 What's up, Hot Makers? Welcome to Hot Makes right here. I'm Nerdy J. This, my friends, is Shannon. How are you doing, Shannon? What's up, guys? I'm good. I'm good. How are you? Great. Another week went by. It's so fast. Crazy. It's going so quickly. I don't know how it's mid-February already, but here we are. I'm fine with it, though. Bring on spring, please. Right. Mighty Bean says that intro. Thank you. Thank you so much. Before we go any longer, I have to shout out Andrew. Thank you for the $10 on PayPal. I already saw it. He said he couldn't make the show tonight, but he wanted to make sure that he got his contribution of the Andrews, and he said have a good show, but he can't make it tonight. So thank you so much. You're the best. Don't forget we have all the cool stuff going on, but if you're looking for anything cool we show tonight. We have a link in the description below. Click that link. It'll take you to a Google Doc. Find episode 90. Holy crap. 90. And you'll find all the cool stuff that we show off. Don't forget to donate if you can, if you want to, to the Oreo Fund. There's a lot of fun stuff going on Twitter right now about the Oreo Fund. It's a dog. It got crazy. You'll have to go check it out. A dog named Oreo. That's all I'm going to say. It turned into a wet dog, and then it went crazy, but a lot. You have to find it on, you have to find it on the Twitter's. Also, yeah, don't forget we have the PayPal link. That is our Oreo Fund. And if you hook us up, we will shout you out throughout the episode. We try to wait towards the end of the show, but you never know. I might just interject. It happens, right? Exactly. Exactly. And I see all the comments coming in from all of the different platforms that we are on right now. So thank you guys for joining us. We are broadcasting on every channel tonight, YouTube, Facebook. We are on Twitch now, which is fun. And obviously the main channel. So make sure you're subscribing to the main channel. We really want to hit 1,000 subscribers, right? Yes. We're at 640. 640, did you say? We just checked. It's over 600. And we really want to hit that 1K mark by the 100th episode. We have 10 episodes left, guys. 10. Can we do it? Can we do it? I think we can do it. Oh, we can definitely do it. Hey, good news. Geary is back. We can we can summon the Geary by saying, Geary, how many subscribers do we have on our YouTube channel? Calculating. Oh, we didn't give him enough for him. 642. Whoo! 642, you were right. What's up, everybody? I see you chatting on all of the channels. Thank you so much. If you're watching on, like Shannon said, on any of the other channels, don't forget to come find us on the main HotMakes channel. We're trying to hook that channel up. I see a bunch of people on my channel as well. So great crowd so far. We have an awesome show. We're going to start the show off today by talking about the things Filament February giveaway. And I am so pumped about this. Last week we announced it on the show. I think the following day they went live with it. It is such a cool. It is such a cool giveaway. It is. And this is open to both the 3D printers and then also the 3D print designers. So I know a lot of you guys print, a lot of you guys put out those files and that's great. And every day two of the community members are going to be chosen to win a $50 gift card to Protopost. So it's going to be fun. You have opportunities there. Make sure you're participating. Yeah, a bunch of winners already. We're seven days in. That means there's been 14 $50 gift cards, I believe, to Protopost to give it away. I think they're doing it every single day. It's been eight days, guys. Well, that's your birthday, right? Here you go. The other cool thing about it is not only that, but at the very end, the grand prizes are so sweet. It's a year subscription to Protopost for the community side, which is three kilograms spools of Protopost every two months for a year. And the designer side, if you're on the designer side, you could win an 11 inch iPad Pro with the Apple pencil. And that's like almost $1,000, like $930 or something like that retail. So I'm super pumped. Don't forget we're going to drop a bunch of links in the description already. There we go. Perfect timing. So there's a link in the description of the video also in the chat, but we are super pumped to be a part of it. And I think the first thing we should do tonight is jump in and take a look at some of the submissions that have gone on thus far. So what do you think? I think that'll be fun. I think that is a brilliant idea because there's been some nice reading things. This is for Filament Friday, but we'll see if Geary has his wheels on because we have not done a hot or not segment since you've been on here. So we're going to call this a hot or not segment just because I missed the bumper. Let's see the bumper for the hot or not segment real quick. Okay. I like it. I missed that. It's been a long time. Yeah. Yeah. That's hot. Yes. We upgraded the sound board. It sounds identical to what it used to, but it sounds identical. I love it. I missed Geary. We missed you last week, Geary. Yeah. I missed me too. Somebody unplugged me. With the janitor like three days to figure out that I wasn't plugged in. We told everybody we rebooted you, I think. Oops. Cable management. That was the problem. For the first thing, he says, first day of Filament February. Thank you so much to things and Proto Pasta. And he made this sweet heart. Sweet heart. I get it. Filament February 2022. Nice work. And I believe he was one of the winners too, by the way. I think he's in the chat. Congrats. I believe he won one of the days. So that's awesome. Everybody's saying hi on all the different channels. It's so crazy. All of a sudden I'm seeing stuff fly on our chat over here because of all the different friends. I have 80 of you guys in here right now. This is cool. So good. And we just started. Thanks. The 3D designer that won the second day of Filament February was Layer 1 3D. Give them a follow on things. The new model they uploaded was, they uploaded some new models. You might recognize some of the clever work like this right here, which is super cool. Come on. A mini cooler. I mean, you can put your symbol of beer in there if you want it. Travel size things fit in there. What was that Gary? Local maker Michigan just called himself out. Spelled February on his print. That's okay. Hey, that would require me to learn how to spell February. I love it. These coolers are so cool. These are some of the things like, it's a baby 7-up bottle it looks like. Or a can, I mean. Maybe that is actually a 7-up can. I don't know. This is a little one. I need a banana for scale. Oh, there. We need a bagel hip poster. You want a banana? Yes. If you don't have a bagel hip poster holster, then you're, I mean, I don't know what to do. This is awesome. There you go. The bagel holster. Just in case you want your french toast bagel on your hip. I'm sorry, can you say what that third word in that image is again? No, not this. I need to hear it again. I want to make sure I heard it right. It's a bagel what? Yep. It's a bagel. All right. What do we got next? What did I say holster? Multiple times you said holster. That's what it is. It's a holster. No, you did not say holster. All right, here we go. Elizabeth Bishop, you're next. I've done a little update on my thumb book holder. You can get it on things. This is pretty cool. Pretty sweet idea, actually. I like it. I'm not a huge reader, but I know a lot of people who would actually dig this. Yeah. I haven't had time to read a book recently, but I would totally use that because I would always get tired and then it would close and I would lose my page. That's helpful. I like that. You can follow sleep and your thumb is still in your book. I'm always multitasking, so I always have one hand on it. Instead of a normal person who would open a book like both sides. I think that's a really cool simple print. Doesn't look like it would take long. Very cool idea. Elizabeth Bishop, nice work. What do we got next? Ethan's dad. This could be the one of the day here. Let us know in the chat if this is hot or not. This right here is the things Mini Jim in a box. Yeah. Oh, yeah. That's hand size there. What does the other side look like? I can tell that that's one of those mirrored things. I'm trying to remember. We showed this before and one side was the Mini Jim and the other side might have been, was it Joel? I can't remember who's on the other side. Let me know who's on the other side if anyone remembers because it's been... Yeah, that's what I thought. Joel's on the other side. I did remember that correctly. Who's Joel? 3D printing nerd. Joel Telling, that guy. Sorry, when I was rebooted my contact list was removed. Got it. Then we could have some fun uploading a new one, Shannon. Yeah. This is super cool. Ethan's dad's with us tonight. Thank you so much, Ethan and Ethan's dad Marcus for this. I thought this was pretty awesome. Let's see. Another awesome AC Rogers print here. Filament February the Millenium Falcon card by FixumDude who's also with us on things. It is pretty awesome. I like it. Printed really nice and then you pop it all out and put it together and it looks super cool. Nice work. That's beautiful. I think I wonder if Chris has already printed this. He's had to, right? FixumDude, nice work on that. Awesome job. I love these card prints. These are so much fun. Great kid, don't get cocky. All right. What do we got next? Jeff Bowen. I'm going to say Bowen. This Yoshi model can be found on things. This one's up at 600% on a CR 10 and this is pretty dang sweet. Look at him on the printer. There you go. Isn't that awesome to see? I love this style scale because it shows like he printed everything on that printer when you put it together. It's like a head above the rest. A head above the rest. Where's Brian Vines when we need him? Yeah. Duit is in here from Canada. How are you doing, Duit? I'm really disappointed that there's no info on how long that took to print. Yeah. I looked through here earlier and I don't think there is. That needs to be a new role because I feel like everything that we see we ask, how long did that take? Yeah. At least two minutes. That is true. The Council of Andrews is with us. Welcome to Council of Andrews and thank you for your combined first-generation or first-generate generous $10. Yeah, the first-generation. Your first-generation. There's something in English tonight. I need to be rebooted. It's you and Geary from here out. Bye. Have you tried turning it off and on again? No. Thank you so much, the other Andrew for $10. Yeah. That was our Filament February submissions and I got to say that was some pretty cool ones. I love seeing them. I just go on Twitter and type in hashtag Filament February where everybody's posting and I grabbed a bunch of, I think, six or seven there but there's a ton of stuff being posted. There is. It's all over my feed so it's being seen and it looks great. I love that they're doing such an awesome thing with Protoposta 2 giving away just a ton of prizes and all you have to do is print something. Yep. So easy. So easy to enter. Let's see. What do we got next? We are rocking. We are cooking through this episode. It is already almost 20 after. We already did the Filament February stuff so check that out. Link in the description below. Also don't forget if you're watching on any of the other platforms we definitely appreciate anywhere you are if you have not subscribed to our HotMakes channel that'll be posted too. Please come over hook that up. We're trying to get a thousand subscribers in the next 10 episodes and like 360 something or something like that. I'm just spitballing. I can't remember. Is that what it is? We're at 42. Yeah. Andrew Osman. $10 Super sticker. Thank you so much, Andrew Osman. Council of Andrews has spoken. Thank you so much. I appreciate that. We appreciate that. Where to enter? Someone's asking where to enter. All you have to do is print something cool. We just posted a link right now to how to enter to the Filament February stuff but it's really just printing something sweet from Thangs.com Tagging it on the Twitter or the Instagram with the hashtag Filament February and at Thangs3D and they will find you. Yep. So easy, so easy and so many prizes. Yes. Thank you so much again, Andrew for that super sticker. I wish I could do that in my chair right now too. I just want to spin around. Oh, you guys forgot. I'm watching the Edge of Tech chat is where Andrew did that from and there's a animal in a chair like I'm sitting and spinning around in circles. Cursey fabrications keep up the great work guys. Hey, you too. I'm super pumped to see the Ironman content, Chris. I can't wait for that so keep it up. Thank you so much for the $10, Chris. Thank you so much. Alright, what do we got next? We're cooking. I almost forgot what we're doing here. We're doing hot makes, right? We're jumping in some more cool stuff. I love it. Ladies and gentlemen, let's do some hot makes. Let's go. So we will be careful with sound today because last week I showed some tic-tac stuff and we got hit with a copyright claim. We got hit with a copyright claim for one week. I know. Our firewall computer just be safe. Our firewall went down. It's funny because everyone's like, we can't hear it. We want to hear the music and then I play one week. I play the music and I get cut. It's okay. It was just a claim. It didn't hurt the channel or anything like that. So it was just fun. This is really sweet. So Vicki she actually sent arguments to open SCAD to that project, right? For the Wordle results. So then every time she gets the results, it turns them into STLs and she said, don't be terribly surprised if I print myself a fresh Wordle printed every morning. So let's just check out what it actually looks like. There's no sound, so we're good. This is super cool. So she gets the Wordle. She hits download 3d model. It downloads it. Oh, so cool. I mean, super cool. Very good concept. There you go. There we go. The Wordle STL generator. So check that out. Nice work, Vicki. We really appreciate the effort in that because I'm not going to lie. I don't know many people who would turn Wordles into 3D prints, but that's pretty cool. I think I'm the only person that hasn't played it yet. I have not either. My wife got into it. She's loving it. I have not either because I need to know words first. So Duit 3D Canada Canadian 1399 with a Canadian love. Thank you so much. Thank you guys so much. All right. What do we got next here? Vicki. Vicki. Nice work there. Star Wars radar. So this is Star Wars Valentine's Heart by FixumDude. Imagine that. By FixumDude and it's Star Wars. These are pretty cool. PrusaPrinters.org probably should drop them on things. Just saying Filament February, right? Here you go. We've got to check this out. What do you think of this? I like this. Listen, my head's all Star Wars focused right now. This is fun. Anything Star Wars this month throw at me and I'm good with it. I want to see you guys print it. Yeah. I don't know. You guys are so creative because I can't, I don't know. I want one that says it's a trap though. I'm looking at that one down there. I feel like Chris already has his paws on these too. I think we need one that says we need one that says I thought they smell bad. On the outside. Yes. It's a trap. Chris Perlow already printed these of course. I think he actually tagged me in them. I think it, yeah, like the first day. It was a while ago. Where can I buy that on candy? Yes. We need that on candy. You said your favorite one is it's a trap. I just saw that one down there. That's really cute. I don't know guys. I like them all. See Han Solo is my favorite though. I'm not going to lie to you. That's my PlayStation controller. That happens to be right here. Nice. Sorry. It just happened to be next to me. I don't know. I know it's pretty good too. I mean hater. Don't go solo. There you go. That's not for you. Yeah. Be mine, will you? My favorite one. Size matters not. That's awesome. Is that one on there? I just don't see it. It's on the top row. Oh man. I love that. Yeah. Be my Jedi. I love that. You're a trooper. Man, these are awesome. Nice work. Fix some dude. Chris Russell came up with the Vader hater. Nice. Nice work, Chris. I love these. I might have to jump on the bandwagon and print a bunch of these. You only have a week left. No. What am I going to get? Geary. All right. Here we go. Filament frenzy. Imagine that. So there was like a couple submitted of his. I had so many today that we had to cut down the amount of hot mix. We had just so many to do. This is bloom at your own pace. It's printed using our link there. It's printed using five matter hackers quantum PLA filaments making different colors. Printed in 0.2 layers. And let's see. Look at this. This is. I did see this earlier this week and the colors on it stood out. The first thing is just not even the transition colors but just the colors in general are just so vibrant on this filament. He is just so good with putting together colors all time. Every time you see something from Filament Frenzy the colors are just spot on. There's a really cool video of him spinning the flower and there's color changing going on further down on the thread. I just need to take this one in here. This is. That shows off the vibrant shades of that. Such a cool idea. And they're not going to die in like seven days. We're on the same page. Jinx. That was perfect timing because I was thinking this like every time I buy flowers they're so nice. And then they die. They last like three days. Exactly. Let me just check this out. Hang on. David Wilson $20 $10 for the Oreo fund. Thank you so much David. I appreciate that. We appreciate that. And I got to see David is the mastermind behind the giant Oreo. It's actually right next to me. I'm not going to say why it's right next to me it's right next to me. He sent me this. This thing is so cool. But thank you so much David. I just saw that on the PayPal. I wanted to shout you out now and not wait until the end of the show because I got impatient. I'm really bad with that. Like gifts. I'm just like I really want to tell you right now what I got you. Okay. Listen. That's me. And the prime example I was making a gift for a friend in a couple weeks and I lasted a solid 24 hours before I was just like you want to know what I'm doing. It was really bad. That's awesome. Alright let's go check out this. Is that what you were doing on Twitch this past weekend? It was the bow yes. I spoiled it like immediately for no reason. Oh I can't. There you go so it shows the color. Oh it's so pretty. That's so cool. Again I want to print with this but like I always paint my stuff and it always turns out being like a color shift paint. But Barely a solid 24 hours. You were called out. No that's so cool and I do. I love these. It's such a cool idea. I know we were tagged in two or three of these prints here and each one of them were really cool and unique and of course Phil and my friends he's sick with the colors all the time. What do we got next? Oreo Cookies What? What are you up to? 110th birthday. We hope you never stop wishing. This is an Oreo cookie ad. Oh boy. I'm not retweeting this one. Did you see that? It was a sim for Oreo. What? What did you say? You are a sim for Oreo. Yeah I love Oreo. I love Oreos. Look at the see the shot that we're watching right now. Great shot right in the milk. I'm glad that we have some great content this week. This is so good. Hey someone tagged me someone said hot makes in this and that's the only reason why I saw it. I'm not going to lie. I'm going to wind up sending you a bunch of packages now. Sponsor a show. Go back to that milk shot. Oh boy. You don't hear that very often. Family friendly. Okay. We're good. We're a demonic guy. Strange little man. This is why I'm here guys. They needed a female here. They were going to bring us in. This is pretty dang awesome. Rob Ives I believe. Let's see if I can back this up. Back it up. There we go. Check this out. Servo driven. So good. Let us know what you think. Is this hot? Let us know in the comments. It's so cute. This is really cool. Like I said, servo driven. Another idea for another suit you're coming up with. You can see his little controllers there. And it moves different parts. Oh boy. Don't challenge me to do anymore. I'm going to get so sidetracked. I got sidetracked off a goblin and went to arrow. I'm just all over the place right now. Uh oh. Awesome job. Rob Ives. Love it. I love the little servo driven triceratops. So cool. What do we got next here? Chris Travis. So this is a video. We'll have to watch the audio on I think. But this person creates like tiny hats and tiny stuff for his Ninja Turtles. Let me see if I can. I'm just trying to do this. There we go. Yeah. So little Wu-Tang CDs and you know. Look at this. A little set. Yes. Look at the little details. Look at that. I need to go back just for a second. Because I want to make sure that we give the proper credit here. This is a Dwayne Sheets toys on Instagram. Dwayne Sheets. The person who tagged it isn't the person who does this. No, I think it was Chris Travis. Yeah, Chris Travis. But look at all those sneakers. Like a little closet. A little Spider-Man action. Look at that. So good. Good. Oh boy. This is going to be awesome. All I got to say is this dude is phenomenal. He's just killing it. All those different sneakers. Four to seven days to complete a scene depending on the complexity. Oh boy. Look at how tiny the little ones with the plexiglass that's for the little people. And he's using his real-life objects. I was just going to say he's using his Evo Pop to scan the objects. And then he can 3D print them. That's cool. That's really cool. Yes. That's custom right there. Wow. And his paint skills are obviously really cool. Michael Jackson. Michael Jordan. I didn't see who the third person was. It's crazy. I don't know. This is so cool. It's super long. But there you go. I think he shows. There you go. He shows the modeling process there of the Ninja Turtle. Super awesome. The Ninja Turtle that was scanned. Yeah. It's full-size. A real one. Right out of the ooze. Mr. Turtle himself. Don't tell anybody because it was a secret. Anybody out there. Let's see if anybody got that. I don't know. I'm probably the only one that caught that. I said he was out of straight out of the ooze. Don't tell anybody because it was a secret. Let us know in the chat if you figure that out. Nice work though. Thank you Chris for shooting that over because I needed to see that. That is so cool. The level of patience and painting and modeling. 3D scanning is absolutely crazy. I think that's my favorite so far. No Jim. No. Telling your age. That is super cool. There you go. Ninja Turtle's secret of the ooze. Name of the movie. Who do we have next? Chris Perillo tagged this one. After this week's book of boba fat episode I needed to begin my training. There we go. I love it. Nice work Chris. I have not watched any of it yet. We need to jump into that. We are trying to finish Witcher first the second season of Witcher. Wait until after Tuesday because Tuesday is the finale and then you can just watch it all the way through. Nice. We probably wouldn't have got it until Tuesday at least anyway. Yeah. I got to support the watch parties for it. There you go. Nice work on this. I absolutely love it. I want you to paint it because I know you're not going to and put the lights on it and everything. You're not going to do that but I want you to. Chris, you could make this globe size and put an LED in it and put it behind your set. I like that. A background piece for your set and just put an LED and actually draw out one of those holes and throw an LED in there that changes colors and stuff. I can't paint squat, he said. Nice. All right, what do we got next? Another one, Robbibes persistence of vision and fast spinning a wire together work like kind of magic. Let me back up. Look at this. Another pretty cool I don't know what you call this invention. It's almost like a fidget spinner but it's not really. Kind of. I would just sit there and play with it. It looks like the rubber band is being spun across the wire that's going down and causing it to spin back and forth which is really cool and it gives the illusion of the full heart at the top. I like it. That's pretty cool. It's a widget gizmo. Yes. I love it. I love it from this person because it's like two things really cool this week. Pulling the strings, literally. I saw what you did there. I saw what you did there. All right. Here we go. Habitier workshop. I'm going to go with that. This is the battle angel Alita. It took a while to capture all the wasteland aesthetic and add a bit of color. Let me jump into this full screen though. There we go. Actually, I'm actually going to blow this one up because there's some really cool detail in here. Look at that. Wow. These figures. There's been a lot of figures today so far and they're all so life like. Yeah. I think you have another print. Is this resin or FVM? What was that? Is this resin or FVM? FVM. We'll have to go look. This is FVM. It is mind-blowing. I mean, it's mind-blowing in a way. Agreed. Lama says Shannon's next suit. Guys, it's goblin and then I'm done. Bring it out. Don't make it go home. I want the money to keep doing it. We can fix that. Let's go see if they commented here. It did not say. Nothing below. I don't see. Did you print it at 100%? This is 75%. Most of the masks mask and main body together and fit the base on my resin printer in two parts. It's resin printed. It's definitely resin printed. That's so cool. Everybody can paint. What is this? I cannot paint. I can't even print. What was that? You can't paint or print on Tulsa. Listen here, buddy. Everybody needs a bagel holster. Everybody. Speaking of printing. I can't print either, apparently. Check out this layer shift. Gary, make my screen giant. Let me check out this. Did yours do a fun thing like that too? That's what mine did today. That is a shift there. That's like a full... I don't even... Wow, it's like an inch. Mine did that too. I got to say. Yeah. Is it still functional? It's actually printed. It failed much after that. It failed halfway through the night. I printed three different pieces, and only the middle one shifted. Which makes no sense to me. That is funny. That's crazy. That is the secret of 3D printing. You just never know what's going to happen. Nice work on this, though. Battle Angel Elite. Super cool. Can't wait to see more from... I believe it's Habitier Workshop. It's really cool. Habitier Workshop. Like I said, I'm digging it. I'm digging the whole vibe of that print. All right. What's next? Grafite. Everyone, listen up. I made this D8 Smelter Droid in Blender, and I will share it with you on Prusa Printers. What do you think? Here you go. Oh, boy. Yes. It's terrifying, but in a good way. I know, right? I really want to take this and make it track you. So, like I said, in your living room or something, like a big version of this and Habit, like, track when you're walking by. So, it follows you. Put a motion camera in it. Yes. For security. And it, like, yeah, it just turns its head while you walk by. And then when you're not in the room, it, like, scans the room for anything else that could be walking. Yes, Grafite makes some amazing stuff. Nice work. It's on Prusa Printers, it sounds like. D8 Smelter Droid. I think, hello, I made it. Huh? What? I don't know what that means. Chris Travis. Nice work. Here we go. Completely reworked testing it now. So, this is pretty cool. Here we go. Pooch says, can I put it by my door and have it announced when people come to pay tribute? Yes. Super cool. Thanks Grafite for that. Awesome job. It's cool. It would be awesome. It's different from what we're looking at normally. I love it. It's 3D printed. Ah, it's so cool. I really think it would be awesome. No. The eyes come on and it's like following you through the... Yeah, so good. I want to motorize it. Yeah. Put it in front of the window. That would be cool. Nice work, Grafite. Gotta love that. Alright, what do we got next here? Amos. Let's see. This is why you always print with a silicone sock on your hot end. We didn't have enough of these to do a hot mess segment but this is a good hot mess here. Yeah. I thought that happened. It's very sad. I think a lot of people... If you don't have the sock on you just need to heat up and hopefully a lot of it melts off. But this is a good fail. This is like an E3D sock here. I can do that. Nice little mess on the end there. Nice work there. Hopefully everything came okay. You got that off. Or you just threw the sock away and started over. I would just throw it away. It looks like it's split there. Yeah. It's gone or now. Next. Abby Brown. Gotta love this stuff. Check out my desk organizer set. I got trays, a square and rectangular including stackable versions a pencil cup, business card holders a coaster, a magazine holder and two sizes. Look at this. Such a cool idea. What I love about this is that it doesn't matter where your desk is. It could be at work at home. You can customize this to your colors to whatever aesthetic you want. Keep the black and gold. I love this. I love it. I see what you did there. We need a version of the large one that has the offset smaller and larger sections to look like the Death Star wall. So you can print an inner white piece. That's funny that you say that because that was one of my first thoughts was that it looks like something out of Star Wars with the patterning. Abby, nice work. It looks like a critter eating the part. I'm not sure where you're pointing that. Maybe it was from the last thing. All single extrusion, she said too. That's cool. That's really cool. I love it. I love the stuff you come up with. I love... Apparently we went back too far. I love the ideas and the colors. There you go. There we go. I'm not sure why I wasn't doing that a second ago. There we go. You got to love the desk and the pictures too. You churched it up a little as they say. This is super cool. I love all the colors. I think Geary is right. We need a Death Star pattern. Black and white. The one that was being used as a coaster. The round one. It looked like the floor and the carbon freezing chamber. That one could be printed with an orange insert. Maybe make inserts with translucent filament and put orange LEDs in it. Yes. It looks big enough for a battery pack. Ooh. We like LEDs. Light it up. Light it up and motorize it. Why does it need to be motorized? I don't know. Why not? There. Mass. This is super cool. I don't think I'll ever get tired of making these. I just love them so much. Protopasta. Pretty in pink. HTPLA with quartz gems. Instead of using white for the interior, I used the new Unicorn Tears Glitter. I got to bring this up a little larger for us to see. Check that out. Now, that is cool. That's crazy. That's got to take a minute to do. Yes. Wow. I think it's a good size. There's a hand for scale, but I think this is super cool idea. Another color that Quantum, the Matterhackers Quantum, one of those colors would be super cool to see with something like this. That's crazy. What we got here. Those gems are so tiny. Here's the inside. There you go. It opens up. There's the inside of it. What do you think? Do you need a few of these laying around the house? I'm reading the comments and apparently it takes an hour and a half for the gems. I don't have the patience for that. Wow. Awesome. An hour to hour and a half to do all those gems. That's crazy. Geary, is there a faster way? No. I was thinking he could search for us, but I think thank you for being here for one. And number two, phenomenal job. I love the print. Looks great. The gems are super cool. I like the gem addition. I just wouldn't have the patience for that, but it's a very nice detail that you don't see. It's very unique. Does it say what's supposed to go in there? You can put whatever you want. What's supposed to go in there as Geary asks us? It looks like 60 hours of printing time. Nice. It looks like something rectangular, but the notches on the side are for grabbing it out somehow. I see. You mean here? I see what you're saying. Good question. What is supposed to go in here? Let us know. Inquiring minds want to know in the chat. We're all watching. Nice work though. I love it. I don't think there's anything below. But super, super cool. I don't know. I need to print some of these. Even without the gems, I think it would be printed. A commander deck. 100 double-sleeved cards. Oh, nice. Really? The lid stores two sets of dice. That's sweet. Or a bagel holster and Oreos. That's other guesses. That's awesome. The lid actually stores your dice too. That's cool. It's like a whole game. All in one. What's going on? Nose, playing cards, die, Oreo and bagels. Every game? I need to see a picture of this with the cards in it. I'm sitting here literally under my table right now. Are my normal fun, and I want to know. You just have everything right next to you. Hang on. My Han Solo So little PlayStation controller right here. And if I reach down, hang on, look, there's a baby. Like, I don't know. Everybody look under your chair for a prize. Yeah. And you get a deck of cards and you get a deck of cards. You said there's a baby and my dog went, what? I mean, I could pull a bunny out, but that's about all I got. I mean, I got a nice like storage of fun stuff down here because I don't know, I just been using it. Oh, oh, you wanna see the bunny now? I see it here. Here's the bunny. Here she comes. Don't eat that. Yeah. It's so cute. Spoiler alert, Ender3S1s, that's one of the test profiles. I have it posted on Instagram. Ooh, we'll have to check that out now. So nice work. We got off track with the random. The random presents we're like storing under our chairs and stuff. Nice work. We'll have to check out the Instagram. I really want to see everything in there together. Michael Grugel, FixumDude. Shout out to Jim and Shannon from FixumDude. $10 on PayPal. Thank you so much. Thank you so much, Michael. We appreciate that. Man, we definitely appreciate it. Everybody's donations tonight. You guys are awesome. We keep the lights on. We had to bring in the big talent with Shannon, so, you know... Oh, please. I tell you, the green room has never been so... It's all green skittles, only a certain color, water. Oreos, green ketchup. Oreos, green water. Yes. No, it's all in a blue house. Why do I have to see this video? I don't know what you're talking about. All right, what do we got next? I am not a painter. Wexter is awesome. So, Ethan's dad said, I am not a painter, but Wexter's awesome articulating job of made me do it. I'm going to pop this one open too, because why not? I would say that's pretty good for not a painter. Come on. Come on. That's definitely better than I would do. It looks great. What do you think? I like it. I find it funny that every time there's a Star Wars thing that pops up, Chris is also tagged. You guys are really entertaining with that. No, it's cool. I'm seeing a lot of these articulated... I mean, there's so many different ones now. It started with the dragon, now we're at... Maybe like a Pokemon today or something I saw going around. So it's crazy, but they're all really cool. I don't know what I'd do with them, but they're fun to look at. Naturally, you play with them and then you put them on a shelf. Well, I feel like this particular one could be like elf on the shelf and just like hide it at people's houses. You know, like just jada. What would you call that though instead of elf on the shelf? Hey, that's with us. You know what we need to do, Gary? We have another shop tour with Matt. He has such an amazing shop. He says, hey all by the way. Long time no see. Funny story for anybody that doesn't know. I should get it out. He sent me a whole Star Lord out like a cosplay outfit. Super cool. Guns. Oh, are we both going to show up to a stream on a Star Lord now? Let's do it. You have a Star Lord too? I have Star Lord and I have Nebula. Yeah. Oh my gosh. I want to see that would be funny. It would be entertaining and we'll just, we won't speak about it. It'll just happen. Let's do it. I just show up as we both show up as I could, you know, I could probably show up as Jabba right now. I'm here. I'm actually here. Nice work. I love it. Oh, yeah. Oh, sorry. We need the cosplay of Star Lord, but like keep as long curly hair coming out of the top of the helmet. Yeah. So good. So good. Oh, so good. Yeah. This is articulating someone says I assume the tail moves. Yeah. So everything from about right here down is articulating. So you can move back and forth. I believe there's no supports in this and it all prints in place too, which is super cool. Yeah. All I can think about is throwing my hair through the top of the helmet. There's a mask. All right. Be hilarious. Oh, so good. All right. What do we got next here? Shane last but not least it's alive and now on my shelf. Check this out. Yes. He started a fire and he threw like a diffuser in front of it. And this is really cool. Shane. Let us know in the chat how you did this because I think it's a sweet effect. And it's I can't tell if that's what has the sound or not, but there's some sound with it too. Looks like my electronics boards is on fire. Yeah. You know, it would be funny, right? LEDs behind a sheet of paper programmed to mock a fire. It's a question mark. Shane, let us know if you're with us, but you know, it would be funny. Like put that when we're doing an unboxing of a printer, have that behind it. And then when you plug the printer and turn it on. No, that's not as funny as smoke would be better. All right. That might confuse. That's remnants of an a net. We were, he just said that's remnants of an a net. Where there's just tripod, there's fire. Super good. Well, that's awesome guys. I got to say we saw some really cool stuff this week. What was your, what was your favorite one, Shannon? What was your favorite? What did I, the, I don't know. What did I say was my favorite? At one point I said it was my favorite. I really did like that. The one with the gems on it, just in terms of the work. That went into that. I like the flowers that were made out of the color changing filament. Yeah. The quantum. Yeah. That stuff is awesome. I need to get, I think I might have to get some. I really need to go, I really need to pull out my fill of blend. It's three colors and get some cool stuff printed. And maybe people will like freak out and be like, whoa, three colors. And I'll be like, yeah, that was, that was 2019. Come on. I mean, you're still in 2019, right? You know, sometimes I think it'll be cool to go back to 2019. Cause I, I miss, I miss going to the, all the cool shows. So we did Murph and Earth that year. And it was such a fun time. And if, if, if we can get back there, if they have a Murph, cause I, I mean, unless somebody else knows, we, we don't know. Unless somebody else knows. I think we tried to find out and we weren't sure. Right. We did. We talked about it. So if, if somebody else knows if there's dates yet or anything, let us know. Last I saw on a tweet that they were looking at June and July again, but there's nothing solid. We probably won't hear until like June or July. And then they'll tell us like, Hey, show up. There's something. Edward, thank you so much. $20 on PayPal. $10 for Oreos and $10 for, let me click on it. I, I can't see the full, um, comment until I click on it. Uh, $10 for Oreos and I believe it's $10 for Shannon. I believe it's sad. Oh God, no guys, don't do this. Yeah. Oh, Shannon, Shannon's second printer fund. That's what it was for. Yeah. So thank you so much. Thank you so much. Thank you so much, Ed. Ed, we really appreciate that. I just want to make sure I didn't miss, I didn't want to miss anything here. Um, You guys are crazy. Pretty sure, pretty sure we're going to have at least $9 for your printer fund. I know. I'm just, um, Earth, Earth is an in-person event. I hope so. Does anybody know that? For sure is Earth in person. Earth has dates. Where is it? Earth has dates out by you. Well, it's out on your side of the world at least. Um, Yeah, it's probably fine. If it's not in New York, California, it's probably fine. I'm starting a hoster fund. I don't know about that. All right. Well, I tell you what guys, we are almost out of time, but, uh, I do have to mention, don't forget, Filament February. It's super cool. Uh, all you have to do is check out the link in the description below for all the details, essentially just print something, tag it, and you might win a $50 Protopasta gift card. If you're a designer, all you have to do is add stuff to your things, um, account, and then get your peoples to go like it. So the, the follower with the most follows each day will, will win something, which is super cool because that, that means there's 28 different winners. Um, they're not going to, they're not going to duplicate any winners. So that, that was really cool. Um, what printer does Shannon want? That's a good question. What print, what, if you could have a second printer, what would you get? I don't know. I don't know the answer to this cause I haven't had to look and it's funny cause I'm making, I'm making this bow right now. And we were talking about like the belt printers. Right. So I could print like the arm of it, which is now three different pieces, but like that's, that's a whole different level of printer. So I don't know. I'd have to look at it. Well, we know some people we can probably, we know people. I don't know if you know this, but we're kind of a big deal. That's not true at all. Hey, I just, I just saw film at frenzy comment. And I don't think I saw, I don't think he saw you on earlier, but thank you for joining the show. I know it's probably super late where you are. We dig in, man. The flowers were on point today. Nice work on that. Everybody else, you guys are awesome. I know we're going a little bit late here, but I just wanted to say thank you. Gary is back. He's functioning at least 80% right now. So, you know, we'll get him going. But, you know, I appreciate it. You guys every Monday, you guys rock and roll. We had such an awesome group of people here tonight. And we showed a ton of hot makes. Yes. A ton of hot makes. There were a lot of you on today. We're going to, we're going to continue to do that. And hopefully we're going to keep bringing some new guests into pretty soon here. February is a little bit slow on the guests, but we have some coming in the pipeline. So stick around for that. That's going to be a lot of fun. Yeah. Anything else you want to say before we go, Shannon? No, I'm just, I'm, you know, enjoying this. I'm enjoying looking at your guys' prints. So keep them coming. And we have another week of film at February. So, yeah, we have a couple more weeks. Yeah. So yeah, keep them coming. Keep tagging that film at February again in the description of the video. You'll find the link for everything you need to know about that. We've been posting it all night as well. If you haven't found us on the hot makes channel, come find us on the hot makes channel. I am watching the edge of tech one as well. There's a bunch of people on there. Come find us on the hot makes channel and hit that subscribe button. If you didn't, we're trying to get to a thousand subscribers in 10 more episodes. So 10 more weeks. We're trying to make that happen. We're going to brainstorm stuff in the background. I think we're going to do a big giveaway. It'll be fun. It'll be fun. Yeah. Give it away. Give it away. I better be careful. I'll get struck again. Everybody else. Thank you guys so much for coming. We appreciate it. We will see you again next Monday. Same time, same channel. We'll find you guys everywhere. Next Monday is Valentine's Day. So we might be doing something a little different, but we'll keep you posted. You guys have a great night. Thank you for spending an hour with us and Shannon. It was a pleasure. Thank you again for being here. Thanks for having me on. All right. Thank you everybody. Have a good night. Bye.