 Hello, good morning everyone. Hi there, Aless, how are you doing? Fine. That's good. Welcome to another episode of Ask Aless. This is our December, our final one of 2023, so that's pretty exciting. And in the Northern Hemisphere in Canada, where I am, we have snow on the ground and it's a little cold, so in my short sleeve wiki-tree shirt, I've got my volcano scarf to keep me warm. We also have snow, but just one centimeter. Almost, I think. We had a lot on the weekend and then we've lost a little bit of it, but we still have snow soon and we'll probably get more, so we'll see. It's the beginning of the season, so great. So we've had some comments going as far back as on the October G to G post. We had a couple of comments on the November one after we did this and we have some for today as well, so that's great. And for anyone who is live and in the chat, please ask your questions and we will answer those as well. But it looks like we should have a good morning of questions, so hello there, Azure and Yoke and Bill and Vicki who are joining us and a few others who are on the stream, but haven't said hello yet. And welcome to everyone who's watching this after the fact. So do you have a preference of where we start? Well, let's start with October since it's the earliest. Okay, so October, on November 27th on the October post, Patty asked about, he said, I don't know if this is a question for Alessia Grig on the livecast. So one of my Saturday livecasts, I had mentioned that all of the featured profiles because it was a Thanksgiving one and all the profiles were about Mayflower, people who came over in the Mayflower and they're all really close together, like most of their connections were single digits. And so he was wondering, wouldn't it be neat to have some way of showing not just a list of how one person, the profile person is connected to all of these profiles of the week, but if we had sort of a matrix and how they're connected to each other. And he referred to it sort of how on maps you often see lists of cities across the top and the bottom and use a matrix of how far they are apart from each other. So that could be an app in fact, and David Weinberg I think has taken up the challenge and might be creating something or playing with something like that. But Alessia has an idea of, you could actually, you could build this yourself and it wouldn't take too long because you have some information anyways. You have, actually you have distances to all other featured profiles at the bottom of the screen. So you just need to visit all 13 profiles and put this in a table and you will have exactly what you're asking for. And you just navigate to another and you get then for Nancy distances to all other featured profiles here at the bottom. So it's really relatively easy to build a matrix if you need one. But maybe there will be an app for this. We'll see. So the short answer is you can do it yourself right now, but it would be fun if, you know, some people are lazy, Alessia, they're not as adventurous as you are. So I can see why some people will say that's nice, but it'd be even nicer if someone did it for me. So, but that's good. So then we can watch our three dimensional graph of connections between them and which, oh, that's a challenge for you to make the common ancestors across multiple targets profiles. Exactly. Well, you know, that occurred to me as well. You know, once we have the connections and then some of those connections are actually relative so they could have come. I know I was thinking of that. But I didn't want to say it out loud, but now I have said it out loud. Oh, look at the Patty said, yes, I'm lazy. Well, I wasn't specifically accusing you of that Patty, but, you know, okay, so let's go to that was October. That was the October question. And then in November, after the chat, we got what, two more questions. I think so, yeah. So Alan, we answered a bunch of Alan's question and then Greg, on November 22, Greg had a question here. And he says, when I run a search, and he gives a search there, I get a bunch of hits, but they don't seem to be sorted in any way that I can understand. Clearly, they're not sorted by last name, birth date, branch status. All the results, if you don't specify the sort order, they are sorted by creation date. Oh, and you don't see the creation date anywhere in that? No, you don't. But I mean behind the common identifier for all data is user ID. And that's a number that is based on creation date. So default order, if not specified, otherwise is creation date. There we go. Okay. Now, if you want, but you can, of course, on the wiki 3 plus, when you search, you can specify a different sort order right here, sorted by. So here we have a few fields that can be used for sort ordering. You know what? My eyes go right by that. I didn't even notice that. Drop down. There we go. Okay. But the answer to the question was actually... Is there a way to, is there a way to force them to sort? So this is interesting for connectors because they want to kind of, he wanted to sort by these three ID that appears on some profiles. So that's a group of people that are connected to each other, but not to the global tree. So you have here one of the possibilities. You can use the grouping here at the bottom below the table. And one of the possibilities is connected. Okay. This will perform a grouping on the connected field. And now we got first 72 items are unconnected. And here are a sample of first five profiles. And the three dots at the end where you can... Can you? No, you can't. Yeah, I thought it's possible to click it there, but maybe... No, not in this case. On other groupings, it is possible to display all, but here not because this one is done specially. Then you have far more profiles that are connected, that are actually connected to the public tree, to the tree, but through the private connections. So these are all separately here. And then there are all the trees that you, all the profiles that you wanted to connect are listed further on. And here you have, for instance, unconnected. 86, that's the size of a group of people that is in this tree. And also you have a link to the tree. So if you click it, you get all the profiles that are connected to each other, but not to the global tree. So you can then here select a person where you will start to branch out towards to find the connection. And also here, and then you have a field count where is the number of profiles that are... The number of profiles that were found by this search and connected notables five stars that are in this tree. So three profiles, these three profiles are connected to each other in this small tree, but not to the global tree. So connecting one of them will actually connect all three of them. Okay. So the tree itself has 86 profiles, but only three of those profiles satisfy the notables five stars? Yeah, were a result of this. Right. Okay. And you can then sort this by whatever you want, by each column. But okay, basically the point is to get this grouped tree first to start here because you will connect more profiles. Right. Yes. Okay, that makes sense. Good. Okay. I think that answers Greg's question. That was one of the November questions. There was a one underneath that about the Barbados sticker. What was this about? It says, hello, Elash. The sticker for Barbados was created earlier. I would like to track progress. What search do I run to check how many profiles have the sticker? Well, all templates have attached the parameter analysis on the profiles. So it is all on all template pages. So this is the page of the template. You have here a grid and one of the cells is parameter usage stats. And here you can get for each profile, how it is used on profiles. So here we can see that profile is used 1200 times and 1189 is just the Barbados sticker. And with ancestry parameter is used 60 times. Oh, neat. So here you can see how any proof, any template is used. Now here in preview, you get some grouping of the parameters and you can also see each parameters analyzed separately. Now here we don't have, here there is not much to see. So let's go, for instance, to England sticker. Okay. Now where this parameter usage, oh, okay, it's still being produced for this week. Let's go to last week. Wow. So here the sticker is used 300,000 times and here you have all usages and the number in the right how many times it was used like this. Then you can go, then here this sticker has two parameters. One is country, one location. So county, if you can check the county parameter and here are all different usages of county parameter. Now this is a new thing. If the parameter has a list of associated with it. So list means, let's go back. That's here at the bottom. If the possible values of the parameter are listed, then this, those are marked as bold, those items are bolded. So you can see here 6,000 times for this one. And these are the typos that happened. Now, just this week, I also, the England sticker, I added this typos as a suggestion. So they have 2,000 suggestions to correct. Oh, no. Or such typos. Yeah, because those are typos, right? Yeah. Yeah, mostly a typos or incorrect usage because here probably in some places, the place is listed in the column for county, which is wrong. It should be to separate parameters. So they will probably correct this one. And then you can also see the location column, how, what is parameter, what is used in that one. But here there are no rules of what is correct or not. You can just see that approximately 100,000 templates use this column that are listed below and 230,000 are empty. So this end on the preview one. Okay, here just one. Here the up to three preferred parameters are listed. So here only one is preferred. Oh, okay. So, and this is done for all, for all templates. So this is, for instance, it's interesting for, if you check, find the grave. Oh, yeah. So last week. This is Tuesday. So I just posted the new, this week's half an hour ago. Now here, where there are number parameters, I usually mask the number as digits, letters. So these groupings have some sense. So for instance, if we check the memorial column, you can see, so the spikes are here 900,000 times is used like this. So that's one, four, eight, nine, nine, nine digit number. Okay. And there should be eight digits also has even more, I think, four, eight. Yeah, it's 1.2 million times. And the rest are type was probably with here we can see a dash in between or forward slash name. All these that are not in the correct form are reported as suggestions so they can be corrected. But you get, you can get everything as a parameter and the same as, okay, we have n and zero and no, but no, no. I really mean no. It is interesting here to analyze how parameter is used of the template. So we can see no was used 100,000 times and yes, a bit more 110 and 2 million template usages are empty. Right. Okay. And I know that only three people made typos. Yeah, they are getting corrected because if you make a typo, there is a suggestion for it. Okay. So it's okay. Yeah. So usually this, this, this typos was, were most likely recently done. So that's a doctor's do tend to these suggestions and right. Yeah. Keep the number low. Okay. That's about templates. Good. Well, that's neat. So Patty, when you were talking about sorting and you're also the, the wiki tree number, Patty just reminded people that so that there's, there's two, like there's the wiki tree name, which is a name dash and then a number afterwards like Clark dot that 11007. But the number that you talked about, you can get that if you mouse over the wiki tree ID and see it in the status bar. Here at the bottom, I'm going to hide his comment so you can show people what he means by that. So like this. So here at the bottom here, here at the bottom, the link will appear there at the bottom. I had to move, I had to move our pictures so you could actually see now. It's pretty tiny. So you, people who are watching can't actually read the text, the number down there probably, unless you use your binoculars. But there's the ingredients. I can three to seven, eight, four, four, eight. No, but I did read it on the video. Yeah, that's right. You should just enlarge your video. That's what he means. Yeah. And that's, that's helpful to know. Sometimes in the app developers, I need to use that number to track. Well, you get that number also here. If you go to on edit, hover on edit on wiki tree, you can see at the bottom, the also the user ID, or if I click on the edit button, it's part of the URL. Oh, up top. There it is. Yeah. Or if you use wiki tree browser extension, you get here user ID is added to the scissors. And you can just copy user ID. That, that, there used to only be three things and with this. Yeah. Without the extension there. But I added this because I use I often need the user ID for challenges and all over the place. So I added this to the scissors. So it's easy for me to copy it. Nice. Nice. Okay. So where were we, which version of it were you using so that, okay, we want your screen as big as possible. So here we are. Tiny me over here. Okay, I think that covers November. So let's see and this month. Okay, we messed up the time and date. Wednesday wasn't going to work for a lash. So we threw around a few different things, but we came to this one. And Patty, we got your question. And yes, he did say he wanted automated because he was lazy, but that's okay. Someone will work on that Patty. Is it possible? Yoke has a question. Is it possible to use wiki tree plus to search for profiles that have or haven't an image or a photo attached? No, I'm guessing she means profile picture. Yeah. No. Oh, in the moment. I do have some info for images, but there were no requests to actually search by that. That's too bad. Because now we have a suggestion. If there is an image, there is a link to an image that doesn't exist. This was read a few months ago. So those profiles with links to an existing images can be found and corrected. But there were no requests to search by that. I also, I mean, it's a profile photo attached is a very generic term because it just means that it has photos. A photo then can be the profile photo, background photo, or just one of the photos attached to a profile. So I don't have information for all the images. I think the the icon photo is imported, but I'm not sure. I also don't see a real use of this because, I mean, if you have a person's image, you will surely edit. And if you don't have an image, there's nothing much you can do. Yeah, I suppose. Yeah. Well, I'm thinking, like, for myself, if I have a fan chart of it's nice, if there is a profile picked added, then their picture gets added to the fan chart by default. Otherwise, you get the standard silhouette. And it'd be nice to be able to sort of pull up that list of the ones that just have the silhouettes. Yes, but most likely you don't have the images of people born in 17th century. That's right. There's a limit to how far back you can actually go. Unless they were not of us that someone drew them. Yeah. Yeah. Yeah. And Yoko is, she's specifying, it's not that she wants to know what the image is, just whether there is one or there isn't one. So like a true, false or a yes. No, I don't think that's, I don't have that. And I don't think I will. Now, I have a related question I'm wondering about is, a couple of times when I was doing profiles of the week on the Saturday livecast, I'd open up a profile page and in the middle of it, there'd be like the image unknown icon, because the image that used to be embedded in there either got moved or got deleted somehow. So I don't, is that something that Wikitree Plus can pull up or is that a suggestion now that people can fix? I didn't know that's even possible. Yeah. A couple of times when I discovered that other Wikitreers have gone back and fixed it, but it happens if you have an image and you've embedded it as part of your bio. Yeah. So and then the image, something, something, the image gets deleted somehow or moved. I mean, it can't get deleted if it's on your PR profile. It can get deleted if it was originally somewhere else. Yes. And I think just used on this profile. And then the privacy setting of that space, space page, for instance, went to unlisted or private. In that case, I think the image disappears. Yes. I could look into it if this would be possible to find such cases, but I didn't actually see one until now, although it's possible that I have, I'm using, I have CISO pride, so I don't think it's hidden for me. Right. Yes. You could probably see everything anyways. I have that trouble too when I'm testing apps. I think everything is working perfectly. What's people talking about? Then you should, you log out and it does. Yeah, I need to. Well, if you will run across such an example, such a profile, you should give me a profile example so I can look into it explicitly. Yeah. And if anyone else who's watching this, either in the chat live or after the fact, if you find a profile that has an image missing in the middle of it, and you can see just that image question marker, that blank spot, yes, please let Alessno send them a message on G2G or Discord or whatever because that would be helpful because I've run a few times, not a lot. Most of those times people patched it up. So it's even if I went back to find that livecast, it's not there. It's going to be broken. But I know I've seen it a few times and that would be a helpful suggestion if it's something that could be framed as a suggestion somehow. I don't know. Yeah, yeah, because people usually the profile manager most likely have no idea that the image is missing. Yeah, and I think you're right. It used to be there. It was probably something they copied from another link like, yeah, another profile page or something, a free space page. Yeah. Jay has a question related to the ID number. Does it stay the same when the last name at birth changes? No. Okay, so if you change the last name at birth, the new user ID is created and the existing profile is merged into the new one. It's similar to merging two profiles. Right. Okay. So if you use the old one, does it automatically switches you to the new one? Yeah, okay. Yeah, all the links are redirected and all the internal references to the profile are corrected at the merge. So it shouldn't be, nothing should break because of this, but it is a different ID. So the suggestions do break. If you mark some suggestion for a profile as false suggestions and you change the last name at birth, it will reappear. So, but it's also possible. I mean, if you change the last name, then you most likely changed quite a few things on the profile and maybe the suggestion is no longer may not be false or whatever. That's right. So Vicky has a question related to our talk about broken links. If there's a broken link to a picture, would it show not show up as a broken link suggestion? The suggestions that are created are only for the images used in the bio. So for instance, if this image here will disappear and I would get here a question mark on the link and that it doesn't exist and that will be reported as a suggestion. So we can actually find such an example if you go to Wikipedia. So these are the latest suggestions and it should be in the links section. DNA links. Okay. Here we are missing image. So let's check. Okay. So here they are here. This image is missing on a lot of profile. So and let's check the profile now. Okay. And here we see image. This image should be displayed here in this sticker but it's not. I don't know why but this image no longer exists. Okay. It was on profile, on this profile at some point in the history. Right. So but it was maybe deleted or I don't know what something happened to the image but it no longer exists. And it broke the display all of this profile. So this is something the manager should tend to. Right. So you've got the logic there to look for broken links for images. Yeah. Well, this is in the bio part. So the bio part. Yeah. But that's because it's not should be this one is implemented differently. But I think it could also be validated. So the ones I was talking about were ones that were actually in the bio not inside the template but just in the like in between two paragraphs for example. Oh, those are reported as those are reported then. If you find here an example where there's only one for instance. Okay. Maybe this one. This is then not part of the sticker usually. So here should be one missing image. I don't know which one but I know where there is a missing image. Oh, actually there is a name. I could probably search for the name. Okay. Fine. Okay. Here is missing. Okay. So it does show up in the report there. Yeah. But the profile picture if that's missing that may not have profile and background image. Those are not checked. Okay. So I didn't I didn't know that the profile that it's even possible that the profile image was missing. Yeah. So you can just un-set it. Yeah. The one I was talking about was the one embedded in the file. Okay. I wasn't thinking of those ones. I was thinking like inside it like in between two both are checked. Okay. So this is just all in these suggestions. There are just 5,897 cases like 5,000. Only. But some are easier to correct since they are all part of a sticker or something like that. To go back to Yoko's question Patty has a comment again. And now again he's telling I mean he's hard on himself. He's calling himself lazy again. Lots of images in my offline tree which have been too lazy to upload to WikiTree. So it'd be helpful if I could list profiles on my watch list which don't have images on WikiTree. So like for if they're direct ancestors opening up the fan chart is a really quick and fast way to see which ones don't have images profile pictures. And then he will take a box and search over a thousand pictures for that person. Though if your watch list is mostly relatives Patty in the new app that I've developed and released this week the super big family tree you could just create a family tree with lots you know with all the branches filled and the profile. Isn't there on an app that lists images? What's that oh there is the there is the images app tree app but they they just sort of a they appear rent well not yeah there's no order to them and there's it's not the listed underneath them with the profile. So if you click on an image it'll go to that profile but it's sort of the opposite it's the ones that lack the images that he's it's the family portraits yeah okay they just list the images no but there where you get have a table oh which one is not portraits one family maybe this one nope this is not what I was buy or check maybe do we have you know couples descendants the portraits list list portraits you've found but you know it's not that gives you the your x x chromosome chromosome yeah I don't know hmm so you're thinking one that has a table oh well the cc7 has a table okay is that the one you're thinking maybe maybe so if you go to that oh does it have like a mini image beside each person's name wait we have a privacy image home what is this that family shit there isn't a column for there isn't a column for profile pic or not if there is oh but look here we have an image here no this is something else yes okay well here it would be easy to just display the image if there is a suggestion for the cc7 app yeah picture for a picture picture of a profile whether it exists or not yep well yeah and then since most people's watch list is heavily connected to their cc7 that would solve a good chunk of it anyways hmm okay so if uh someone's uh ian or real real or david are watching or murray there's a there's a suggestion for you yet one more thing to add to the cc7 app which is amazing okay so there's the family portraits so that shows you the portraits you have yep listed 20 you're getting double duty no that's some back i think oh no but now it works okay so i suppose you could do go to the family portraits and see which ones are you missing you know i don't i don't see my great-grandmother there oh okay now moving on that's gilesh oh okay uh i wish to completely remove so this is a question from alan again from i was completely removed my watch list entries but i'm led to believe that i cannot be a profile manager and not have that profile on my watch list uh right so if you're a profile manager for um for a pro if you're a profile manager you that's automatically added to your watch list you can't remove it in an effort to reduce the size my watchers have tried several methods by replacing myself yeah okay so that is correct uh if you are a manager it is automatically also on your watch list so yeah you cannot exclude the managed profiles from your watch list watch list can just have additional profiles where you are just interested that you are interested in them but don't want to manage them okay so this is about the reduction of watch list um this is uh not very uh supported a lot by wikid3 plus it has to be done mostly manually um uh i do occasionally prepares um a list of profiles and we have we actually also helps help some users that need to remove thousands of profiles from their watch list we do that is a sipsops and um we prepare a list of the profiles to remove and they remove actually remove them from their managed list but um that we are doing that if we are talking about thousands of profiles not a few hundred um i i think there is an um i think there's an ability in one of the extensions to reduce to remove people from your watch list okay and uh i haven't used it myself and i've just asked murria a quick question if he's online if you're in or if there's someone else knows so you can hear it you can prepare a spreadsheet of the profiles you manage for instance if we uh check the user id copy so on wikid3 plus you can search for mana gear equals so not in the suggestion part we can in the search um so we get 7300 profiles that are managed by this person and you can then uh export those to excel for instance okay it is exporting it is done and then if we open it so here you can get the excel for those only 5000 are shown okay let's correct that since you have um i think up to 10 000 can be exported to the excel um on one page um yeah 1.2 megabytes okay this one we don't need and this one uh where is it here yeah now we have 7300 profiles so here all the profiles that are managed by uh are exported and i think you have a column all managers so here we can see all profiles that are all managers of each profile so if there is um somewhere there are other managers on the but it doesn't seems to be their most itself managed by him right um so as long as he's as long as he's a manager for the profile he can't get rid of that from his watch list no yeah so here we have an example where there are two managers of a profile it's listed like that we can actually sort by this column um right that uh sort of sending extent okay so um where is the man i lost the column all managers there it is uh huh okay so it's um only six profiles are have other managers on them uh huh and oh no there are a few more at the end of the list so this profile he can give up if he wants for others he's the only manager but uh profile does not as necessary require a manager it can be orphan it could be orphan right yes yeah if it's from if it's an older one if it's private right then it's sure it can't be i opened it a few times actually what do we have now murray just answered my question he's he's live in discord helping me he said that the wiki tree b extension um does have a new feature they've added that there's an if you are a profile manager there's an x that shows up in that information box that you can click on to remove yourself to automatically remove yourself as the profile manager so you can go through profiles that way to quickly remove yourself as the manager now i went to look if there is a if there is a some keyword about managers but nothing useful for this case but still if you if uh if one if you want to uh it's not really necessary to be manager of a profile because you can for if you want to search for profiles you create it so you can use create it uh something like death i think uh actually he just corrected me i miss spoke it's not the wiki tree b it's the wiki tree browser extension itself the official wiki tree browser extension my mistake the usability so we can uh oh i'm a creator uh i have this creator and this will return our all the profiles that were created by this person oh not in excel let's go back to html so these are the profiles that were created and now we can add uh not mana girl equals come on really bugging me it's fading out it's fading that's wild now the chrome my is kind of sluggish well can i let me share my screen and i'll show how another way of doing that with the wiki tree browser extension okay uh let's see so now this isn't using a wiki tree plus so i'm kind of veering away from the topic of our video but another way to reduce your watch list is to as we mentioned to remove yourself as a profile manager so i went to my watch list here so you just go under my wiki tree choose watch list and and it loads up and i just picked um the i just picked the second person on the list lauren adam and i don't recognize her name so i know she's not a direct um this uh descendant or ancestor but apparently she's my second cousin six times removed and somehow i am her profile manager um now wiki the wiki tree browser extension which i have installed has now added this little x here so i can quickly and easily um remove myself as the manager of this process i just have a double click on that and now she is no i'm no longer the profile manager but i visited her page made sure that this is the person i don't uh i don't want to be following anymore um before i did that so uh and the way i got that was i went up to the corner here and i can't i can zoom in on the page but it's not going to zoom in this stuff on the top up here to customize the wiki tree browser extension i click on that icon it brings up all of the options under other and under usability tweaks so this is a brand new option that's just that's just been added and it's not been turned on by default but i just turned it on now and there's a button there that says under profile add a button to your profile pages to remove yourself as manager that's what i turned on by default it's off so you have to click it on and then once you've done that then it it saves automatically and now if i if i go to the next person i load up joseph's page see there's the the x is there i double click on that again this is someone who's distantly related to me i don't need to necessarily be the profile manager for this person anymore i double click and i've been removed so that's one way to go through your watch list it's not automatically it's not quite as quick as having a whole spreadsheet and just checking off boxes but i think it's actually a safer way because then you actually can check each one and make sure that we do it it's still going to be a bit time consuming but it's one way um okay back to you a lesh have you got your screens working well i'm not sure if it's working or the crash uh i don't know crumb is kind of sluggish but if i restart the crumb i will go offline so oh okay i don't really want to do that unless necessary okay um well let's see can we answer any other questions i can always share my screen and you could talk me through stuff if you wanted uh oh the only other question we have is from azure and she said would it be would it help with the wikii plus maps showing a plethora of cemeteries remember how whenever you turn on cemeteries it's just black um if it waits to display the detail of the listing of the cemeteries until down to the county level or at least for your usa and canada for example since they're so tightly clustered uh since they're grouped by that entity level for example lanark county ontario cemeteries instead just show a count of the cemeteries by the entity level so she's just offering a suggestion on the mapping and how when you turn on the cemeteries map it's just okay i will show this is the example how you can search for profiles that you created bar but are no longer managed by you okay you can uh search for creator and your victory id and not manager this the same id uh and here are 900 profiles that were created by and and whistle yeah in german it would be yeah how would you pronounce it in german now seation uh but are no longer managed by the person now to wikii plus mm-hmm ah just die oh no i will have to terminate to restart the chrome i think okay so that means we'll be seeing you in a few minutes what the hell is this is this a sign we need to bring our december one oh nope there we go nope you're still here a lesh oh i spoke too soon a lesh is gone okay then um hi there folks uh while we're waiting for lesh to show up let's see if i can um are there any other questions in the chat uh so jay was talking about using the bulk tool to remove yourself as manager so yeah there is that and where uh jay can you remind us quickly where to find that bulk tool in case people are wondering i have i don't use it or i haven't used it so it's um that's why i don't have i use the tool after challenges yeah makes sense and a lesh is back okay i'm back okay is your chrome back as well uh yeah i mean it's running now screen entire screen the right one okay okay so maps yes not not the google ones no not the google maps all right it's plus wiki 3 so the question was about what the one place that this no no uh it was about cemeteries actually she was okay the one place studies i did remove the cemeteries from one place oh you did all right after last month's session so now you can only see the one play actual one place studies um in the region okay um on the cemeteries okay let's hold yes that's we get this massive yeah yeah i mean it's a lot of cemetery also quite a lot to the to my server to process but i do have the detail level is just a circle uh maybe i can even change it to a simple dot but on the other hand if you are looking at another country at some other country you need to display a lot of profile all the cemeteries in such scale so yeah i could probably i will probably at some point reduce the number of profiles but uh the number of cemeteries displayed but since it should work everywhere not just in us it's hard to preset the density that's for sure yeah based on the density also the density is very different here i mean um it does change the appearance does change and the information displays does change depending on the scale right but it's done so that on the most dense areas it's still okay so i can't do different for us right yeah and again then if you are if you are doing coloring by parent for instance uh or by grandparent um you need to display all right cemeteries in england or in a bigger region so um it's not that you can okay that's very cool that is very cool yeah there are circle okay here we have one that goes from texas oh yeah okay the south maybe a mistake yeah that's a typo yeah yeah it actually surprised me though in that map there's a there is a sort of um i don't know if it's the rockies or what is it like there's a there's a dead patch in beach um here in the in the like next to california not the ocean side of california the other side of california yeah here it's a cemetery park and so i don't think here the population is so so dense your cemetery it's not that big is it i think it is here somewhere should be oh wow that's in nevada that's oh actually uh and your cemeteries here that's nevada that's actually desert who will live there oh okay wow i didn't realize the desert was that that big well i don't know how big the desert is i'm not from there but there's not a lot of around las vegas there isn't much okay just in the middle of nowhere well desert that big there could be people buried we just don't know wow okay um yeah but it's interesting how west uh eastern part of us is much much more denser it's like i don't know populated or uh cemeterized yeah yeah because i would have expected all of the states to be just as as solid but you know interesting no they are not and you can also color by parents so here the uh the cemetery is in the same county other right groups together and here you can then see that something is wrong now it looks more like constellations in the sky yeah it does so i have but it's very little overlap here yeah it shouldn't be with and there shouldn't be yeah that's good very cool well i love the maps uh all the stuff you do we have a few minutes left before um my granddaughter comes and uh i have to leave so did you have a quick update on things that you have added over the last month do you want to share i have no idea what i added so this is the i don't think there were any i think significant yeah okay i did change the validation for the sticker um template i added i improved a template reports that i showed already at the beginning i also did some additional checking of the for the locations of the places nice so the location table was updated a few times um i also adjusted the algorithm to locate uh profiles location since there were some uh if there it was if the location wasn't entered uh in exactly defined way it it found the wrong leads for instance the wrong leads yes um and so on so i did just the algorithm and i think the the found matches now better that's good um okay removed cemeteries from one place study page maps and that was it this month okay well it was a busy month um with november i i i also removed here in the maps uh when you are displaying uh cemeteries for instance you can also display errors on cemeteries the one category errors where there is something not defined and so on um um but uh i and now i did the exclusion of the um now if you go closer we'll get what exactly is the problem so naming convention but if the suggestion for the category was marked as false it's not displayed so it's hidden from the map oh good uh so you get actually only the ones that are wrong that was one of the changes um for astro hungary also nice category detail display i have no uh probably let's go to the plus again um and if you search for a category uh huh okay here i think i added it uh huh here i added this uh editing i think editing section was added okay and if you select here is what here you can select what is displayed on the right uh in the right part of the table for category search okay and uh one of the possibilities uh so for the default one is stats that you are probably used to when you get a number of profiles in the category and so on you can also select editing then you see who was the last editor of the category and when it was last edited nice how many times it was displayed if it's top place level the size of the contents of the category and this is the size without the parent categories so here we see these are and these these categories have absolutely no content except the parent category right um this um this is also something i didn't really show often so maybe we can you can also display the aka status of the page so if it has pages in different language uh and so on so if you are reviewing something about language structures this can be helpful three cemetery required what is that uh no i don't know and then uh you can here display the the information from the category info box boxes of the category so let's go to some cemetery okay um this would make more sense and um so this now so here this this place uh okay these three should be cib most likely i just probably erase the contents uh so this is the uh uh required fields so coordinate find the grave id parent id parent and name then you can list preferred parameters of the uh template so here location is mostly entered others are as they are then also you can display other uh the rest of the parameters um that are entered on each category uh links so these are links uh i mean they're all actually you can list check all that amazing yeah of the uh cemetery and see their status that's really helpful it's great okay the images are not used and if it's not in a template so this part is not this is as a fixed content of the page okay cool um azure has um we were talking about watch list before and someone said you could there was another place you could change your watch list and she's given us the link to find that under watch list another place another way to do that yeah there were many ways to manage watch list because it's a problem once it gets big exactly yes and i need to go through and call mine as well so uh i will do that but but now i'm afraid it is time to okay i think yeah we did the new yeah well thank you very much a lot of questions and everything else i think we got through all the questions i don't think i don't think we left any here um like and subscribe hit the like button um azure mentioned that earlier so we got to do that so thank you for reminding us because i don't always remember to suggest that but yes please do um thank you alash for a wonderful year with wiki tree plus and we're coming back again in january right we're going to keep on doing this yeah okay when it's on wednesday so on third on the third january okay nine o'clock eastern time uh what's the utc the same as this time the same as this time okay if you made it on time this time it's the same time just on january third usually i just i express the time in see you in two hours you know in a few minutes but it'll um unless something else has come up it will be the first wednesday of every month um unless there's something special happening and we have to adjust things but we will try and make that g to g post accurate or it will become accurate eventually well we don't we never change the time so time is the same the time is the same the day may have to have changed because of schedules but anyways thank you i thank you again alash thanks everyone who was who were watching live thanks everyone who was watching after the fact and who've helped in the background with questions and whatnot um have a great holiday season and we'll see you in the new year take care bye bye