 Hi, I'm Michael André, CEO of WhizzyLab. At WhizzyLab, we are a team of IoT experts, and we help our customer design their connected things using all major communication technologies. WhizzyLab developed a triple stack solution combining in a single module LP1 technologies like SIGFox and LauraVan with Dash 7, a medium range, open startup protocol supported by an international alliance. We developed this solution because we believe it's not possible to deploy large amount of SIGFox or LauraVan devices for five to 10 years without any possibilities to upgrade. With the addition of Dash 7, we enable, code upgrade, and maintenance without any hardware addition. To allow our customers to prototype their IDs, we are offering a development kit composed of two objects, one gateway, and a cloud solution to visualize your data. The device is based on the STM32 nuclear board with the addition of a communication and sensing shield. Combined together, it will allow you to develop your own application and visualize your data using the WhizzyLab cloud solution. Getting your first application up and running is only a matter of minutes. You just need to plug your gateway to a power source and connect your network cable. Once the gateway is booted, just go to the administration interface and register it to our cloud solution. Then you'll need to create your account on the cloud solution, on the dash7board.whizzylab.com. Once you're registered, you will see the first site powered by Dash 7, powered by WhizzyLab. First thing to do is to register your gateway, assign your gateway onto the site. To program your device, we'll be using embed.com environment provided by ARM. Then you can import any example program provided by WhizzyLab. Just plug in the device using on the USB of your computer and you can just drag and drop the binary onto the master edge. This will program the device. So now your device is up and running. Assign it to your site and now we can visualize the data. The large number of sensors that you have on the WhizzyKit allows to implement many applications. As an example, here we can do a door detector using the magnetometer of the WhizzyKit. This technology has been deployed in many applications. For example, in Sparkpacking solution, if you need more information about our technology or our service proposal, just contact us at WhizzyLab.com.