 Hello everybody! This video is about how to disable Windows 10 firewall or add a program onto its allowed apps list. So this is how you can disable the firewall. Here is the first method. Right-click on the Start menu and select Command Prompt Administrator from the list. And to recommend to disable a firewall. There is a key message – it means that Windows 10 firewall has been disabled. In this case, all firewall profiles are disabled. To enable it, use the same command, but in the end it should have on instead of off. Windows 10 firewall has been enabled again. Note – you can hit the pause button to see the text of these commands, or have a look in the description of this video. They will be there, too. Here is the second method. Open the search field, enter Windows Firewall and start it. Just turn Windows Firewall on or off. Note – you must be an administrator of this computer. Check the box Turn Off, Fibers Public and Private Networks and click OK. Note – if you don't need to disable the firewall completely, but only to add a program onto its allowed apps list, there are two ways to do it. Let's study them. Here is the first method. Go to the tab Allow an app or feature through Windows Firewall. If the button Change Settings is active, click on it. You still must be an administrator to do it. And then click Allow another app. Specify the path to such app, add network types, if necessary, then apply the settings. Ready? The app is on the list now. Here is the second method. Go to the tab Advanced Settings, select Inbound Rules. Create a rule for a program to allow its access to inbound connections. After that, do the same for outbound connections. We can also create a rule for separate ports – to allow access to separate ports for certain programs, games, etc. That is all for now. Thanks for watching. I hope this video was useful for you. If you like this video, click the like button below and subscribe to our channel to see more.