 What's up, everybody? Welcome to the edge of tech Hopefully you guys can hear me, okay? Wait till some people can let me know but yeah happy Tuesday night. It is about six o'clock central We are gonna First let me first let me know if you can hear me to hear me see me. I see me, but that doesn't mean you can see me Make sure that's good Perfect Good. Good. I like it It says Wade Peter boss For lateralists, I'm gonna kill that name. I apologize Robin Jim. How you guys doing? Perfect. So I am up against some storms that are coming in From the radar, I mean, it's already kind of raining but from the radar We might have storms here in the next hour hour and a half. So I'm gonna rock and roll we're gonna get this thing open and Probably printing. I don't know if we'll do a full print on the stream, but we'll get the first print going for sure. This is the new elgu Saturn for Ultra. Yeah, that's it Elgu Saturn for ultra. I It's it's let me see if there's any shipping stuff. There's not okay. There we go So it's right there Saturn for ultra This is the one that everybody's been throwing videos out because it officially released. I believe yesterday I couldn't get a stream Done yesterday and I kind of really wanted to stream this. I thought it would be more fun than Just throwing a video out there. I know there's a ton of good videos I think uncle Jesse also streamed during the launch event yesterday, which was awesome to see I'm in, Wisconsin But yeah, we're gonna rock and roll We're gonna get this thing unboxed if you have questions toss them in the chat. I have a full screen of chat here and We're gonna rock and roll. I I don't know how attendance is gonna be tonight being a six o'clock on a Tuesday but We're gonna make it happen either way. This is gonna be a lot of fun Let me know in the chat. Have you guys seen Anything on this on this printer? Have you heard anything? Are you excited? Not excited like just just let me know I'm curious to see what you guys are saying I've watched a couple of videos just so you know full disclosure Elgu did send this to me They didn't require anything they just said hey if you want to make a video we're launching Would have been yesterday. So only 3 p.m. Here in Alaska. Whoa Yes, I would still be at work if it was 3 p.m. Not gonna lie but they sent it to me and I Thought I would check it out again. They don't they didn't ask or require anything I'm gonna pop this bad boy open and we're gonna take a look Top down Maybe if I can holy moly. I think I'm I might have to get a Different lens. All right, so we see right away in the top. We have kind of some car some cardboard or Framing I guess you could call it which is great. So we're gonna get that off Also, if you're in the chat and you're going to the Rocky Mountain rep rep festival, let me know I will be there this weekend It's in Loveland, Colorado. Oh I know where this is. I know what that is. We'll put that right over here I think that's the thing that everybody keeps missing in their videos Um, it looks like power for us Yeah, Loveland, Colorado this weekend the Rocky Mountain rep rep festivals going on It is free if you're in the area or you're gonna be in the area. It is free to attend Look at that little book Hopefully everything's going good there and it looks like we have the printer Just kind of chilling right here. So I might turn this up and Slide it out. This is the bottom. This is the top here. So you can kind of see how the box is packed Like good packing so far, I don't know if I can slide this one up. Maybe I'll just slide it out Let's let's attempt that We're gonna attempt this right here We're gonna slide it out. Yeah Come on now Not off the desk right like we don't need an Uncle Jesse moment With a with a door or a printer or anything really It's kind of heavy heavier than I thought it was actually So I don't see anything else in the box Just double check in nope. So I'm gonna toss it under we are going to slide it off of that I'm gonna toss this back in the box And look at that in like two minutes you're unboxed It's pretty fast Yeah, again, let me know if you guys have questions As always I'm drinking my bubbly Water. Let me go in the chat, too. Why are you guys drinking? I'm curious. Oh Yeah, oh Yeah, a little water. All right, so there's like a piece of tape That kind of surrounds it here. I believe I can just I don't even know if I have to cut that But I'll cut it carefully Now you don't really have to cut that. That's just there good, okay So diet Pepsi. All right. All right My mom is a really big Diet Coke drinker So there's that Not only diet Coke. She likes the caffeine free diet Coke So I like grew up on that So Really, it's just wrapped up real good here. You saw it was packaged very well I want to try to get This thing unboxed and and plugged in as fast as we can so we can get a print going Hopefully All right, so yeah, right away. I noticed that we do have an acrylic top. It looks like it It doesn't look like it does Flip open kind of opens up. We'll see that in a second around the side On this side, ooh Blackcherry sparkling ice water sparkling ice is the brand. I've seen that I need to try that See do I have a camera hang on? Sorry about that So on this side here, we should see maybe we should have a camera maybe oh My cable came out. No wonder we don't have a camera. There we go So you should see right here. We have a Wi-Fi antenna USB an on-off switch and the power and that's going to be on the right side of the machine so This is the front of the machine. This is the right side. So that's the right rear of the machine So that's there in the back of the machine. I noticed all the information from Elgu and it looks like a port that you could hook up for Exhaust if you wanted to exhaust this thing Just ordered for ultra today can't wait for this to be Two to three months when they start shipping nice. I'm gonna give me two seconds here. I'm gonna shut this off over here My dehumidifier just kicked on and I have no idea if you guys could hear it or not, but it was loud All right, so That is that side. I don't think there's anything on the other side. Nope. Just some ventilation probably for the electronics That's awesome Shane Elgu this is actually Not painter and it's right on there nice and we have a screen here It is a touch screen and for you guys for you guys that are here right now here you go That was for you that was for you So yeah, that's that we're gonna pop this bad boy open Nice So pop this open so you guys can see It flips up like that So just a heads up Something I noticed immediately right away. I really like that it flips up because I don't have to take it off I Just have to remember wherever I put this I'm gonna need this much clearance You know for this thing to flip up and the back adds that much so I can actually give you an idea of size here With it up It is roughly oh I'd say Let's be safe at 78 millimeters almost 31 inches up just so you know and Like front to back Let's call it Let's see here. I'd say let's be safe it About 58 millimeters 23 inches right around there and Then as far as how wide it is we're looking at 33 millimeters wide or What is that almost 13 inches so there you go you have a Kind of an idea of how big this thing is and man I right before this I just got my haircut and You know when you get your haircut and it's not Styled the way you usually do it. It's kind of just done. That's where I'm at right now So it's actually like really weird to me But All right inside I Have a piece of white foam don't think this is needed for anything hopefully I Have another piece of white foam Tossing that in this box here. I have LPJ models, thank you. Thank you very much. Oh, this actually does have a box in it We'll check out the boxes in a second. I Think that's a full spool of filament. I'm just I'm just joking. I'm just Bad joke bad joke. Oh, yeah, it looks nice definitely beats my Saturn 8k Even though that's still going strong. You know what? Here's the thing The best printer is the one you have and you're using right? So if you're using your Saturn 8k Awesome, like if it's working it's working for you and you already have it. That's awesome. That's all that matters really So it looks like we have our build plate in this piece here it is like that and It's it's pretty light It's the top is like a plastic which is nice It is self-leveling this this printer levels itself So I'm curious about that, but it looks like it has a bunch of like stand-offs I Can show you better here. Of course. I can't show you better here because I just turned that camera off Sorry about that. All right, here we go. So you can see in here. There's a whole bunch of like stand-offs to keep this raised here There's a pretty cool pattern on The build surface this says please press firmly on the build plate when tightening the screws Remove the protective film before printing. Okay So here you go just for you guys one more. Oh Yeah And we get to see that really cool design there on the build but it doesn't I don't feel it. It's very smooth Kind of satiny. I don't know. It's interesting. I like it. I'm gonna set it right here for now Jesse what's up I'm gonna hook up with Jesse soon and get him and his family a printer Which will be awesome all right What else do we got another piece of this and Yeah, let's see LPJ models you already have one of these, you know, it's you have you used it? Have you been playing with it? That'd be cool To know all right, there's foam right in the front there. We don't want to forget that foam That would have been crazy Yeah, so so right away I see the vat is in here and That's just two screws Have an idea Give me one second All right, I'm gonna use this foam Right there. So I take my vat off. I'll set it on that foam carefully Don't forget that So they are not captured screws So I'll take those out like that Mars for ultra bed has same pattern awesome Thank you, Jesse and okay, so we have another peel right here Come on for the peels today So here's one on the bottom of the bed. You want to make sure you get this off? Boom so I got that one off for you and We have another one Right in here Boom so this is the interior of the machine right away you can see your screen it looks like your your The platform that actually Folds down it pulls away from the vat, which is pretty cool. Your camera is back in here It does have a cover on it so you can put a cover on it It's a dust protector splash protector or a cover if you just don't want to use it Which is pretty cool. You can see where that vent hole right here is if you want to use that Yeah, we'll talk about the spouts in the vat in one second we have one more peel down here Ready for this and We officially peeled the vat. I'm sorry the screen and Yeah, so we were talking about the poor spouts here Someone mentioned so there's a spout here and a spout here That will make this much easier to pour out your resin. Well, that's the idea We'll find out when it actually has to happen But it should make it much easier to pour your resin out and this thing does hold quite a bit of resin so That is a really cool Really cool design, so I'm gonna set this back in So you guys see? We're going to set it back in like this It does kind of sit in there nicely and then we're going to take and screw in these You know what I'm gonna do both of them there tight Tight alright, so we are tight. We're peeled. We got everything that way pretty solid There is a warning here the resin level cannot exceed the max line Otherwise it may leak and damage the printer. Yeah, I can imagine with so so how this works I've been watching some videos, and I know there's other resin printers out there that do this, but the vat actually pretty much stays Connected down here, but it the build plate stays in a solid position And the vat actually peels away Every layer every time it needs to and then it raises and then the battle peel away Then it raises and instead of the vat going up I'm sorry instead of the build plate going up dropping down into your resin waiting and then peeling itself back up And then going back down this one actually peels it away. I think don't quote me on this I think that's how the Prusa one works too. I know some of the other ones work like that I've never played with one so this will be my first But Yeah Similar ACF like the Saturn 3 or not. I'm not sure I don't I didn't I don't think I have a Saturn 3 to be honest so I'm gonna show you another cool thing here This right here is where your build plate clips on and you it just locks on like that So you can actually do it here with one hand if it's not dirty right slide it on like that and We're just gonna take and lock it down and that is secure. It's on there. I I really like that I Actually like that more than I thought Just didn't like initial reactions So yeah, pretty cool, I should probably check out the small instruction manual Let's see. Oh perfect. Just making sure Miss something there we go. All right Now I got a little instruction manual. I heard it's not big doesn't go through a ton It does tell you what we have included which is cool. So we're gonna talk about that. So Let's go through. I'm gonna slide this over. Let's go through their boxes real quick And see what came in our boxes. Let me see see if this works Yeah, it's a little better. Okay, so the first thing we have is our power brick There we go. This is a 24 volt power brick We're gonna set that right there and I think This is the other part of the power brick here. It says power to line on it And it is so that'll go like that We have we have some gloves Thank you a Couple allen wrenches and some spare screws if you can see that in there Allen wrenches and spare screws some Filtering funnels, which is always good when you have to put your resin back in the bottles a couple of masks a Plastic scraper a Metal scraper that I'm assuming. Yeah, it's pretty sharp. It's actually pretty sharp I'm assuming they want you to make sure to get the stuff off of the build plate carefully and it does have a really nice angle on that a Wi-Fi antenna and our USB drive there So that's in that box So that's good Next How you guys doing you doing good hanging in there with me This is the box that I think a lot of people missed this Should Yep, it is this should be our drip tray This is pretty cool. It's actually From the videos I saw I thought this was gonna be like injection molded plastic or something it is not it's more like I Mean it might be injection molded, but it's very thin Um Interesting I would love I bet we could 3d print these I would love to see these on more Printers we're gonna show you what this does in a second, but This kind of feels like a food tray like a plastic food tray, which I mean, maybe it's supposed to be Maybe it's supposed to be disposable or something I'm not sure But it's definitely very the very lightweight. You can kind of flex it kind of feels like a plastic food tray So that was in this box. So a tripod From tripod's garage thought he had missed the drip tray and I don't think he saw it in the box So we were talking about that so So yeah, he he missed this we were talking about that so I wanted to make sure I found that I think a couple other people out there that did videos missed it as well So go back look in your box if you missed this and find the box That's like this big. It's pretty thin kind of tall, you know and find your build your drip tray You're right, you know what vacuum formed is probably right Not it's not injection molded vacuum formed is probably You know you probably hit the nail on the head with that one, but it's pretty cool It it how it works is it just clips on There you go So then when you take your When you take your resin out, I mean your build plate off Instead of dripping all over the printer and all over the front of the printer and that kind of stuff It'll actually just drip right down into this tray You can wash it out and call it a day. So if I take this off You see it covers the front it covers the whole front of your printer that you know the front of the vat It's a really cool idea. I actually I actually really like this. It just kind of clips on very cool very cool idea You wham-bam flex plate would be probably awesome on this for sure Peter's probably watching. Yes We love your wham-bam. So actually I have a slap mat right over here Mike Jones if you're walking down the street and saw a chocolate cake in a Tupperware container On a mailbox not in it on it, right? Would you eat it? Oh? Here's a question. Is the cake still cold or is it warm? Hmm. How long has it been there? That's what I'm trying to get at. All right. I Think we got everything unboxed. I think we can plug this bad boy in Yeah, I mean it doesn't really Doesn't really say anything else there's no And there's no like step one unbox it Or anything like that it goes straight from the tech specs to tech to test printing and You know some of the other stuff not interesting. So we're gonna pull that off Warm and gooey I Don't know I prefer cake more like on the colder side But then again you can probably look at me and tell and and and tell that I don't pass up much cake Let's do a couple things real quick here I'm just moving stuff. I'm gonna put the printer on this side today Because I want to but also we need to whoo we need to take our Wi-Fi antenna it goes right in here. It just screws on Super easy Hey, hey the gaming summer ham. Oh Yeah, free cake. Yeah, yeah, yeah, no So if the FEP gets a leak will resin just pour down to the internals and that is a that is a great question very good question The Mar DLP with a proper glass layer much tougher glass layer recovering the LCD screen interesting So there's that I am going to pop our SD card in right away to like that and I'll plug it into in a second here. I just want to It plugs in on this side. So I want to get it closer to Hmm. I lied Here I go moving stuff around I am gonna go on the other side because I have a Wi-Fi switch plug over here And if I get this bad boy started and I take off I can always shut it off later But it's over on this side. I just want to make sure you guys can see it. There we go Grab this we're gonna plug this thing in Maybe maybe maybe maybe So I'm talking in BS and what are we at 30 minutes or something? Think about 30 minutes, which is great if you were doing this at home It would be much faster. You're probably unboxed and doing this part in like 10 minutes or less I Just saw that okay, so I think oh we got a screen. We got a screen. It was already on Trying to get you guys a shot of that but Let's see what happens There we go So it's going through a series of checks right now. It looks like sorry about the reflection I was not ready for Wow, that's a reflective screen I was not ready for that I Didn't realize the printer was already flipped on when I plugged it in there we go nice cold icing cake is great. Yes Mars for DLP typo nice So it's just going through a bunch of self testing right away, which is awesome and Then We have a menu. It's a touch screen. It looks like I can touch it. Oh, I can set it up on Wi-Fi. I can do apps and language that kind of thing It looks like printer mode. You can do high speed or low speed printing Which is sweet? You can change languages With flags, which is kind of sweet There's settings a device info there we go so we can kind of see a little bit of The I mean I'm going to turn this more so I can get to it We can kind of see system firmware that kind of thing right on there a our camera firmware Network address etc. So I'm going to go back to here And I'm going to slide that camera back over An elegant printer that they are good at making I hope so So I'm going to go back and pop my Wi-Fi in here um Maybe and I'll tell you how Okay, nice so far good on the touch screen Maybe I said that and then oh I missed a button Who else going to Rocky Mountain rep rap festival anybody in here? We're gonna see anybody there. Okay almost there. Let's see what happens People's champ boom What's up, man? Sam how you doing? It's late by you. It is late. All right. Do we connect? What are we doing here? I think we're connected We're gonna go back here Wi-Fi detection There is a new version of the firmware It wants us to Upgrade so I'm gonna show you what that screen looks like just so you see it We get you down there. There you go new maybe new version detected That's such a bright. There we go There you go kind of kind of see it there Boom we're gonna do it So there you go AI camera update and we're rocking and rolling Dan Adams is going awesome Are you bringing the gumbo? Man that would be cool I between I'm between two minds between this one and their DLP version of DLP is much smaller, but last 20,000 hour hours This one gets about 2,000 hours, and it's bigger I'm guessing this one's much faster as well something to think about Because DLP is usually slower in my experience 12 30 the night is young problems. I am not that's funny Jake from State Farm. What's up, Dre? What's up? Hope it all is well in the family. Thank you I will at Murph. Okay, we'll do gumbo at Murph. That sounds good cool 3d icons. Yeah, very cool So the screen is good the touchscreen so far touches nice It's a touchscreen and it touches nice We're just rocking we're doing an a system update quick. We're going to I haven't touched anything There's no leveling on this itself leveling There's there's nothing I need to know except for We're gonna start a print. I mean like this this instruction manual Has an introduction while this firmware is going it has an introduction page With the buttons it has a printer introduction page over here with with inside of there We have the z-axis to handle the build plate the screen the screw knob the camera the resin tank the touchscreen You know that kind of thing anti-muby cover It will do Let's see build volume is 218 88 by 122 88 by 220 high just so you know Test printing it does show you how to Right here. It shows you how to clip the front or the front the build plate on which is great If you do 10 benches at once does it take any longer? No, it doesn't not on these on I'm sorry on DLP at wood Because it has to laser all of the things on these Screen cures each layer and no matter what you have on the build plate the length of the time is only as As long as the tallest model you have loaded that makes sense So if everything's the same height everything's one time if it's three hours It's three hours If you have something that's higher on the build plate, you know, it'll be as long as that the tallest thing is Software intro Installation so there we're gonna install cheetah box. I believe it's a new version 2.0 Haven't done that yet. Maybe we'll do that while we get the printer going They have a network manager center So you can actually connect to it and see the camera you can do time lapses and all the cool things James, how you doing? Hey, everybody? I'm new awesome Can you see my eyes? No, I can't But I can see your comment Let's see how much is a screen I don't know that's a great question. I don't know that they've released that yet That's a really good question now report the machine reboot the machine to Ensure perimeter Updates, okay, so it doesn't do an automatic reboot. It's waiting for me So we'll do that now Okay machine rebooting You know, I see you again. I know you do. I know you do Boom There we go Maybe there we go. Oh you Saturn for ultra. So this is the LGU Saturn for ultra There is a link in the description My link. I don't believe is an affiliate link by the way I should get one of those though, huh? The mechanical sensors being calibrated there we go. So it's calibrating. It's going through all the checks again It's calibrating the mechanical sensor. Well, you see the bed the bat moving. That's pretty awesome. Oh It stopped of course, but it was cool to see it move There we go. We have Our screen back if I go to device info it looks like it's updated You can change the name it looks like in there by the way you can go here and change the Printer name it says 3d printer right now. I don't know if you can see that Cool so I Say we go straight for it. Maybe we should test that should we test the LCD? Think we already did device self-tech. Oh, we could what's that do? Is it am I crazy? Oh, I got to go to settings. I'm sorry so Version upgrade. What's the tools? device the self-test oh We already did that we already did that. I Thought it was gonna be something else something else cool. Oh I don't know. I don't know what my favorite resin and color is to be a hundred percent honest You know, I don't do enough resin printing to to have one I think I think that's my thing See that It's like There's no vat heater, but there is one available so there is a Vat heater that's coming. I believe it's on the accessory page right now Let's see I'm getting a 3d printer. I'm so excited awesome. What are you getting? What kind of a 3d printer are you getting? As soon as it's done with this device test, which I think it is now Here we go I thought maybe we could do I thought maybe it would do like an Exposure good text. Oh, there you go Let's see now we can tell if the screen's working and it is You can kind of see it all it's hard to see out through this camera, but there you go That means our screen is working perfect I'm gonna stop that because we really don't need it Which is awesome 4k monogu elegant replacement screens on Ali express for 50 bucks. That's the 4k one, right? so Is this recommended for printing jewelry pieces for casting? I think it could definitely do that We'll see why not I'm gonna I'm not sure if I'm gonna be able to stay the whole print because I have we have storms pending here I think Shane, I think you're a little bit north. I'm not are you are you guys seeing storms tonight? I'm not sure if you guys are seeing storms, but we are So here's what I'm gonna do I'm gonna give you a sweet view like this We're gonna get some resin in here and we're gonna get the we're gonna get a What's it called we're gonna get something going here so Let's see yeah 4k current so I just so you guys know I believe this is if I'm if I'm not mistaken This is 12k I know I Think it's in here. I Think there's a spec thing here X Y resolution Nope, nope layer thickness. I want to say our the screen is 12k on this one Fire if I remember right Time-lapse setup. I will definitely make sure that's on All right, here we go. So what I got I reached out to talk to uncle Jesse before before this and He told me to pick up a couple different ones, but this is the psorias tech What is this professional UV this is the fast you can see it right here. It's fast I got two kilograms or two thousand grams and it's 12k. It's what it say on there But it's the fast resin and it's it's supposed to be thinner So I did shake it. I shook it good before the stream. I'm gonna shake it a little bit No are now it does have time-lapse. It does have a camera. Yes Let's see let's see if we can get a sweet shot of Of me hopefully not making a mess No messes today, please. I Have my paper towel I'm not wearing gloves to dump this in but I always wear gloves for everything else As far as resin goes here We'll see what the I'm not sure what the screen is gonna be but we're gonna find out when they I imagine they'll You know, they'll release the prices and stuff soon. Hopefully Hmm, maybe I should put gloves on I want to put a glove on because It's making me pull like a Stopper out and I do not want to get it on myself Some people don't have any issues I'm right here. Some people don't have any issues With resin some people do I am one of those people that if resin splashes on me too much. I It's not my it's not my favorite It Kind of makes like makes my skin irritated that kind of thing then I need like You know, I got to grab some IPA and that kind of thing. So I did I don't know if you saw that I Did splash a little pulling that out. I'm going to clean that up right away I might have to get a new thing of IPA here. I have 99% IPA and I just got a couple drips on the desk nothing big Just be careful when you pull those stoppers I don't want that on the cameras and stuff, but here we go. Nothing nothing big. So I got a couple of drops I don't know if you can see there's just a couple of drops on that paper towel that kind of got out over this way Perfect here we go. Let's fill this bad boy up. What do you think? I Don't know how much it can hold but I we can find that out for sure All right, here we go Let me grab another I'm gonna grab one more paper towel. Maybe where'd I put all my paper towels out here just in case we have any spillage But for you, here we go. Oh It's nice and thin. I Like it So we got right about to that line. I'm going to wipe Any of the excess off I want to grab My stopper and put that back in there because you know, why not Being very careful not to get any on myself. Like I said, my my skin does not like It just doesn't like Resin for whatever reason. I'm not a huge fan of the smell either to be honest with you That's why I don't do a lot of resin It can get messy it can get smelly all the above but Yeah Here we go So we have our resin in I'm going to find a model. We're gonna get it going I'm gonna load up Cheetah box To we can do that together. Oh no found out the hard way that I'm highly old allergic to resin. Oh That's not good Mike never let the machines win. Thank you so much. I really appreciate that Uh Tyrone Brewer. Yeah 400 bucks for this thing seems to be a killer deal So I've heard a couple people now like Uncle Jesse say it's the easiest resin 3d printer They've ever used I'm looking forward to that to be fair. All right So let's come around the side here I'm gonna back this up because you're gonna want to see what it does I'm gonna go to print USB and We have chess There's nothing in there. Okay. We have a rook my guess is chess has a bunch of files. It's just not They're three they're meant to be sliced right I guess we're doing a rook that's all that's on here Come on. I love to see like oh You can copy it No, never mind that copies to a local file All right. Well, it doesn't it hasn't told me anything yet But let me let me show you the screen because it's pretty cool Pretty cool might as well show you I will smash that like button check. Thank you so much smelly. I thought that stuff was toxic You really need a place to not to be around it. I hear yeah, I I Normally don't do it in the studio here I do it in my garage back home where there's ventilation in the studio here I do have ventilation along with air purifiers running and that kind of stuff, but I usually don't do it here That's that's one of the things Some people can touch it with no problem too, which is really weird to me, but hey, you know All right. Here we go. You can kind of see it shows the rook here It shows I can delete or copy or I can print we're gonna hit print maybe if I touch the button there we go and Just kicked me into it right away All right. No, no No, like are you sure or anything like that? Just just a heads up none of that stuff. It's it's like let's go right now So it's calibrating the mechanical sensor it says on the screen don't touch the device it says All right, so it is doing a time-lapse. It looks like You can see right here. It shows record Shows what's gonna print Down here. It's really hard to see but it looks like two hours 22 minutes Wow, I thought it was shorter than that but we'll find out Here's your times and your heights and pauses and all that stuff But for now we got something moving Let's watch this vat move, which is gonna be pretty dang cool. I mean like Hopefully everything's good. We're gonna find out Oh nice James nice nice Nice $85. Oh, you know what Mike? That's a really good point. I will go over that and just just in a second here Let's see lens cap is still on. Oh, yeah, good point. Thank you I looked at my camera first not gonna lie Simplicity, yeah, I haven't done anything you saw what I did so far. We unboxed it peeled all of the films poured resin in put the build the plate on and It's going now. We wait. It's gonna do its thing I'm in this is awesome I'll be right back here. I'm gonna take a quick walk I don't know if you guys can hear me or not. I'm just gonna wash my hands and then we will talk about the Basics of resin resin 3d printing that's a good point Mike Hopefully you guys can still hear me, but it's a really a good point that you know, there are a lot of people that still don't know about resin 3d printing so We should definitely talk about that I'm just washing my hands just in case I touched any of that stuff like I said my skin does not like it If it's splashed on me or anything like that, I don't think it did but you know, I'd rather be safe than sorry Hopefully you guys can still hear me. I Have no idea I left I bailed on you. All right All right, hopefully you guys can still hear me while I was washing my hands so I'm usually really careful I'll go like that if you want that's fine. I don't think We're gonna have we're not gonna see anything for a while, so it's it's moving so that's that I wanted to see the the moving That that's that's you know, that's what I want to see. Oh there goes That's awesome So I heard it pop which is cool So that's a good thing. Let's see It is rocking and rolling so far it says two hours 20 But I'm sure it's gonna speed up because I've seen other people printing it at much faster speeds than that hour 50 hour 45 right around there Okay, so Quick quick basics if you don't know resin printing never seen a resin printer Haven't used one or or anything like that Very high level as you saw we put liquid resin You know and it's UV curing resin it I believe it's 405 nanometers it cures in UV light We put it in there We have a build plate that lowers itself down into That vat you call that a vat of resin and it presses itself against that the glass Well in this case, it's a it's a feb a plastic sheet it presses it against that right and In this case a screen comes on like I showed a little bit earlier It said elugu on it and it looked purple that was actually a screen coming on and showing the elgu Logo and then the what looked purple ish was UV light curing Where that that screen was showing it's kind of like a mask right so then what happens is your you'll go down in this case It's doing a little rook. That's probably gonna be like this tall It'll go down. It'll cure the first layer of that rook, which is probably quarter sized. It'll pop In this case this vat drops down And then it'll come back up. It'll cure the next layer. It'll break it apart It'll come back up. It'll cure the next layer and That is a interesting way to describe how one of these works now. This is an LCD style Resin printer they do make DLP somebody earlier was talking about DLP and that is actually That uses a laser a UV laser in the bottom and it fires the laser around to cure that bottom layer Or whatever layer you're on right so it fires the laser around in a pattern to cure your resin Definitely slower technology, but not bad technology though. Just slower Hopefully I've got most of that right Mike Mike incorrect me How you know if I got any of that wrong, but what's cool is that we can shut this lid if we wanted to and kind of Captivate the smell. I don't think I think it's just really gonna blow out in here Yeah, it's There's no filtration on this thing you can get little filtration pods that'll sit in this back corner. I Don't see I do not see a USB in there Some of the printers have a USB port you can plug your filtration pod mode in their pod in sorry Is it more accurate Is it more accurate the laser? Oh, is the laser more accurate here? Let's go back here for now Um Masking seems like you Could do manually with a bunch of masks and a light projector You probably could if you really wanted to take the time to figure that out and do it It would be messy It would and you could probably figure it out. It's just like UV curing resin, right? So Is it easy to switch over to fast mode? I think this is on fast mode. Let me just double check Good point though. Why don't we check? It is easy. I think you You just touch it you can go to your settings here We got bottom layer count normal layer height transition layers Exposures oh it is on high speed right now and I hit an arrow and I can turn it on to low speed so Yeah Currently it is on high speed It looks like Two and a half second layers So every 2.5 seconds it'll complete a layer and then you'll see it peel down like that Come back up and Another 2.5 seconds once that UV just kicks on I don't think you can see it, but it's definitely I can see it through the side of the printer here Let's see Shane that's funny. I think I hit the highlights. Yeah, so the difference between filament printing and This is that it's printing upside down. Yeah, so it's fighting gravity differently. There you go Yeah, so with resin printing your Your plate goes down into the resin your your print sticks on the bottom and prints up like this You know, so your plate raises as your print Solidifies right so as it prints so it is in the end upside down. You'll tip your plate up and you'll have an Right side up print Unless you orient it, I guess you could orient your model upside down and then it would print right side up But but yeah, everything's upside down in resin But it's cool. It's just just Something I'm noticing I definitely can smell the psorias tech fast resin It's not terrible. It's not really overpowering me or anything like that I'm gonna turn up my The humidifier. I don't think you guys will hear this but I'm gonna turn that up I'm sorry my air filter. What if you print something taller than the vat depth of the vat? Yeah, so This will do that it'll go all the way up to the top of your lead screw up here Well, your your build plate will go to the top So in this case, I think it was like 280 millimeters tall You can print and that's fine because the bottom of the print, you know Where it's printing stays in that vat the whole time. It's really cool Let's see. I think it's 280 tall Of course, I'm looking through there. No, they're their book here And I have to find the page, okay 220 220 tall. I'm sorry It is a build volume of 218 88 millimeters 122.88 millimeters and 220 tall Awesome awesome James. That's very exciting So, yeah, it's very easy to print something taller than the vat because the bottom where it's actually curing Sits in the liquid. So it allows it to print much taller You know as long as that bottom piece is in the liquid and you can be cured. You're good Do you add more resin and how does that work? Yes? You add more resin and how it works is you just pour it in If you have a very tall thick print it definitely I could see it using all the resin in this vat If you have multiple prints going on at the same time or multiple models on your plate I should say I could see it using quite a bit of resin and you just add it You just basically take your resin and you can actually pour it right in the side here Some people pause their prints You can do that too I Don't I can't speak for everybody, but I can tell you I have historically not have a great success pausing and Restarting resin prints Mike. I don't know how you feel about that. I think you're a bigger resin guy than I am But I just don't I've never had great success stopping a resin print or pausing it and then continuing in this case I'm not sure If it would just drop the vat or what? Oh If your model exceeds the 220 millimeter z height You can't just like a normal like a FDM printer filament printer You only can print as high as the machine will let you If it if your model is bigger than that you have to break it down into smaller pieces You can print multiple pieces at once on the build plate as long as they all fit Or print multiple prints and put it together Yeah That's right It's actually bubbly water water Yeah So very easy. I mean this thing is pretty awesome. Uh, everything was very easy to Unbox Um Just double check and we're good. Everything was super easy to unbox. Um I mean what's crazy is that you don't I didn't have to level it which is awesome Some of the newer ones are coming pre-leveled anyway, but this one is self-leveling, which is great um Yeah, I'm excited to use this. I'm really excited You're flying on thursday awesome chain Uh pause is okay, but if you wait too long the resin settles out pig pigments tend to sink. Oh, okay I've had just terrible luck then when I pause one it just inevitably fails um I'm excited for this. We could fly in on thursday awesome Shane, I'll be there thursday as well. We I think I fly in and we get there about um I leave from milwaukee around noon or something like that I'll be sweet if we're on the same flight. Um I put my resin printers in a sparse bathroom with a good exhaust fan and a small heater because it likes to be warm absolutely Absolutely It's a good good plan with the exhaust fan. I like it Excuse me I was up super late last night I was up way too late Flying out of apple tin around four awesome. So you'll be there later I'm guessing uh Let's see I'll leave at like noon. I get there like oh, uh one. I think it's a two or three hour flight um If that makes you what are you like five o'clock five thirty you get in or something nice Yeah, I'm I'm super excited for this weekend rocky mountain rep rep festivals going on We're gonna be there. Um if if you did not know They're giving me a microphone and I get to be the mc for the weekend So that's pretty sweet. I'm pumped up Got to I gotta save my voice, you know Okay, cool sweet sweet sweet. I look forward to seeing you up there then So, yeah um Time we got Let me grab my stuff I know right giving me a microphone. How you doing? Uh, who's your wife? Who is your wife doing? Oh, how is your wife doing with the miniatures stuff around and the channel good very good um, yeah, her stuff is killing it and What's crazy about um her stuff is she's doing it all fdm You know, it's all filament with a point two nozzle the small small stuff is point two nozzle some of it's point four It is just crazy. How small Um, how absolutely small, you know, those printers can print now That's so funny. Oh I'm just gonna grab they sent me an email with the newest, um cheetah box Yeah, it's pretty cool stuff that she's making Um, thank you so much james. I really appreciate that if you're here and you have not done that Hit that subscribe button. Uh, I would really appreciate that. That'd be awesome We are we're rocking. Whoa That was crazy. It made a new sound made a new sound. Oh, it's fast check this out Hang on Let's go here Make sure you can see this Let's see if you're seeing this Look how fast that's going Holy so it had to get through those initial bottom layers And now it's kicking in to the two and a half second layers Whoo Sure I'll give you a link. Give me a second here Holy mother This thing's rocking Rockin Just getting Getting your link here Jeez This is Flipping awesome. All right almost back here That is fast. Yes It's very fast Self-leveling. Yes. Yes. Yes. Yes. It's very quiet very very very quiet And it's crazy fast Um, I just posted a link if you wanted to check out hers Thank you so much james. I appreciate that. All right Let me grab this, um Let me grab these files quick And we'll get Let's see. Yeah There it is Just getting the files to load the software Looks like it's a google drive. I bet you they uh, you didn't share it with me um With my gmail account Oh, it's a microsoft actually Hang on Weird now I got to remember that password Sure, maybe It's a one drive link And what I got right now is a flashing A flashing page. This is crazy. It's like loading stopping loading stopping Something went wrong and can't sign you in right now. Get out of here Just share with me There's definitely nothing in this Link here It's a blank page It's a one drive blank page. There's nothing here Um, which is is not great Let's I'm signed in. I wonder if they shared it specifically with my email or something But I don't have an account with microsoft with that email address. So i'm not sure You see the print coming up. Are you um, what are you printing? It is a rook Yeah, it did come with the drip tray Um, her prints are crazy good. Yeah, I I 100% agree. It's crazy the stuff that she's getting Um It is absolutely crazy. All right, so it's asking me to sign into microsoft again Um They want some password, okay Great signing in So I want to say no Let's see So Whoops. All right. So give me the dang cheat the box here What's crazy is when I click on their link It's just flashing. It's going to a one drive and closing and going into one drive and closing So, um, I wonder I'm not sure why it's doing this I'll deal with it later Um For now, let's interact. Okay. Here we go. Meeple's champ. What's up dollar 49? Thank you so much. So yeah, mine did come with a drip tray It is right here. I think they all did I think most people that didn't find the drip tray Didn't check the box. Um, if I'm if I'm being honest Uh, how noisy is the fan while it's not it's so quiet like I can I can put my mic literally right next to it Um here It's very very quiet The loudest thing on it is the actual vat moving Um, let's see Happy to have let's see What do you cure your resin prints with? Um, I have a curing station. So I love, um, the the Wash and cure stations are great for these resin printers. Um, everything's just you just Want one if you can afford one it makes everything way easier now I don't believe that this vat Uh, I keep saying that I don't believe that this build plate um platform fits in The big elgu washing cure station. So they really need to come out with a bigger one to make sure that it fits um That's what that's what it's probably gonna have to happen with this one because it just I guess it just doesn't Fit in there some people take the plat Excuse me. Some people take the whole platform out and stick it right in I am more like a Pre-rinse person. I like to rinse off the stuff get like an initial rinse. I like to get my model off of the build plate um And then just rinse and wash my model Alone and then cure it. So I have a curing station Once the model's rinsed and clean and and dry The supports are removed if there's supports that kind of thing Then I stick it in the curing station and it cures it with UV lights for a set period of time It's really cool okay, so Let me let me see something. Let's see if we can Catch a glimpse. I don't think it's lowering enough yet Nope We can kind of get an idea of how much that vat moves It's still pulling. I still see suction, which means the model should still be attached to the build plate, which is great Yeah, I still feel it thumping. So that's awesome Uh, the bigger tub so you can at least uh, keep the original spinner. Yeah, that'd be cool That would be a good idea Just release a tub that fits like a wider opening that fits on the top of the original base Great idea So there is a camera watching this way from the other corner It's not really seeing much right now. It's probably not going to see much till this thing gets out of the You know starts coming up a little further and with this model. I don't know how much it'll actually see Because this model is not very tall Oh, what type we got? All right It is about 715 um Any questions? So this is the elgu Saturn for ultra And i'm just gonna check where my weather is here. I don't want to be Caught here in a storm When I have to leave Mostly because no one does right like you don't want to go out in a storm Um, oh, yeah, we're okay so far. Let's see Maybe I'll just not come over here. I'd be okay with that Ooh, it's gonna go to like one in the morning nice, um So yeah, any questions? Let's let's check this thing out real quick. I want to do that. Um I want to show this I want to show their product page. There's a link in the description below If you want to check it out Let me just um Let me just do this Mars really yeah, the mars three was a small machine. I remember I had one. Um But yeah, if you have any questions shoot them out there We're we'll go for a little bit longer. This thing still has quite a bit of time Um, so I'm not sure I'm gonna stick around for the whole thing because um Let's see here chrome tabs share Oh, yeah spin to win. All right, sorry So we should be seeing uh, hopefully you're seeing this chrome tab here Um, let me just make sure it's showing it's not showing yet Boom. I'm actually just gonna do this So you can kind of see the screen there So, uh, this is a little bit about the Saturn for ultra It is three hundred and ninety nine dollars currently that is a great deal For a printer this size 400 bucks 12k Um, I've not printed with this thing more than you've seen so far So I can't like it's not a long-term review or review at all, but first looks Very cool a large ultrasonic cleaner to wash resin prints before drying and carrying nice It must be a big one Excuse me. Must be a big one. All right so If we uh, we can scroll down we can see some things. There's a mini heater There is a Water washable resin. I'm not a fan of water washable resin just a heads up. Um, here's another tank Uh resin tank so the vat you could get for forty seven fifty another build plate for forty seven fifty Um, not too bad prices there if you want spares or maybe an extra one you can pull one off drop another Build plate on and just keep printing. Um And then they have some more resin here. Um, here's a whole bunch of of pictures of this thing There's your camera Here's your touchscreen That's everything that comes with it Some resin models that's been on this thing. So it does have tilt release Technology, that's what we're seeing with that vat dropping instead of the whole Build plate coming out of the vat and going back down in it. The vat just tilts away and peels it It is a chip on board or cob Light uv light with a lens. It looks like there. It's got a ai monitoring So it's supposed to tell you that you're close to being out of Resin and that kind of stuff. I have obviously we're not testing that yet, but like, you know, you never know Auto leveling that which is really awesome so far a 10 inch 12 k mono screen, which means it does not show any color It's only mono Um, let's see It's ultra fast. Um, yeah, we're seeing that right now 150 millimeters an hour Is crazy for a resin printer. It's very fast Uh 12 k like we saw Yeah print right out of the box with auto leveling we've seen that already ai Let's see it's going to say like status Um progress of your prints capture, uh time lapses, etc mechanical sensor Um So it's the supports of residue detection to prevent damage to the lcd scheme Screen as well as a resin shortage and leveling failures alarms Uh, okay. That's awesome Yeah, so um Really cool. I I wanted to find the Uh, I wanted to find cheetah box and actually see it on the screen to show what it looked like, but Like I said, it's not giving me. It's it's not being very nice I have to figure that out 15 liter ultrasonic resin cleaner. Whoa holy moly Useful for removing dissolvable pva supports. That's cool So, yeah, we're rocking it this thing's printing the the, uh Time lapse is rolling um I'm gonna have to get the Other stuff going to make sure You know to check it and see the time lapse and all that stuff Uh, I don't think the time lapse currently sees anything because it can't see anything right now. It's just not out of the vat enough um But super cool deal, uh $399 for this thing link in the description. I'm telling you first impressions Very impressed. Um I love the vat thing You know as far as the tilt release technology. They're calling it Um, I love that it just clips on There's no leveling uh as long as that holds up in time. That is phenomenal That's like auto bed leveling on an fdm printer, right? Um, you don't have to slide your paper in and push the The build plate down and like get the right tension and tighten your build plate and all that stuff This thing is auto leveling which is great um I don't have a giveaway tonight. Um, that's a good idea. I should do some giveaways soon I like that idea I will make that happen soon Excuse me. We did get it connected to the wi-fi which found that had a firmware update. So we got that done right away Excuse me All right My marz v1 units and saturn v1 seem tiny compared to this model um, you know I can't Try to remember. I thought I think I had a marz Yeah, you're right. The original marz was was small, huh? I remember then I think actually I have one sitting over at the other place um I think I had a marz 3 Pro or something at the time too, which was supposed to be the new latest and greatest at that time And that was really cool. Um, this thing there is a lid. I'm going to shut it just to see Um There we go So it does seat nicely Has a nice, uh, a seal on it I mean, there's no like physical sealing gaskets or anything like that, but it definitely feels like it's Excuse me. It feels like it's tight. It sits down nice This printer is so quiet The loudest thing in this room right now is my air purifier over here. So I got to say this thing is super quiet I love it awesome Well Any other questions? I think I'm going to bail for the night. We're going to call this an early night. Um, I in the next couple minutes here um I will post some pictures. So I'm I'm getting ready. Um For the Rocky Mountain rep rep festival. I am not sure I can get back tonight Uh, but I will come back tomorrow after work and um, I'll get some pictures of the rook and that kind of thing I'll get it Washed up and cured Um, get some pictures. Maybe I'll take some footage of taking it up getting it off the the bill plate that kind of thing um, but Um, oh nice Yeah, the the creality how it won pro was a I think that was a pretty decent printer. I had one Uh, I gave it away to somebody who needed one And they're still printing with it today. So that's cool. Um, but yeah, um The bill plate might fit on top of the basket might fit. Uh, uncle Jesse said that it could fit But it's probably not a great idea If you just like in the top, right? Um, I I don't ever do mine like that. Anyway, I take the models off of the plate and then wash them. Uh I just I don't want all the extra resin and stuff in there Um, another thing I like to do is when these resin prints are done I like to just let it hang for a couple hours and drip as much as it can Something I did notice is that top of that bill plate is got a bevel So hopefully that resin will run down and drip off which is nice um Yeah Mars is the size of a cell phone screen. Yes This is 10 inch. So it is definitely the size of an ipad screen and you're right. I I remember, uh, my mars My mars and my mars 3 pro. I think I had and I do remember that now. Yeah Uh, I haven't used those in a long time But This thing's rocking and rolling. I can't believe how fast this is. I'm gonna see it. Can you see this? No, you can't really see through that screen, which is great But I'll give you one more shot of how fast this thing is going. Thanks for Thanks. Good show kind of want to see the print But the rook isn't that exciting. Absolutely seeing 10 benches pop out. I'd buy you red balls and say to finish You know, I I think I'm definitely gonna have to do like load benches up or do something. Yeah Um It prints the same time The only thing different if you had one to 10 is how much filament you use So the time is the same that That doesn't matter if it's all about as it's all about the tallest model You have on the build plate at the time it's so if they're all the same, it's going to be one time across the board It's just going to use a lot more resin. So let's see Now you can kind of see I'm going to get you over here a little bit more So you can see that resin that vat drop Um, if I get you up you can actually see Chunk you can see it kind of peel away from that build plate Uh, very cool You're excused Hey, no problem. Uh, I hope you I hope you love 3d printing And if you have any questions feel free to hit up the community and I have a ton of videos too So hopefully you have a great time with 3d printing. It can be fun. We'll say that I hate, uh, I don't hate I don't like water washable resin I'm a I prefer regular regular resins. Um for something like this. It is very fast So that psoriatec Uh fast resin is very thin Um And you're gonna need a thinner resin for something this fast I just don't know I mean, I imagine any resin could work. You just might have to slow it down a little But um, like mike said, uh, and he does much more resin printing than I do. Um, this thing is fast for a resin printer Yeah, I'm not I don't like the water washable stuff Uh way more clean up. You can't just wash it down your sink drain. Absolutely. That's something that I don't think a lot of people understand. It says it's water washable. Yeah But you can't just rinse it off in your sink. It's still toxic So, uh, not great. Um, my I just don't I don't like it. I My problem is it was like soft And you may tell me what you've seen out there if anyone has used it before but I just never got it to cure the same as regular resin. Um Someone gave me some to do a video once, uh, and I absolutely I didn't even do the video. I just did not like the resin Um It wasn't worth printing. I I don't I just didn't like it You might like you might love it though Tripod did his video tripod's graduate of video. He used water washable resin. So he didn't have any issues Uh, it cracked later. Yeah, never cured properly. I I agree I just never got the same results with it But cool. Well, I'm gonna get flying if there's any more questions last chance shoot them in the chat Uh hypoallergenic resin will be amazing. Um, that would be cool. Uh, otherwise again, this is the elgu Saturn for ultra First initial impressions This thing is pretty awesome. Uh it's fast Literally pull it out of the box unbox it add your resin and your printing which is really cool Um, if you were not doing this, I would say 10 minutes from Unboxing to printing that'd be a very fair time um All I mean, but the proof is really going to be in the pudding right the proof is going to be in the prints It's a 12k mono screen. So it should have very good prints, but again all the proof is right there Something I really do dig is that the cheetah box has The link now so you can watch the camera inside of this from your computer Just check on it that kind of thing which is awesome. Um, but Yeah, I think this thing's gonna be good. I I'm gonna I'm gonna play with this. I think Also, I'm gonna get my um I'm gonna get some of the models my wife has been modeling and throw them on here and see what it does You know, we we've seen what fdm can do. Let's see what this resin printer can do. I think it'd be pretty cool um Yeah, I would try normal resin But remember with normal resin you have to rinse it with like isopropa alcohol clean it off real good that kind of thing So, yeah Cool. Well, thank you guys so much. Uh, hey sam. Thank you so much Thank you all so much for being here. I really appreciate hanging out with me I know it's just a a random Tuesday night But I did want to get something out before the rocky mountain rep rep festival on the elegu saturn ultra or for ultra sorry um and Now i'm gonna go, uh, you know, i'm gonna go home I'm gonna eat some dinner with the family get the little guy in bed and probably get ready for the rocky mountain rep rep festival Uh, stay tuned thursday. I should be releasing a video on the soville svo 8 That's why I was here all night printing Uh stuff for that so stay tuned. That was last night, but yeah, I was here quite late Um, uh getting a video done for that. So stay tuned thursday for that If you haven't already, please hit that subscribe button mash that like button and uh as always I hope you guys have a great night. I hope you have a great week If you're going to the rocky mountain rep rep festival come find me say hi Introduce yourself if I don't know who you are Because I'd love to meet you in person. So Mike, I I don't know if you're coming, but I love seeing Mike at all of the festivals He's got the coolest table. He always has some really cool stuff to give away to um Never know Mike and Mike Jones that you never know James, I hope you enjoy your new printer everybody else. Thank you guys for being here again. I really appreciate it Uh too long of a drive. All right. Well, maybe mirf and and maybe earth or uh 3d printopia too. So, uh, yeah Everybody else if you're in the colorado area This weekend rocky mountain rep rep festival in loveland colorado if you get there, it's free to come in So if you're around the area, maybe come say hi So see you guys later. Have a great night and a great week and we'll see you Next time. Bye everybody. Keep printing