 Yeah, I think yesterday, yesterday must have took a toll on us mentally as well because we're not with it today The plan was get this done get the edgings in and get that foundation concreted today while I had my extra man But then wasn't to be day two my last day before I go off to a Sweden see the girlfriend But today it's full steam ahead we work. So plan today is we're gonna get everything Concreted so I think first thing we do is get the echoes concreted in Get them sorted then obviously we've got these to go in and we've got to dig a footing for This regular wall that we're building so We're gonna get that set up when we can Right now. We're just there waiting for some power I think once the once you've knocked another customer over here. We'll get plugged in and start some digging So, yeah, I think that's about it. So That's here with his mixer. He's got as well as I'm ready mixing some concrete Yeah We doing a we're doing any motors today or just concrete just concrete echoes echoes Edgings foundation the edgings just go in this side just this side Because the fence Edgings along the actual fence post Told to drive back and then whatever they decide to the drive They've got the curb edge into work, so you can block pavers down it The actual drives held. Yeah And then we've ranked up Steve from Jane APA. He's gonna be picking all this upon Monday. Did he say? So Monday all that'll be gone in the big load of three ton of demo tail we're taking its place so And obviously would yeah, well dad will just be spreading that out So whatever the customer decides whether she wants tarmac or edgings or flagging It's all laid there already then but anyway enough talking. Let's get you set up somewhere and then we'll start some digging again so right now We're just getting the drainage set up because Because where this pipe is and the way this tarmac is it's higher here So what we're going to do is we're going to redirect the pipes in this way Have it come up here, and then have the bit of a fall on the echoes Just to compensate for it to a line up with that tarmac So I'll get you set up while we figure this out and as it tries to rain on us Pushing adapter a T2 230s a straight coupler put two pushing adapters in case that fancy To Yeah anything else Lubricant and obviously ties and plug. Yeah, just send that to me Okay That sent you now Okay, that's all sent over to dad So he's going to go off and pick up that stuff leave me again And I think I'm gonna get some of that Doug for the air for the curbs Dug out. Hey, yeah, how how wide am I digging it? I thought I was digging that bit This is fully four inches wide maybe the width of the small speed Right You've got your Yeah Okay Right we're filming now because Obviously dad's done his tool station run go all the supplies that we needed As I was saying that guy's always a paper and stuff needed so Get them all touched. He's cut the pipe off cut the collar off Now it's just a case of getting all the Things to line up. I'm getting a mix in at the moment for concrete. So that's what I'm vanishing off to but There you go Where was it? Oh, there we go Chris the verse who's got the I'm gonna get a pretty shit back on Where's the spanner you had it didn't you? What do you mean the adjustable spanner? What do you want? Don't you don't show me your handiwork? Not sure there's anything that's a 30 then a 15 and a piece to ban seal and a push in That's cost a fortune that tiny second I'll tell you what So now we can crash off now Put our bends in there and bring that thing like I was talking to you Yeah, you can see the distance a bit now like the one's gonna meet up here at the end You dig in now, and I'll just tighten these band seals up It should be better in there All right, so there you go my mix is almost ready Whenever dad's ready. And yeah Hey dad 20 minutes of footage we got you then I'm 462 Now now so I can adjust that whatever I want it now I'll do that with a screwdriver So we can't over tighten it Crack a little kit this We bought that one, okay for that one When we bought this we needed to wrap the bits so Hold on battery died and we've got to change it for the progress We've got some echoes in But then fortunately, like I say battery died, so we've got to play but They're going in all right so far. We've got them hooked up to the Fitzbricks Got one like set to the height there and one here so then Just turn them in and concrete in them I'm doing the mixes for dad. I'm just laying the concrete for him. He's setting them Setting it down putting the echoes in And we had a bit of a a smooth brain moment today. We were there fretting that We didn't have the right curve the right bend to go in And then at lunchtime We just we realized Why don't we just dig Make the trench work so, uh Yeah, I think yesterday yesterday must have took a toll on us mentally as well because we're not with it today It seems but So that's what dad's doing there. He's I've made a quick start but I'm going to get the next mixing So he's doing that But yeah, I'll get you set up now so you can't actually watch The echoes go in. How's that? See you in a sec Alex just get me some stone that As usual looks nothing that's took us half a day that We're usually going to put just put this um Just put a tea on it and come straight back into a into the echo echo That end the drive slips away that way. So we're going to have to put that at the far The low end So we're coming through pretty level here And it just drops off otherwise the the echo be sticking above this drive here. So we're just going to try and follow What's there? So we're all in now nearly ran out of pipe Putting bits and colors and stuff trying to make it work And I found a piece of pipe around the back which is 1100 and we need a 950 piece. So that's in now got our Got our 245s to get a shallow bend on that end Straight into the T and then you've got the gully flushing it through With the insert pipe insert one end Bandsail on the other Oh, what a pullover And we dug the trench wider to get the 30 degree bending otherwise we can't get the echoes in today Because it's Saturday afternoon everything's shut. I don't really want to go to wicking to the B and Q So the plan was get this done get the edgings in and get that foundation concreted today while I had my extra man But um wasn't to be That's probably about three o'clock now. I'll just have to go get the echoes in that's that's that's given and then maybe get a couple of Edgings in if we've got any concrete left So yeah, um Let's go on time. Let's again while we get this in All right, there's my boy just got the still start again because We're really congratulating each other saying how great we've done and look how great it looks and wow made up this time blah blah blah You see it drops away the thought When you stand that end and look that way it looks great when you stand at this end It's nice and straight Till he gets to the end there pretty sure you put a straight edge on that he just wants to kink it out To get a kink out of it. So I wonder that now We have a tough one, but as you can see Echoes are in drains in and dad's just back filled it up now and we did manage to get three curbs in So we're over half done with the curbs. So well done. Yeah, it's a tough one, but we're going to get Most to get what we set out done today Most of it So tough Yeah awkward and the rain didn't help and the humidity a lot of the elements were against us today, but So I won't be seeing you until I don't know what job I'll be seeing you at next, but I hope you're all doing good Hope you all take care Be sure to uh like and subscribe to the channel while I'm gone because again the massive help we greatly appreciate it I'll have to uh I'll have to film a template for dad to use in the videos while I'm while I'm not here But uh, yeah, so I'll see you soon. But um Pass you over to dad tomorrow. Take it if take it to me dad