we would still be here till seven o'clock so so yeah we wouldn't have enough water all the time so that's good is it so that's guys ready for finished height and now we can just simply get a line up and run them in obviously next time you see us it'll be the next video where we're getting the steels in so for now though thank you very much for watching this video if you liked it be sure to leave the thumbs up for us because that's greatly appreciated and if you're new to the channel be sure to hit subscribe and hit that bell so you're notified when we upload a video again we greatly appreciate you doing that uh this has been bricklaying with Steve and Alex and see when these steels are up