 I have a nice machine here. It's not working very well. I'd say it probably needs clean would be a good indication So I have to get this thing cleaned up before we can even tell what's going on, but First looks here. It looks like there's no water down there. So it's probably not filling correctly. And so we're going to clean that up Off just go ahead and tear this thing completely apart and clean it out because this thing's a wreck so Pull the screws out. It's completely apart and clean it Just go back there and scrub a little snot out of it I mean that there some of this is kind of because they have bad water. It's country water So, you know, you're gonna have calcium rust But I mean it's just It's just bad news bears man water sensor out because I mean That's just It's not gonna sense water when it has that mucus on there. I told them they need to move the trash can that you see Right there does that trash can it's got all that leftover beer in it and that yeast comes out of there And you'll see the same type of thing in restaurants that have a lot of bread rising like sub shops and stuff like that so That's why it's best just to Have a ultraviolet light system in here Or a bipolar light system that kills the Growing organisms now some of this crap. It's just not gonna let go. I mean that literally That's you're gonna literally scream Straight up to get that out of there so it's It's gonna take a little bit of work, so we're gonna go and scrub away here. All right, so we poured the whole bottle Nipples safe in there We're just gonna put the stuff so is this things I Scrubbed it that's as good as I can get it even when I scrubbed it so We've done scrubbed everything we can scrub and Although it looks a little better These are stain marks. These are these are what this is what happens You have really bad water your waters Got to be halfway decent quality Machine work, right? I mean that that right there that brown stuff on the side Literally it's etched into it and I've had machines where I've just said, you know what? There's nothing more I can do because it's just completely ruined It tends to eat into the material and you just came in a valve. So as a ditch effort here I'm basically trying to Use my fancy utensils here and let the soak and as it's soaking kind of go in there and try to See if we can get some at all chances are it's probably not gonna do any good So when it's all said done, we'll probably just run just back through through the machine I'm s3 Concentrate Make sure you don't get this plug in there because if you do you'll corrode those When the electricity starts to flow through there, they'll Start to corrode you'll have problems later. I Know firsthand Because I got in crap and good before just doesn't quite seem potent enough because it's not attacking it as good as what I normally would see But there's probably good Three gallons or better in their water So we're just gonna let this thing soak for a while see if we can get it clean So great. If not, it'll be as clean as it can be At least there won't be no Slime on it. All right. There's probably the best trick just having two bowls so that you can basically Raise it up there because usually that leave is a little too short to get down in there but We're scrubbing out of the specific can so Yeah, we'll get the loose stuff out of there that calcium. It's not gonna go nowhere. That's just Too long too late Hopefully the pump even works and I have a feeling it's why it wasn't pumping Hard to say I just can't get out or I think I'm gonna get my sprayer and just spray up in there and get it So even with the scouring pad that I do not recommend you use to put more grooves in the plastic Still can't get it as clean as what I would like to see it I mean, it's better than what it was and then the slime is pretty well gone, but You're gonna get all that calcium off. Yeah, that's just The product of bad well water so that's It's good we can get that thought about even running my grinder wheel brush wheel on it, but you're just gonna put a crapload of more Grews in it, and then that's gonna make the water stick to it even more and it's just gonna compound on itself It'd be really bad So we're gonna go and get the rest of this thing cleaned out and see how she runs All right, so I went and picked me up a toothbrush Figured Decent to get right in behind there in that little spot there It's not big brushes don't fit. I got a medium about as aggressive as I can get because they really aren't made for ripping your teeth apart But We're getting into those spots, but you can see this stuff just doesn't want to release It's just etched in there. I mean flip the brush over Yeah, so anyhow, they've got most of this about as good as you're gonna get it I'm gonna go ahead and run sanitizer through it and we're gonna see if this thing makes ice I think our biggest problem is mainly just water like I said water sensors and gummed up and everything else See what we can do with this thing yet We got it back together. Like I said, this stuff here does not want to come off But it's clean Got to all down in here because that's really important to get to you guys Don't forget these areas down here. That's where all the stuff hides We're gonna go and run the cleaner through it now and See if we can get it to pump. Hopefully there's nothing wrong with the pump That's one of the reasons why a lot of times I don't clean it first But this one was in such bad shape, but didn't really have a lot of options here so Making ice I didn't ask for you to make ice. I need you to clean So Hit the clean button. Come on, let's make some cleaning. It's not even wanting to go into clean though. That's nice Great the keypads junk. That's good So we got a jump keypad wonderful This is a common problem with the Manitowocs for some reason the keypad goes bad on them And then as I said you can't you can't even scroll down to do the test mode on it and stuff So it is at least making ice. It's better than most of the time, but the buttons have all given out All right, so I've got to put the water sensor in there so I can take it back out again We'll have water coming through so we start over again With the pan in there Water filters, okay And I did hear the pump kick on We're gonna freeze down now see whether or not it circulates the water We're gonna have to order the keypad and when we come back we can run the cleaners disinfecting stuff through it So the water pump hasn't came on yet, which Probably is our next. Oh, there it goes. It's actually working good water so We're gonna let this run for a little while see how it does It should be okay. I would hope because the plate was iced up as you seen when we first got here We're gonna let it run for a while. We're gonna time it. We'll see what we get out of it All right, so it took 18 minutes to go into harvest. I had to adjust my five sixteenths adjustment there Basically, we just went into harvest a moment ago. So I'm starting to time that I can't really check my Frequency of what the water Ripples are putting across so you could always go back to default far as the gap between there which is Point two one inches so a lot of times I'll use a Allen wrench Closest one to it and then put that between the metal and the bottom of the plate of the microphone a thickness sensor and Adjusted off of that so Looks like we're getting ready to drop already at 58 seconds. So we probably are fine on our refrigerant charge I don't like the way it's coming out that far and not dropping It's not a good thing so it's probably all that calcium build up on the Nip of that it's just holding it so unfortunately that's going to cause them ice to melt Go ahead and stop her. I'm gonna flush this pan out here For anything that came loose while we were cleaning it that I couldn't get off of there I didn't rinse everything out once with the Pillar water as you've seen and so I'm gonna take what's in here now and rinse that out and then put her back in Back into place here we'll stir her over one more time. I've got the So we'll come back and we'll run the cleaner through the actual machine that disinfectant Sanitizing solution through there also when we come back because right now I can't get that button to work. So The drain was plugged up. So I went ahead and nailed that with the my drain gun here And that blew it all out and ran hot water like the old plumbers would say run hot water that cleans out your pipes Good as you can get for today. So that's all good there We're basically gonna run one more Batch ice through here see how long it takes to make and then we'll probably take off If you guys like the video and you want to see more like it make sure you hit that subscribe button Until next time guys, we will catch you on the next one