 Γεια σας, είναι Vicky here και καλώς υπάρχει στον εμπορία μου, που διδίω τα 10 καρδιά χρησιμοποχή χρησιμοποχή. Και εδώ είναι η Γινζέρ, η μου καρδιά μου, που είναι πρακτικά σχετικά κομμάτωτας της καρδιάς που χρησιμοποχή, μεταφέρνω να την ανοίξω, για να μπορείς να χρησιμοποιήσει το λόλι-ποπ. Φυσικά, δεν θα χρησιμοποιήσω το λόλι-ποπ γιατί δεν θέλω να δώσει σούγρα, αλλά μπορεί να παίρνει με αυτό για την ημέρα, για να παίρνει όλα τον σώνο. Και θα δούμε ένα λίγο δοκιμάδι για το τι είναι στην κομμάτωτα. Πρώτα απ' όλα έχετε αυτό το λόλι-ποπ της αχαίτης, έχετε και ένα κομμάτι της καρδιάς στον σύλβερο. Αυτές δεν είναι σύκονοι, δεν έχουν κομμάτι στον κέντρο. Έχετε και ένα μικίνι νέο, που είναι αδωράμιο, έγινε πολλές μου καρδιά μου χρησιμοποχή. Εδώ είναι ένα φόμ ταπ, που είναι πολύ σύνο, καλό για τα χαρδιά σου. Έχετε και αυτό το σύμβερο σύμβερο στον σύλβερο. Έχετε και ένα 6x6 πακ της παππέρας. Έχουν όλοι δύσκολο, και έχουν ένα καλό κομμό, πολύ καλό για τα χαρδιά σου. Έχετε και 4 δύσκολες χαρδιά. Και εδώ είναι τα χαρδιά σου. Και επειδή θέλω να κάνω 10 χαρδιά από αυτή την κομμάτωτα, θα πω ένα more, που θα είναι καλό. Έχω να κομμάσω όλα αυτά στον κέντρο και θα τα σκοτήσω. Και θα asking, 4ταιστά τους ε scrap. Για my first card! Θα καλά να μενοoger patio. και θα χειunes ε камοι παμε ντορώ και ε οποιοταν χäseptε λεφ encapsανω να έχουνχα πολύBa very small designs. So, i'm going to use myls i'syxMacinh and I will end up having 3 Andyάλins all different designs. I'am going to put those to one side and I'm going to work on my background. For that,吧, iAe going for a very spl shit body look. So, i'm going to use my oxide inks and here κομμάτρες εδώ, θα προσπαθήσω them with water και then apply my paper on top. Θα ανοίξω να ανοίξω το πρώτο λαό και then I'm going to repeat the same process. So again, I'm smooshing the paper on top of the splashes there. Θα ανοίξω αυτό το λαό as well and I will go ahead and add a little bit of Distress Oxide ink directly with a blending tool, just to make it a little bit more vibrant. The colors I used were Cractive Stasio and Broken China so here I'm happy with how my background is looking and it's time to stamp the sentiment. I'm using black ink to stamp the sentiment and with my MISTI I'm able to stamp again and again on top until I have a nice and crisp sentiment. I went with the one that says Bikinis are like fries, you can't have just one. I used tiny little foam squares at the back of my bikinis but I'm going to stick them in a row on top of my panel. I'm going to stick this panel on top of a white card base and just to finish it off I'm going to use some of the confetti from the kit and I'm going to stick them in different areas with my Matte Medium Glue. To move the little sequence here and there or the little confetti here and there I'm just using one of those pencils that are used in nail art to pick up the gems for the nails. Now these are totally inexpensive and they are great for picking up little elements just like I'm doing here. And that's card number one for today. For this card I'm going to use these two ink cubes. One is slightly darker than the other and I'm going to use both to stamp the sentiment. This way I will have an ombre look where the top is yellow and the bottom of the sentiment is almost orange. So I'm stamping only the top here and now I'm going to move on to the darker ink cube. I'm going to add ink only at the bottom slightly overlapping the top part. Now I'm working on a panel that I have cut out from pattern paper from the same kit that looks like white wood. Now I'm going to put my bikini dies on top decide where I want them to be. I'm going to secure them with some tape. I run them through my die cutting machine and as I'm removing everything I'm making sure that I keep up all the tiny little pieces so I don't lose them since I need to stick them back. Now I'm going to add some acetate at the back and that's why I'm using this acetate from the kit. I'm not going for a shaker card but you will see what I'm going for in a bit. So I'm adding some tape adhesive at the back I'm going to stick my acetate on top and now I have an area where I can stick all those inside pieces so that I get that bikini look again. Now my bikini looks nice at the moment so I will go ahead and work on my backing piece so this is just a piece of scrap paper that I'm covering up with double sided tape and the idea here is to make sure that this panel is big enough to put at the back and cover up all the holes of my bikini. Now I'm going to make sure that the adhesive is nicely stuck there I'm going to peel it off and I'm going to use my glitter This is actually by Novo and it's called Glimmer Dust It's really pretty It's very fine glitter and once it's stuck on top of the tape adhesive it doesn't move at all. Just to make sure that this is nicely stuck there you need to rub it with your bone folder and this is one of my favorite techniques to create my very own glitter paper Now I'm going to add tape adhesive at the back again and I'm going to stick that directly on top of this glitter paper so you see that I have locked that glitter at the back with acetate on top so no matter what it's not going to move it's not going to stick anywhere and it actually gives the card this wow factor where the recipient won't be able to tell how you made this card and this is a great example on how you can use the negative space of these dies For the third card I'm going to use this gorgeous patterned paper I'm going to use a rectangle die to cut out a panel and this is slightly smaller than standard card I used one of the circle dies to create a hole there and then I'm going to use two of those to create a ring and as you can tell I am going for a shaker card Now I'm going to stick the ring and this is going to give a nice finished look and I actually used the patterned papers that are different color but same design and at the back I'm going to add some tape adhesive and then stick the rest of the acetate that I was included in the kit and this way I have the window ready to go Now I'm going to work directly on top of my card base and I'm using the white card base for that I'm going to stamp the sentiment at the center but just to make sure that this is nicely aligned with the window I'm going to place that on top of that window close the door of my misty Now I know that my sentiment is perfectly aligned and it's going to show through the window and for stamping the sentiment I'm using three different ink cubes from light yellow to mid yellow and orange and I'm making sure that I blend all those three colors directly on top of my stamp and the idea here is to have a shaker window with the sentiment inside the window A very simple card basic window design but by using different ink colors and beautiful patterned papers just like I did here it's taking the card into a different level so I added the confetti inside and my card is ready Now I like both these sides but I had to sacrifice the one with the strips for this gorgeous sunset Now I'm going to use this rectangle die to cut out a panel and then I'm going to stamp the sentiment on velum I stamped my sentiment with VersaMarking and now I'm going to apply white embossing powder I'm going to use my heat gun to make sure that I hit set the embossing powder and now I'm also going to use my paper trimmer and trim off the edges from this velum strip as I want this strip to be as thin as possible so that it doesn't cover up most of my gorgeous patterned paper Now I'm going to stick that on top by just wrapping it on top and at the bottom of my panel and for that I used some tape adhesive so that it's going to stay put Now just because I used my heat gun you can see that it's warping a little bit so it stands on top but you can do later on For now I'm going to stamp some of those bears that are available in the stamp set they are actually in three different sizes and I'm going to stamp them with black ink as if they are flying away at my sky and now I'm going to use some glue dots at the back and I'm going to hide it just behind those letters so this way the velum is going to stay flat on top of my paper and all that's left to do is to stick this panel on top of my card base a very simple card but really gorgeous Now let's move on to the next card I'm working on white piece of paper and that's actually watercolour paper and I'm going to cut out a circle just a little bit offset from this panel to make it look more interesting but at the same time I want to make sure that I leave enough space for my sentiment to fit in and I will go with a sentiment that says so I have cut it out with my die cutting machine and I'm just drawing a line using the same die just outside that circle so now I'm going to use one of those bikinis that were included in the stamp set and I'm going to go all around that circle and I'm making sure that I align the bottom of my bikini with that pencil line that I drew just a little bit earlier Now I have cut out this panel by using my rectangle dies that have a little bit of stitching all around and that's why I wanted to keep the area outside of the stitching clean that's why I used that post-it tape there so I'm going all around I used my eraser there to make sure that I don't have any pencil lines just hanging there and now I'm going to color all my bikinis and just because I decided to work on a watercolor paper I can use my watercolor pen so these are clean color by Zeke I'm going to touch the color on one side of my images and then I'm going to use a watercolor brush to blend out the color all the way to the other side and I'm actually going with a rainbow color here so I'm starting with red, orange, yellow and so on I love my Zeke watercolor pens just because they are so vibrant and they come in a great range of colors I actually have only one set and all the colors that you see on screen right now came from the same set and if you are interested I will make sure to link you down below on the set that I have now as always you will find links to everything that I am using today down below in the description area as well as on my blog I am using my blue pen diluted with water and now with a brush I am going to add some splashes and this is going to complete that watercolor look that I am going for and now it's time to stamp the sentiment, I am just taking a pencil there to note where the sentiment should go and for that I am going to stamp with VersaMarking and then white emboss the sentiment so I am going to stamp that just inside that pencil line I am going to apply my white powder and heat set it with my heat gun again I am using my eraser to make sure that I don't have any pencil lines there and I am going to add some foam tape at the back of this panel and then stick it on top of my card and my card is pretty much finished if you want to add a touch of shine you can go ahead and do that just like I did so I am going to use my shimmer pen and I am going all over the beginnings which is going to turn out really shiny and this is going to finish off my card now for the next card I am going to use these two pattern papers that go perfectly together just because the one is solid and the other one has a lovely pattern so I have cut out a small rectangle and I am going to stamp on top the sentiment that says bits please now I am going to stamp that pretty much at the center of this panel and I am going to white I am adding some foam tape at the back of this panel and I am going to stick that at the center of the other panel that I have already cut out by the way the pattern paper with the bikinis on top is slightly smaller than a standard card now I used my bikini dies and I have cut out the bikini out of white cardstock and now I have also added some double sided tape on top of this cardstock so that I can expose the adhesive now I am going to add on top some glitter and I am actually going to use my nuvo glimmer dust and this is going to turn my bikini super shiny when you use glimmer dust make sure that you rub it with your bone folder so that it is nicely stuck there now I am using some glue at the back of my bikini at the bottom of that sentiment it's really hard to catch on camera but this bikini is really glamorous and shiny now I am going to stick that on top of my yellow card base so I am going to use some tape adhesive and stick it at the center so I end up having a lovely yellow frame that brings everything together and makes my card look more finished now when I am creating my 10 cards out of one kit cards that are quite simple and use up as much of the supplies as I can from the kit so this is a gorgeous scrap that I have from a previous card that I don't want it to go to waste and that's why I am creating a super simple card but really pretty so this is just a strip that I have left over I am going to stick it directly with my tape adhesive on top of a card base I am going to use my scissors to cut off the excess but what I am going to do now is to just stamp the sentiment for that I am going with a sentiment that says sending a summer hello I am using my misti to stamp the sentiment at the bottom right corner of my panel and I am using a lovely blue ink pad this is by Simon's stamp I can't remember which ink pad I used which color I used but you can use many different colors since they match perfectly and let's move on to the next card this is quite more involved it's not as simple as the previous one so I am going to use my misti and stamp some of the clouds included in the stamp set and I am working directly on my card base I am going to stamp the clouds with VersaMarking and then white emboss them I am also going to add some of the birds on my sky just flying away again I am using all three different sizes and I like the sizes because they give you dimension as if the larger one is closest to you and the smaller one is far far away now I am using this die there to create a wave and you can use pretty much any wave die that you might have or even you can use your scissors and I am going to cut out a few of those panels so that I can stack them one on top of the other just to create a little bit of dimension now I have three different pieces of a cardstock that look like waves and I am going to add some Distress Ink on top just to create different colors so you see that the one is lighter I have a middle one and a darker one and I achieved that just with the same Distress Ink but applying more color on each of those panels so now I can stick one on top of the other just by using glue so I will end up having three waves one on top of the other with that beautiful color variation that gives that ombre effect on my card I am going to chop off the excess now I am going to use these embossing pens and you can use either of those these are by different brands one is by wow embossing powders and the other one is by VersaMark and that is just embossing ink in a form of a pen so I have touched up only the tips of my waves I added white embossing powder and I am just using my heat gun to heat set everything and I end up having that beautiful white at the top of my waves I have also created this white frame which I am going to place on top of my waves and then I am going to stick that directly on top of my card base and this is going to finish off my card by creating a white beautiful frame that brings everything together I always like to have my cards framed I don't know why but I think they look professional and I used actually the foam tapes that were included in the kit they were quite thin so they were perfect for the size of my frame and you can see here that the frame is lightly raised since I used the foam tape and it gives a nice dimension to my card and I also stamped the sentiment hope you can see that it says what are you up to and I am also going to finish off and just by adding a couple of birds just because I thought that one side of my sky was quite empty now to finish off my card you can leave it as it is by no means but I just wanted to add some shine just because I can and I used my shimmer pen here and I hope you can see the shine that it gives on my waves for the next card I am working on a piece of white card stock slightly smaller than a standard card and I am stamping some of the designs from the stamp set now I am going with the sentiment that says bikinis are like fries you can't have just one and I stamped that at the center of my panel and at the top and at the bottom I am going to stamp 3 bikini designs on each row so that I will end up having 6 different ones now I am also using both the designs of the bikinis from the set just alternating each other so that I don't have 2 of them the same design next to each other hope that makes sense so anyway now I have a panel and I stamped everything with a mento toxido black ink so that I can use my alcohol markers to color everything I am not going to do any crazy coloring since these are quite small and I am also going to cover up everything with glossy accents at the end but the shading that I need from the glossy accents from the sign of that so this is going to be a quite quick card I am going to stick this panel with a foam tape on top of my yellow card base and I am going to use glossy accents to go all over my bikinis and it looks milky at the moment but it's going to dry totally clear and let's move on to the last card for today for that I have jumped off one of the card bases to be 4 ¼ x 4 ¼ and as you can see I have cut out a window at the front by using a square die I have added a square panel white panel on the inside and I have cut out a bikini I am going to stick the bikini on the inside making sure that it shows on the outside quite centered this is a super easy little card I am actually creating this for my daughter don't tell her that and just because I bought her a new bikini and I am going to put this card inside her gift now I am going to also stamp the sentiment on the inside of my card just below that bikini and again I am going with that sentiment with the fries and too many bikinis and just to finish off my card I am going to add some force stitching around the front of the square now actually the die that I used has added force stitching around it but I want to make it more visible so all I have to do is to drag my pen all over those lines and of course you don't really need to have this die you can always use your white gel pen to create your own force stitching around the window and just because I cannot stay away from my glitter pen I am going to add some shine on the bikini and that finishes off the last card for today so now let's take a quick look on all the cards that I have created for today by using the July card kit by Simon Says Stamp don't forget that there is a giveaway running on my blog so if you want to win this card kit make sure to go to my blog and enter your details and don't forget to leave me a comment and let me know which is your favourite card from all the 10 that I created for today now let's take a quick look on what's left from the kit so I have pretty much all of the confetti, lots of foam tape the dies of course and the stamp set as well as lots of leftovers and full 6x6 papers that I haven't used at all so here are some close up photos of all the cards that I created today I hope you had fun and got inspired a big big thank you for watching and for leaving me all the lovely comments I hope you will all have a great day and see you next time