 Hi all, now what I'm going to be doing is using JMRI's panel pro is install a small section of mainline track with a couple of turnouts and a passing solid in and running through how we actually get that onto our panel pro panel. So to start off with what we need to do is install our turnouts. So we start off by moving up to the top left hand side of the screen clicking on turn out and we'll click on the right hand turn out first placing the cursor onto the left hand side of the screen holding down the shift key on the keyboard and then left clicking on the mouse and this installs the right hand turn out in our screen. Next what we need to do is install a left hand turn out on the opposite side so that we come back up to the top of the left hand side the screen click on left hand turn out holding down the shift key again doing a left click on the mouse. You'll notice that the left hand turn out is a orientated the wrong way so what we do is do a right click on the circle here in the turn out scroll down to rotate and we enter with a rotation angle of 180 degrees click okay and then that orientates the turn out around the right way so we'll just move this out to the right a little bit move anything that we've placed on the screen it's just a matter of holding the cursor over the object then doing a right hand click holding the right mouse key down and then we can move that around. Then what we're going to move on to is installing our first section of track in between our two turnouts so you'll see the anchor points on the turnouts here are red at the moment so then what we need to do is install a track segment so we move up to the left hand side click on track segment want to be picking main line so ensure that's ticked and then moving to the right hand turn out moving through the straight section of the turn out holding down the shift key left clicking on the square and then dragging the cursor across to the other turn out and then letting the mouse key go and you'll see that we install that first section of mainline track you can see that it's worked by the anchor points in our green on both sides now what we want to do is we want to install some mainline track here this side of both sets of turnouts and what we'll do is say that we can install two blocks on the approach to each of the turnouts we're going to install two separate blocks at the side so to do this what we need to do is install anchor points so we click on anchor point at the top left here again holding down the shift key left mouse click there's one two three and then four and now what we can do is install our mainline track between each of these anchor points so back up to track segment ensuring mainline's ticked shift key left mouse click to the first anchor point shift key again and then back to here you'll notice that whenever the track's been installed correctly we'll get these green anchor points now again moving over to the other side shift and left mouse key click and again you can see now that we have our two sections of track or two blocks either side of the turn out now what we want to do is we want to install our small passing siding so what we can do here is we just add another couple of anchor points just get the passing siding a little bit further away from the mainline track click back on track segment now what we want to do is unclick mainline and this will install the passing siding and see how the lines are a lot thinner than the mainline track and this will indicate that the track's actually a passing siding what we can now do is we can alter the angles of these by doing a right mouse click and then dragging these tracks out a little bit and we can therefore drag the distance out and change the angle of the track until we just get the geometry right and now you have it now we have our section of mainline track on the top here with two blocks approaching the turn out block in between and our small section of passing siding on the south side of the mainline so in our next video we'll be going through how to install the sensors for each of these sections of track