 Hey everybody. Welcome to Hot Makes right here on the edge of tech, where we aim to educate and entertain the maker world. Hot makers, how you guys doing? I'm here with the one and the only, Pooch is in the house. How you doing Pooch? I'm good. I am good. I'm here to entertain, as you say, and I guess we're going to educate. I don't know. I'm going to get educated. I don't know if we're going to impart any education, but we'll see. I love it. Oh, that's too much fun. Well, I should have said this is Nerdy J and the Pooch. I'm J and the Pooch coming at you. That's awesome. So last week, you weren't here and we were talking a little bit about... I was here in spirit. You were here in spirit. I know. We were talking about the verfs, right? The before and after verfs. Yes, yes. And it was funny every time. I went on both as you did. And people were like Nerdy J, Nerdy J. And yeah, they were giving me a hard time. People love Nerdy J, man. There's a couple of people out there that want techie J, but I don't know if we should do that right now. Too bad. This is not a democracy. You don't get a vote. It's Nerdy J. I don't board or GTFO. My ear someone says hearing. I don't know what's going on, but that's awesome. Talking about the ear savers. Oh, the ears? Yes. I've been prittin' a crap out of those for my hospital. The nurses love them. They'll love you for it. I do. I put out 350 of them just walking around, I think, right around 350 already, which isn't that many, but it is. So today I have a different setup. So that's why I'm looking up. I kind of showed you earlier, but I needed to change. I needed space back and stuff. So I set up a sheet. Show us. Show us. Oh, you want me to show you? Show us. So I set up a sheet and I set up a projector. And now I'm looking up because it's not my projector is not low enough above me yet, but I'll fix it. But hey, you guys, how are you guys doing? I'm going to show you. Let's see if I don't take myself out of this. Show me what you got. So this is what I'm looking at currently. Oh, yeah. So my camera there. Advanced teleprompter system you have. You could say that. I love it. But it's a little high, so I need to work on that and I'll get it. I'm going to dial it in once I get an actual mount for my projector. I made one out of wood. It's above me way up here. But who needs an ear saver? I love that. Mike from never let the machines win had a good idea last week. Thanks for the tweet or the private message on Twitter, Mike. I hope I fulfilled that today. I'm not sure how it worked out, but let me know. And then let's see red five checking in. I love it. But anyways, we got some cool stuff. I know we only have pooch for around 30, 40 minutes tonight. He has another meeting to get to. I know I'm sorry. It won't, it won't always be this way guys. I swear it won't. We're not. You're okay like that. We understand Linus is better than us. I mean, it's all good. That guy. I told you, I didn't even get to meet Linus. I got his producer, you know, this was like very, they only, like I said, they only dust off Linus, you know, for the, for the, you know, one video. And then they, they put him back in his, his storage, probably cryo. Yeah. Back to his house. Yeah. I love how that he was just saying, it looked like a lovely day in the garden at Linus's house. Did you see that? He was just like sitting out back. The birds are chirping. Very nice. That's awesome. That's awesome. And it's, it's a lot of fun to watch that stuff. And it's awesome to see you on the other shows. And this, you'll have to, you'll have to tell them next time. Hashtag hot makes like in the middle of your, like right in the middle of your interview. And then what's going to happen is they'll edit it out anyway. They probably will. Yeah. Cause I tell you, I'll just keep going forever. And it's really hard. See, here's the secret is you just keep talking really fast so that they don't have anywhere to chop and edit in on you. And then they have to keep it all. Good luck with that. But cool. We got some really cool stuff today. We're going to, we're going to kind of rearrange so we could get you involved with some hot makes of the week. And then are you going to do a pooch rant today? Oh, maybe I have to, I might have to improv a pooch rant. I mean, I'm sure I could come up with something to get angry about it. If we need it. All right. You want me to read if you'd me some, feed me some ideas in the chat and we'll see if I'll see if I get fired up about anything. So we'll, we'll start it off with that. And then we're starting off with that. Okay. We'll start it off with the hot makes of the week. Yeah. We'll come back and we'll see where you're at as far as, you know, as far as the poo trance goes, we'll see what time is at. And then we got a lot of cool stuff. So let me just share that screen. We're going to jump right into it. Feel free to keep chatting us. I, when I do this, I'm only watching the stream yard chat. So I'm a little bit behind, but let's go see here application window. Oh, you know, it's right. It was Easter yesterday. Yeah. It's, it's awesome. So, uh, three printing Viking Viking, do Viking celebrate Easter? You wouldn't think, you know, that's a good question. I'm not sure, but Thomas printed this, um, this egg. Um, where are we going to be in the first one? Right. Okay. Just making sure. So Thomas printed this egg. He said he printed it for his fiance. Uh, it's an alien slacker pulsating purple PLA. And, uh, that's a pretty, uh, pretty awesome egg for Easter. So happy Easter everybody. It's a good tongue twister. I want to know what the base, uh, situation is like, cause you know, you bring a, you bring a cylinder or sorry, not a cylinder, a sphere kind of object down there. And it, you know, it hits at a point. So does it have a special base on there? Getting that to balance and not knock off of there. Maybe this is just for photo, photo opportunity. I don't know. Anyway, it looks nice. It looks clean. I like the, I think it's Viking magic. Viking magic is always the answer to that. And this is, this is, uh, Josh's pulsing pulsating purple PLA. That's the, uh, that's the PPP, the pulsating purple PLA. I want to see it actually pulsate. All right. Next step. What do we got here? Oh yeah. Yeah. This was awesome. So, uh, for as guard, check this out. Wow. That's pretty dang awesome. Clean resin right there. Or is it just super finished? That's pretty big for resin. Uh, you think it's just like sanded to high heaven? Um, we'll go back to the tweet and we'll look at, but that's pretty dang smooth for detail on the, on the wings there. Yeah. I was just looking at this. I mean, hot. Hot. Hot. My scound board. Hot. Yeah. Look at that. Skin. Like just look how like how smooth the skin tones are. Like the, And the flowing hair. You know, I think I'm looking in a mirror. You do. It is almost like looking in a mirror for you. Where's your winged helmet? My friend, you need one. Uh, this is the first time I've ever sculpted Thor before. Um, he's loved the classic comic version, book version of him. Let's see. It's, oh, you know what? It's a Piappoli phenom. It's a phenom. Yeah. So it is resin. Yep. Yep. And they're, they're about ready to release a couple new machines. Um, both, I believe bigger than the phenom and one with the monochrome screen. So that'll be, that'll be awesome. Um, The, the DFA beast, the death from above laser. Yeah. Cause what the world needs is bigger resin printers, right? Like big, like, Yes. Just like you should be pouring gallons of resin in. It's just going to cost you like at least a grand to fill up your resin. That's where I'm already fall. Oh, yeah. Um, so this one right here came to us, uh, a shadow box to commemorate the OG printer parts is first Prusa MK2. I love that. Look at that. I love that idea. That's clever. I really did. I do love that idea. It's, it's a cool, like way to display. You know, Very cool. So that's the, that's the original Mark two S Mark two. It looks, it looks like it. Yeah. Mark two S. Nice. But I just love how we put it together with the pieces here and everything. That's, it's great. Nice work. Uh, I cannot see chat currently. So hopefully I'm watching it. They're not, they're not being too mean to you. Okay. Good. Good. Uh, gotta be careful. Robbie max in the house. So we gotta be careful about being mean. You know, will he, will he just put everyone in check? Is it what he's the mean police? I have no idea. Okay. Sure. He's wing hashtag wingman number one. So, Oh, I love it. So here's another one. Uh, looking out Robbie Mac. Oh, this looks like a bear upgrade here. The purple bear. Probably definitely is a bear upgrade. And, uh, let's see top made it on this one. Other two, not so much. And I thought that was a really cool way. You know, a design for an egg as well, being Easter and. Yeah. No, that's a, that's a clean looking print. It is a clean. Uh, that's a lot of retraction happening there. See, that's a good test of how dialed in you are anytime you got just tons of little retractions like that. I'd be, that would be a good torture test. And in my wife, a huge purple fan would absolutely love the Barney color here. Mm hmm. Mm hmm. Yeah, that's hot. I love it. Definitely. What we got next? Oh yeah, this was cool. What? Check that out. Here, let's see. Shape, shaker, dragon. Little dude riding on him. No, I know it's not actually, it's more of a dog than a dragon, but, or some sort of thing. I hear. It's pretty cool. I love it. It sounds cool too. I don't know if you can hear the sound. What is it? So what's going on there? It's just like a, like a big old camshaft basically at the bottom. Yeah, it must be. It's kind of, kind of given it the old wiggles. That is. And, and, I believe that's what it looks like to me. It's kind of all attached underneath here. Mm hmm. And that's a very good description, kind of like a camshaft. I love it. Yeah. I thought that was, that was really cool. That is super cool. I like that. I wonder, did you see anything about how long it took to make that? Cause that's a lot of little pieces. Something dragon 3d. Jimmy said, is that a, okay. And you can download it on our homepage. Okay. Yeah. So, so do we have a, do we have a means right now for people? Okay. So it's, it's on Colts. It's on Colts 3d. Yep. So do we, do we have a means of, of capturing? Cause I know we've been capturing the, the people that are tagging it, but like, these links, you know, after the fact without having to watch through the video again, we, we need to work on that. So right. So we like, here's all the links that were shown in hot makes this week. That's a good idea. I should put something together. Um, I think we could probably just take the, the, the if this than that, that feeds us everything and probably just pair down, you know, cause the link will be in that. So it's probably just a little copy pasta. Sure. Cool. I mean let's do it. All right. We need a, we need a producer to handle our, our admin work like that. Look at this. Linus, will you get on that for me? Okay. Anyways, this one was really cool. Silver, rub and buff printed on the Creality Ender three, um, with matter hackers, gold filament primed and, uh, primed and rub and buffed with silver wax compound. Uh, we were rubbing off. Yup. That is sick. Yeah. It's like, Dela, Dela's muerto. Yeah. Yeah. Yeah. Dela, Dela's muertos. Uh, and then, so it's like a skeleton with braces. Look at, he's got the little things on his teeth. I love it. Nuts. Nuts. That, that for me, that's a hot. That's super hot right there. What, that's a sweet model right there. You know, having to get that, uh, made to, yeah, yeah, sweet made to your, fit your face. Like, he happened to have the right face for the job here. Um, that's a good question. I think some people actually, because they have a 3d, a scan of their head. I think that's what uncle Jesse does. You know, he fits everything to his 3d scanned head and then scales it to a hundred percent. He has to, because the dude has a giant dome. Like it's, it's humongous. I've seen it in real life. It's like, he's 20% of that guy's head. It's a lot of head. That 3d Jimmy says, imagine going to the dentist, getting in the chair, and then taking a mask off over this mask. Oh, you're wearing, you're wearing your surgical mask, right? And then you revealed that. Yeah. Great. That's pretty awesome. Maybe some Halloween enhancements, you know, like light and, and like smoke coming out of it. That's phenomenal. Wild. What do we got here? Oh, so what we got here is, what is this? The majestic king of the jungle. It looks like they did it at 300 millimeters. Holy moly. Oh, it's 300 millimeters. Okay. I was like a second. That's fast. 60 millimeters a second. There it is. 35 hours. Ender five. Ender five. Five alive. Yeah. I thought that, you know what this reminds me of? One of those old plastic injection mold things. You get it like the zoo. Oh, right. I was going to say looking in the mirror again, but you know, because the main, the main, not the muscle part, the main, the muscle tone too on your hind quarters, I'm sure is at least comparable to that. Yeah. I just like to hide it because I don't want, you know, I'm married. I don't want the women to come after me. So I hide it with the overcoat downplayed. Yeah. Yeah. It's smart. It's hard enough to beat off, you know, the ladies that, you know, come in at you as it is, I'm sure. So let's go. Lindsay's rolling. I literally just heard Lindsay rolling her eyes from the other room. Like, I think it was, we did. Yeah. And I'm not watching chat. I'm not sure she's on right now, but I'm sure she's on. She just chatted something, but this is a super clean print for an ender five. I mean, sometimes I wish I had just supports like that just to, like, cause when I'm tired in the middle of the day, I just want to be like, any chin supports. Hang on. Oh crap. There we go. Like this. Do you just like let it hold you up? Yeah. You know, for my loins and, I just, I just need some supports, human supports. All right. Now that we're talking about loins, onto the next one. No, I heard them. I love it. Oh, let's see. But that print is, oh geez. 3D Jimmy's pulling some Brian Vines going on here. Oh, it's a BV 3D not in the house. So somebody's got to step it up on the pun patrol. Not right now. Yeah. Oh, look at that. Two and a half days. Davos by Sidney. I believe that's how you said it. I think that's how we say it. Look at this. I mean, this, the detail in this model is awesome. Yeah. And that's FDM. Yeah, I can see. There's definitely layer lines in that. Man, that's, that's a great print. I love the color modeling. I mean, whoever modeled that just did a phenomenal job. Uh, Sidney did. Good job, Sidney. Right here. I swear I followed, I followed this person last time when we showed their stuff. Don't lie. Don't lie, man. You follow them, then you unfollow them real quick. I don't. I have to play the following people. I, I need people to follow me. So keep following me. No, I'm just joking. Actually, no, because I would require me to go back and actually unfollow them. So I don't. Sure. It's twice as much work to follow and then unfollow them. But I love this. They're blocking you anyway. He says battle cry. Yeah. It's so beautiful. Yeah. Yeah. Oh yeah. Here's another Don, Don Burkholder. Uh, let's see here. Frozen Sonic Mini. Yup. I like it. Look at that. Huh. And then the mic, this gets a little modeling there. You got a baby Yoda in the background. Some good little, good little figurines. What model is that? This is, uh, Akali. Akali? I don't know. Yeah. It's nice though. Someone in the chat will, uh, correct me because I, I'm apparently, I'm probably saying that wrong. But, uh, hey, Sergio's in the house. Hey, Sergio. Um, Hey, Solan says he has a power show script that can follow it unfollow all the list of Twitter accounts for you. Perfect. Perfect. I just need bots. I just need bots to do everything for me these days. Somebody write me a bot. Oh yeah. Here we go. Uh, functional design by Bugman 140. Silk Rainbow. My daughter loves it'll be perfect for our Easter egg hunt. Check this out. Oh, gorgeous. I want a life size, one of those that I can like nap in. Yeah. I was just thinking a nap pod egg. So, yeah, I'm going to do that again. Challenge thrown down. Curl up in there. Curl up in there. Yeah. And then, and then I could be launched. If I need to just be a pot. Yeah. Perfect. Make it compatible with the latest, uh, you know, SpaceX, uh, Crew Dragon, you know, I think, I think I need to print a life size version of this. I think we could get a sponsor to provide enough. We could get Steve to bust out the part daddy. We could totally make that. Yes. That would be awesome. It would be awesome. It's a lot of fill in it. Rainbow silk part daddy. Yeah. I'd be hot. Can you imagine that thing printing in rainbow silk somehow? I love it. I want, I, I, you know, I would love to get my hands on a part daddy print because, uh, those things are, these things are sweet. They're cool. They are cool. Uh, what do we got next here? Oh, okay. Go ahead. Okay. What is that? Uh, it is. Let's see. He said, I really didn't know there was a model of my face on Thingiverse. This creepy Easter. He's printed in filimento, filimento, filimentum, vertigo starlight. Uh, Nice. It reminds me of what's going on there. It kind of has a two face, uh, from like Batman vibe, but not, not quite. Angwin and, uh, Coneheads. Coneheads. Yeah. For sure. That's, I don't know, but very strange. Yeah. I really, I really like this filament though. It's nice. It's nice. It's got that galaxy. Yeah. Or like the, you know, it looks like atomic starry night. If you ever seen that. Uh, that's that's a hot filament. That's one of my faves. Vertigo starlight. All right. We're going to have to check out vertigo starlight. Um, nice work there. It, that is creepy. I should print like a full size one and put it next to my wife's back. Yeah. She would love that. I'm sure. Just like put it on your pillow. She's sleeping. When she wakes up and then she's staring right into the, solid. Is this a puzzle leg? What do we got here? This is, yeah, this is a puzzle egg. This person's take on the maker muse. Eastern puzzle egg. Different colors of wood fill PLA. And, um, let's see what the core of PETG. And let's, let's pop this open here. There we go. Oh yeah. Check that out. Let's look. Nice. That's rotation. It's a very nice turntable. I love it. Looks good. I thought that was cool. I think this is on my list of must things, you know, things to print now. You can put that on your shortlist. Yeah. I got to put on my shortlist. My nap pod done first place. Yeah. We're going to have to, we're going to have to outsource like a, that'll be a good crowd sourcing print. Right. A giant egg nap pod. And what we gloop it all together. Yeah. I don't want seams because it'll, it'll be disruptive to my naked skin because you can't, you can't sleep clothes in a pod like that. You, because that way it's like that seems like he's, he's been true when I'm going to come like plopping out of the thing. Well, yeah. Out of the rhino. If you do that, I will print it just to see it. That would be hilarious. I got to say, You know I would do it. Don't dare me. That would be amazing. Right before your, your next spool race and that'll really throw CHEP off. It would. That's cause it's not, you know, spool racing is 90% mental. We wheel out the egg, you know, and then we push the egg out. And then I'm like, the fog comes out of the door, you know, but it, so this one comes to us by Robbie Mack. DND, Tomb of Horrors 3D printed in FDM on a CR 10 S4 painted and in Philly here added. So dark. Let's see. Oh yeah. Yeah. Yeah. That's hot. That is awesome. I think, I think Warcocky tagged that, didn't he? Cause I remember he was saying like, and I said that is hot. I loved it. I still do. So here's a, here's a challenge for anyone for, for this week going into next week. If you can out tag Chris Warcocky on the hot makes. Tag off. Because I would say 75% of the tags are coming from Chris and, and that's awesome. And this looks like, you know, this is some models mixed from here. Well, Chris is very plugged in, man. He knows what's hot and what's not. And I love it. I appreciate it. Keep it flying too. I can't, I'm not watching the chat, but I didn't see him on there yet. Oh, he's on there. Is he on there? Yeah. He says, this print of the year, Robbie Mack. Print of the year, Robbie Mack. Hashtag win guy. Number one. Sonic is ready and available to download for my patreons. Also a very, also an early work in progress of the next sculpt coming soon. Let's see. Hey, hey, Warcocky just throw you two bones. Tags for, he's a tag sport. So you got, yeah. Thank you. Let me, let me jump back in here. Thank you so much for the, for that, Chris. Oh, great. $1.99. Paul. Thank you so much, Chris. I really appreciate that. I love it. You tag, you do all the work and then you give me a $1.99. I mean, that's, that's the best thing ever. Everyone gets a little luck. This is great. I appreciate that, Chris. My heater just kicked on and my makeshift projector screens blowing in the wind now. So this will be fun. Maybe some design. Well, what happens is I can't get a real screen yet and until I get the projector in its final resting place and I measure what size screen I need, right? Sure. And, and so now I have a makeshift as you saw earlier, a sheet up here and a design flop, the heater kicked on and now like half the screen is like, but, right. So now I got motion in all my pictures. Just full motion. Yeah. There's a little sonic action. This is nice. I got, I'm glad he doesn't have the weird human teeth that he had in the first. Yeah. Oh, Donkey Kong. Oh, DK. Yeah. This is like evil sonic though. Did you see the sonic movies coming out or something? Yeah. Well, it came out. There was a sonic movie. Oh, did it just come out? Yeah. That's great. That's going to be interesting. All right. I haven't seen it yet. I'm sure. Is it any good? Anybody in the chat, if you've seen the sonic movie, tell us if it's any good. Yeah. If you've seen it, let us know. Cause I would, I'd be curious to see if it's any good or not. On the other hand, the Tiger King. Well, anyways. So this is another good one. Let's see. Printed huge at 0.25 millimeter layer heights on the, 0.25 millimeter layer heights is huge. That's what I was thinking in my head, but I didn't say it. Artillery X1. No, I mean, it's all relative. So on that, what printer did you say it was? Artillery X1 with a Hermera on it. Okay. Okay. So it's a side window. So yeah, that's, that's decently big. That's a, this is a, that looks like this is Tom Jackson's place. I recognize that background, right? Is that, is that filament frenzy? That. Um, yep. Oh, we recognize this Tom Jackson's wall. This guy. That's pretty impressive actually. Like, Hey, I know that wall. He's got a very, he's got a very sweet print cave setup going. Nice. Yeah. The dude knows how to print. Nice work, Tom. And that, that is a great print there. Also, I'd put him, I'd put him in my top 10 Beards for 2019, 2020 running. With, with war cocky. With war cocky. So if you want to be in Pooch's top, top 10 for, for Epic Beards, you know, send your submissions, tag it hot makes Epic, but only Epic Beards apply please. Like if birds would not consider living in your beard, you're not ready yet. I love it. Let's see. Jeremy Babcock. Oh, fuss. Yeah. I can't talk. Photos mint. Photis. Yeah. Photis. Photis. Potato. Potato. I don't know. I haven't picked the top two yet, Chris Warcocky, but you know, we'll see when we have the beard off, the great beard off of 2020. What time we got? Yeah, I know we got to cook through here because I got, I got to be bouncing in about seven minutes. Let's see what we got. Oh, here you go. Oh, multi-color. There you go. Use the palette to pee. Uh-huh. Yep. I fill in the frenzy and Sydney great file. I think that was pretty cool. That is cool. Yeah. So he did the, you saw the original mandrel he did. So this is kind of his little, looks like Easter pastels remix of that. It's very cool though. I like it. What we got next. Oh, a little diorama that's painted for Easter. Okay. That was cute. All right. Easter eggs. I like it. I like it. I dig. Um, that was from, uh, Bob, uh, Bob Carnes, if I can talk. Good job, Bob. Oh, we'll follow some more people. And, uh, Andy Padmore did this really cool print. I, I saw this the other day and I was like, man, that's pretty cool. Uh, yeah. I believe, yeah, I believe so. Uh, is that the only angle we have? Uh, it is a Sydney opera house. Yeah. Okay. Um, I'm under 3.2 layer height. Um, very nice though. That's really cool. He's going to start printing some more cool stuff like that too. I told him to tag us. Nice. All right. I'm kind of going faster here. Oh, the light, yeah, maybe little, little bottles remix to hang on the wall. So he can sort his nuts. You got to, you got to keep your nuts sorted, man. That's very, it's critical. Yeah. Uh, you don't want your nuts mixed up. No. Um, it's sometimes, you know, they get everywhere and I've, I sit on my nuts. It's no good. Yeah. Well, if this was a bag, it would be a nuts. Ah, nevermind. Anyways, nice work, uh, Steve, and that's a really cool idea. Uh, I mean, I'm assuming just pop this out and you dump your nuts in your hand and you keep moving. It's, that's a really cool idea. What I always do. Dave Randolph. I had to, I had to get that. Yeah. Yeah. Yeah. Yeah. Yeah. Is that from like, like mad magazine? Like it reminds me like the old spy versus spy. Is that like, what is that? It's hilarious. You know, you know, like the old magazine stuff. He's going to Costco and get some toilet paper. I mean, basically, yeah, I definitely, I know what you're talking about in, plague mask. I've seen it before the plague. Birdman or, I don't think I've seen, it's a, it's a, for a movie. I've seen it. I've seen the reference before I haven't seen the actual movie. So Warcock, you say it's called the plague doctor mask. This was done on an LLU printer in resin. I thought that was really good. That was a really cool print. Hmm. I got my guitar and I got my handgun. I love it. It's Johnny Silverhand. Johnny Silverhand. Okay. I feel like, I feel stupid that I don't know some of the characters. James Bricknell. Nice work, James. Oh yeah. I like James. James is a cool dude. I don't, I don't know, somebody explained what Johnny Silverhand is and I'm going to get totally flamed in the chat for not knowing, but. And last but not least in the hot makes of the week here, the 3d misprinter sent us some stuff. He takes old tablets and put them on the wall with a weather app running. He had a tablet die. So he redesigned this and a functional print of the week. I'll call it. Nice. Where's the, where's the tab? Oh, there it is. That's very sci-fi that like, you know, yeah, you just have to put your hand on it for your door. You know, you just, now misprinter, you need to work on a door that goes. Right. And it just, this needs like a handprint, that recognition. So you can put your hand right on it. Right. My voice is my passport authenticated. That's different than the handprint. But yeah, some biometrics. Right. Little biometrics in there. All right. I'm going to pull up the, if I can. This is a book by William Gibson, a cyberpunk character. I like that. Oh, got it. Okay. Cool. There we go. Well, that was our hot makes of the week. You guys want to be on hot wakes hot weeks, hot makes of the week. You want to see anything up here. Hashtag hot makes, shoot it out there. If you can beat Chris war cocky this next week, growing an epic beer. I'll send you a prize. No, the tag. That's stacking. Yeah. If you could beat Chris war cocky, growing an epic beard in just a week, then you would be your hands on winner though. I love it. What we got? We don't have much time. Do you have a rant for us? Do you want to hit one? No, you know, I'm going to take it easy on you all this week. Wait, let me think. No, I don't, I don't want to stuff. I'd rant about it. People are tired hearing about right now. So let's just, we'll keep it. We'll keep it on the positive. I like it. I feel good because I can see chat again. Yeah. Yeah. Good. I mean, you got to, you got to be connected with your people. That's, that's critical. I know. I felt, I felt, I'm going to have to do the dual screen thing. I could do that through the projector. I'll have to do that for next time. But yeah, nice. I love the hot makes. Keep them coming. Thank you so much for the dollar 99. As someone else, we would know. I was just saying it. I was just going to say it. Yeah. Yeah. That was awesome. Yeah. Yeah. Guys, like, thanks for tagging them. I love, you know, but especially right now it's like you guys are really, I just want to throw out some pooch love instead of a rant this time because, you know, I've been so occupied with other things that it's just like, I need, I need the hot makes to just feel like there's balance in the force again. You know, you want to feel like I'm in touch. And so I think a lot of you guys probably get that out of it too. Like that's what, why we do what we do. Right? Right nerdy J. I agree. I agree. And I love seeing, I love seeing the stuff people text and chat and hit the hot makes with because honestly, I don't have a lot of time to look. There's so much of it. Right. You could never, you know, keep track of it all. And it's like, we don't want that, those little juicy little nuggets to slip through the cracks, you know, right. And I definitely appreciate everybody who does tag and keep it coming. Like I said, I will count them this next week. Chris, what's he got? What's the number? What's the number? I'll have to go. I don't know. I mean, I mean from now till next Monday, if someone can beat Chris's number, you're going to get hot makes bomb. No spamming though. It's got, you know, don't spam us without me. It has to be, it has to be cool stuff in your eyes, but not like every comment you see, you know, I mean, don't retweet me 700 times because those don't count. I have a saying in, in my, my web development career that I've always said, you know, and it's, it's, it's when, when everything is bold, nothing is bold, right? You know, so it's like, you know, people take copy, they want to flow copy and they want to be like, oh, this needs to be bold. This needs to be bold. This may be like, if you want that impact, right, you got to make sure it's special, right? So don't just, but we, we got plenty of room for more, right? There's plenty of room for more, but like we don't want just, you know, it's, I should have said that. We're going to get, I'm going to get hammered. It's going to be awesome. That was a little ranty. Was that little ranty? No, that's okay though. That's okay. Okay. I caused it. All right. I like it. All right. I got a bounce. All right, man. I'm going to say, everybody. We'll see you next. Thanks for being on the chat. Thanks for the 199. Chris work hockey. Thanks for all the hot makes keep tagging them. I'll be back and I'll tell you more about what I think is how to not do it next week. Anyway, take care of my boy nerdy J. In the meantime. Okay. All right. See you next week. All right. Peace out. All right. I'm back. Holy moly. I'm giant on my screen now. So we're back. I got some really cool stuff to talk about since he had to go. I moved up the hot makes. And now I want to talk a little bit about maker news. You know, I think there's a lot of cool stuff going on out there. And some of the news that hit us this week is a Creality. Creality. I think it was maybe it was the end of last week, but really they put out. They debuted. We'll call it some new printers. Some of them look really cool. Some of them look pretty interesting. And I know none of them are out currently, but they're in the works. And I also think they're going to do a crowd source printer. If I understood that, right? At least one of them will be crowd sourced. Yeah. The belt printer, the Ender six max, like Tony just said, and Brandon's 112 said the belt printer. I think that's like the ender. Or CR 30, the belt printer or something like that. You know, it is they got some really cool stuff coming. They did a, what a Ender three v2. You know, they got some really cool stuff coming. They did a, what a Ender three v2. I know Chep did a video on it. And a lot of people are full thinking he actually have one, including myself. And then I watched the video again. And he says, this is a digital, you know, render really a picture. And I was like, ah darn it. Cause he was asking questions like what the board is going to be and stuff. And I was like, it's right there. Just take off the cover. But then I realized that he didn't really have the printer in front of him. He, he was a genius and put it there and it looked super good on his video. It really did look like he had a printer there. Um, yeah, CR, CR 30. Um, let's see what else we got. Belt printer equals CR infinity. Maybe it will be, that would be really cool to have. And it's going to be, um, very interesting to see a commercialized one, you know, um, I don't know, uh, $270. Are you talking about for the CR 30 or for the, for the under three, uh, V2 Easter was great. Thanks, Paul. Hopefully everybody else had a good Easter. If you celebrate Easter, if not, hopefully you have a great day yesterday. Um, but yeah, I think, um, yeah, the under three V2 at a buck or 270, you know, I'm not sure I, I don't necessarily know if it's going to be too expensive at 270 or not because if it has, um, uh, if it has everything it says it has and it works very good, then I think it'll be worth it. I mean, you can't really beat for the price, right? You're never going to beat the under three price, uh, you know, for what it had and everything like that. So they got a good, they got to go up a little bit until it comes back down, right? Um, nice. We did get a little bit of snow out here. Um, that's true Zolan. It is kind of like a already modded under three. So there's that. Um, very close. Tony, just a little bit spiced up. We'll call it, but you never know. It's, I'm curious to check one out. It'll be interesting. I do think people have already taken their ender threes and virtually turned it into what they made. But the cool thing is to me, is that Creality was watching what people did and upgrading and listening to what people, um, it looked like they were listening to what people wanted and they were watching how people upgraded and they said, Hey, we could do that. And they did it. And, um, I think it would be pretty cool. Tony, I'm not sure I, I hope it has a 32 bit board going forward. I hope they all do. Um, but yeah, I thought they had some really cool. Um, one, five board. It's not a bad board, but I was hoping 32 bit. Um, but I thought they had some cool debuts. If you watch their, their, their videos, they were super cool. The, the production was amazing and all that. So I thought that was awesome. Um, yeah, the core X, Y conversion for the under three, I saw that. I think, uh, Michael from teaching tech just did that. And that was a really cool, uh, really cool project. Um, I can't talk a lot about something right now, but I can tell you there might be another really cool project coming for the under five. Uh, that is similar. But, um, let's see what else we got today. Next thing I want to talk about some more maker news. Um, yeah, big show to watch. Yes. It was really cool. Um, some other maker news. So, uh, let's see, it's end. Um, last week we debuted. Oh, debuted. I, we showed a, a hot make and it was the, the, a face and dice tower. And it was something like this one. And so I, I loved it. When I saw it, I thought it was phenomenal. Um, so I went and found it and I printed it obviously. So it prints in two pieces so you can put it on your, uh, Prusa, your under three. Um, it's not that big really. So it'll print on a lot of the smaller printers. Um, um, in two pieces, which is really cool. And I love the, let's see if I can show it. I don't have auto focus on right now. So it's hard to show it, but the staircase down the center is, is really awesome. Uh, it printed really good. Um, this is actually printed in, um, what is this co-ex, black amethyst. I believe that's what this, this filament is here. And, and, uh, Sean, that's funny. This is the top of it here. And this is all with no supports. Um, David Houghton printed this for his son. Nice. This was printed all with no supports. And I really like that they did that. It has these three, uh, holes here and it just pops on the, uh, top like that. I actually started out in this color and I thought, you know what, the color was going to be sweet. So I changed it up. Uh, nightcrawler, I print my co-ex at about 220. Um, and that's PLA by the way. Um, yeah, no supports at all. This was actually done on the end or five. That's right behind my head, but I'm dialing it in and I need to fix my cooling. There was a little bit of, um, weirdness in some of the overhangs, but I need to dial in the cooling on that thing or throw a duct on there. So it's better. But, overall I thought it came out really good, but the reason why I wanted to bring this up is because, um, fates end is actually doing a Kickstarter. And I got to tell you, this thing is awesome. They, they're killing it on Kickstarter. And let me see if I can pull it up real quick for us here. Uh, here it is. Boom. I'm going to give it the full screen. So this is the fates end Kickstarter here. Um, as you can see, uh, they're, they're killing it. They asked for $6,000 to get everything rolling right now, currently, and this has gone up. Uh, wow, it's gone up a good chunk since I looked at this earlier, but 32,739 dollars originally, um, this was only going to be 14 dice towers. Uh, plus whatever comes, you know, after, if they were only get the 6,000, they would have done 14 dice towers. All of these are going to be, um, high resolution STL files support free. And if you scroll down, they were fully funded in less than two hours, or she was, um, Kim here, she's awesome. 64 backers already. Um, you can actually buy, you can back this so you can sell this model. And it's actually really reasonable. I think it was like 200 bucks or 250 bucks or something. Um, 275 maybe, and then you can print them and sell them and paint them or whatever you want to do. Um, I jumped in here for, I don't even see mine anymore. I think I was 33 bucks or $38. Um, but it looks like that one already got, yeah, $38 is when I pledged. Um, already got sold out, but the cool thing is if you scroll down on this page, um, they show you renders of, or she shows you renders of, and now you get all of the stretch goals and we're about to hit this next award here. And I just thought, you know what, all of these are going to be printable with no supports and the towers themselves look amazing. If you look at this one here, uh, I love the dragon around it. I love the, um, um, roots or vines around this one, I mean, all of them are super cool. I don't use them for dice, but I definitely would display these. So check this out. It's called fates and 3d printable dice towers. When I'm done, I'll put the, uh, link in the description because I didn't get that far yet. Um, but I mean, I just think they're, they're smoking. I really. And see if I can do that. There we go. Hey John, Matt K Paul. Um, so what do you guys think? Do you like this? Specific, uh, Kickstarter. I mean, I think she's killing it. I love it. Wife's doing good. Paul. Thank you. Um, let's see. Nightcrawler went down in temp. Okay. Nice. Good job. Hey, anything you think prints good. That's what I would do for temp wise. I love. To 15 to 20, usually to 20 on mine. Um, let's see under the roof. What did he say? Oh, the roof. Hole in the top back. What was the question? I didn't see the question. I'm sorry. Oh, the dice going. I'm sorry. Yeah. Yeah. So. See the hole right here. So it goes in that hole and you can print this bigger for the bigger dice. And then it goes down the spiral staircase here. And then it comes out right here. So that's where your dice go. So it's pretty cool. I don't have, you know, I don't have a die anywhere near me or otherwise I'd show you, um, how it works. But. Oh, it's just the top. Good. We're good. But I thought that was really cool. I wanted to share that with you guys. Um, fates and, uh, what dice tower, I just loved that. I thought it was a really cool print. Um, I backed them because I wanted to make sure now you can get this particular one for free right now. The STL is out there. It's on the thing averse. Um, so if you want to check it out, check it, uh, you can definitely do that. Um, the next thing I wanted to talk about quick is, uh, one of our own peeps in the house. Um, Thomas, the 3d print Viking. He's working on, uh, something new coming up. And if I can find it, let's go see here. Well, I thought I had it queued up, but apparently I don't, but we're going to pull it up. There we go. So, uh, Thomas, the 3d print Viking is, uh, raising some money to build a 3d printer. Um, I think it'll be a really cool build. And if you want to check it out, see, hopefully that looks okay. This whole, uh, one, there we go. Perfect. Um, jump on Twitter. Check out, uh, Thomas the 3d print Viking and, uh, help them out. So all you have to do is, uh, click on the link here. It'll take you to the go fund me account. Um, where you can do your donation. Um, I look like Chris Riley. Uh, you know what, let me jump in here. I think Chris Riley, he did, uh, a thousand here. Let's see if it lets me do this. I'm going to match Chris Riley. So I'm going to, um, not do that on the stream. What I'm going to do is when we get off the stream here, I'm going to figure out why it's doing this. And, uh, I'm going to match Chris Riley's donation for Thomas. The 3d print Viking. Because he deserves it. It's going to be a great build. I can't wait to see what he does with it. And, uh, it's going to be awesome. Um, you can donate anything you want. It is a go fund me. So the money goes straight to him. And, uh, we'll check it out, but I'm not sure. It probably is reflected in my glasses. Um, unfortunately, no, it didn't flash anything. It's just like, gone. Later, Paul, I'll have to, now I'm going to have to take the stream down because I have a credit card flash in there. No. Um, anyways, we'll work it out. We'll figure it out, but I will match you. I will match Chris as soon as we can get that to finish. Um, I'm not sure. Yeah. I'm not sure. Maybe the card, maybe the card numbers wrong. That's a good point. I'll check that out. Um, tip him with his own money. Yes. Crap. Uh, let's see. What else we got for you? I'm getting blown up here. Oh, nice. So go out and support Thomas if you can. And have a little fun with that. Um, I'm not sure. I'm not sure. Maybe the card, maybe the card numbers are wrong. That's a good point. Um, the next thing, let's see if I can open it. Boom. There we go. I think my, uh, didn't realize it except discover. Gotcha. I have to look. Maybe that's the problem. Um, anyways, next up, we got a few minutes left and I thought we would jump into a hot or not. All right. This is my hot or not for the week. Um, I thought this was a really cool. I tell you what, I'm going to give it full screen because I'm the only one here. So I thought this was a pretty sweet thing. He, this person is doing 3d printing, uh, fishing lure molds. So they're making the molds, um, with a 3d printer. And then they are finishing, um, uh, you know, with that mold. So I started reading through this and looking and it looks like he does a whole bunch of different ones. If you actually check it out and I just thought, what a great idea. And I don't want to hit play on this because it might, uh, hit copyright and then we'll be in trouble. But as you can see from here, a whole bunch of different molds and it's really a cool idea, especially in the, um, you know, climate we're in right now where a lot of us would love to go fishing or some of us are going fishing because you can socially distance, uh, while you're doing that. But, um, you know, I thought this was, this was a great idea. Uh, you can make unlimited, you find one you like, you make a mold of it, and then you can make as many as you want. What do you guys think, uh, hot or not? There you go. Christopher cocky. Um, revamped outdoors. There we go. Um, nice hot. Everybody's saying hot. I love it. Husband says hot. Thanks, Sarah. I think it's stupid, but my dad will love it. Yeah, revamped outdoors shows how he makes it. That's right. I believe that's who did this. Uh, I have to look again. I'm sorry. I did. Double check where this video came from, but, um, nice. Later, Tony, have a good one. I just think it's a really cool, um, my buddy's idea. You know, Sean Butler says his buddy's been pouring lures in a 3d printed mold for about a year. That is awesome. I mean, it's a great way to make them and you can, you know, endlessly do them. You can do any colors you want. You can reprint the mold when it gets worn out. I mean, why not? Yeah, everybody's ready to go outside. Uh, sweet B says hot. Yes. Without a mask, Sean. Amen. Uh, but yeah, I thought, I thought that was a really cool thing. Um, as far as another great way to use 3d printing. I just, you know, it's, it's cool. I like it. Here we go. But yeah, uh, so we got a couple more minutes here and uh, I know Pooch had to bail early today. He has a meeting to get to. Hopefully he's with us the whole show next week, but don't forget to hit, hit us up on Twitter at hashtag hot makes. Um, we will find a way to count how many are done over the week and make them quality good ones, you know, and we'll see if anyone can beat Chris. If not, uh, Chris is going to win at his own game next week. And, you know, we'll give that prize away. Um, anyway, but go. I used to, I remember we used to go places. Yes. So hopefully by next week, I dial in my screen a little bit better. So I'm not like all over here, but, um, yeah. Yes. Yes. Get us Easter bottle hunt. I like it. Uh, question everyone, what is the best inexpensive way to dry your filament? Um, you, you need to dry it or keep it dry. A lot of people like the oven, if you be careful. Um, a lot of people like, um, dehydrators. If you grab a dehydrator, you can modify that. There's some really cool videos on that. Um, otherwise, if you need to keep it dry, you can get it in a container with some, some good, um, silicon. I can't even say it packets or they sell it in bulk. If you can get it from Amazon now. Um, dehydrator. A lot of people are saying it food dehydrator. You can find those. If you get lucky, you can run to like, uh, if they're open in your area. Um, a lot of people find them at Goodwill or, uh, say Veniz or one of those like secondhand stores. A lot of people find their dehydrators there and then repurpose them. Desiccant. There we go. Thank you. I lost that word for a minute there. Very cool. But yeah, I think, uh, you know, I really appreciate everybody, uh, for hanging out with us on a Monday. I know, uh, you guys have stuff to do and you're probably busy at home. If you are stuck at home, um, there's always something else to do. And we definitely thank you for coming in. Um, yes. So, hold on. That's pretty funny. They're all closed there. Okay. Uh, I have to look here. I'm pretty sure they are here too. Um, but you can, you can grab one from Walmart. I think if they have them, um, I'm pretty sure they do, uh, Amazon, any of those places too. And, um, what about the mod squad? I like it. I'm working on that. I'm working on that. Hashtag. Mod squad. I like that idea. That was a 3D Jimmy idea. I think. Um, and I do, I did like that idea. We're working on that. Craigslist. Craigslist, uh, face Facebook marketplace might have some out there. I should look. That'd be a really fun video to do. Um, I know a lot of people have done those videos, but I would, I would like to make one anyway. Um, yeah, the delivery date would be rough on Amazon. You just never know. I ordered a projector mount for above me. And it says may something, which is not good. Mod squad. That's awesome. But, yeah, we definitely appreciate you guys hanging out with us. Uh, you know, we appreciate you coming every Monday here on the edge of tech to watch a little hot makes. Um, hopefully as we keep going and as the pandemic, uh, hopefully slows down, we'll get more and more time to start developing the show again. Right now it's kind of, um, you know, we're doing what we can do, but we're not putting a ton of extra time in to, to do a lot of new stuff because we don't have the time, but we're definitely going to. So bear with us. We're going to get that rocking and rolling. Mod squad might happen here in the next week or two. I just got a, I got to get people out there to tag or send video or photos or videos or something. So that's going to be a, um, a, another challenge, right? Um, but, uh, yeah, we'll definitely try that. That'll be a fun, fun, uh, feature and, uh, 3d print Viking. No problem, man. I hope you great. I hope you get to your goal and I hope you can build a pretty awesome printer and show us all when you do it. And, and I know you said it'll be all out there for everyone to do it. So that'll be cool. Um, thanks 3d Jimmy. I appreciate that. They had toilet paper. Um, nice. Yes. I have a feeling hot makes will explode this week. I hope so. We definitely get them out there and Chris does, uh, Chris and everybody else attacks does a great job. Um, it's just funny cause Chris, he's always looking. He's seeing the cool stuff and he's tagging. And I love that. And it's, it's really cool to see us see all of the tags that come in. Um, the retweets we kind of ignore because they're retweets, but, um, let's see, Sean Gould, you ride bicycles. I may throw some models out if you do. Um, I have a bike. It's sitting right here. Actually. Um, I definitely would love to ride more. It just needs to get warmer here. So let's see those. Let's see the models. Let's check them out. Um, I'd love to see them, Sean. But yeah, thank you guys so much for spending a little time with us. A whole hour right here on a Monday on the edge of tech and, uh, right here with the hot makes show. Hang out with us next week and we'll have some new stuff. Maybe even a guest. I think we're going to bring a guest on next week. So come hang out with us and have a little fun. I really appreciate it. Like I said, seven times now. Thank you guys so much for coming. We look forward to seeing you next week. Everybody have a safe, uh, healthy, great week this week and we'll see you next Monday. Um, functional bikes mods. I saw you, Sean. Thank that. Let's do it. Um, but thank you guys. I really appreciate it. So, uh, Lindsay has dinner ready. She has texted me that I have five minutes. So I'm going to get moving, but thank you. You guys rock. Peace out. Keep printing.