 Good morning youtubers thanks for tuning back into the channel today. Well it may not be morning for you But it's morning for me getting ready to start off the day We're getting ready to head into work and work on our ram 3500 cab chassis build again We've got some neat stuff going on for that. We're gonna do some fender trimming We're gonna be installing some fog lights custom wiring for that one and putting on some tires We had Ron working on those for our Toyo mud terrains that we've got going on these things big meaty sons of guns And this thing's gonna be a kick-ass thing. We're gonna get it done today. So you guys stay tuned Are you listening? First things first customer opted for us to do the trimming on the inner fenders because as you can see it It actually sticks down quite a bit below the fender level and out So when you see it from the front, it just that don't look right So we're gonna get a nice even line that cut straight across from here follow the Line of the inner fender down here. You guys can see From here straight up pretty much across to the corner make it nice even so it follows that Angled edge of the bumper in the same time So we're gonna be doing that one now mark it and we're gonna cut it with our New saw saw that we just picked up today. Let's have a look at this thing. This is My new Milwaukee M12 line fuel a little hex hex all her. Yeah, hex all Came with a 4.0 Battery for it. This thing's pretty badass. I've used it just a little bit this afternoon and the thing eats It thing is a pretty Pretty nice. It's compact enough to do what I need to do I didn't really want to use one of the the round cutoffs just because I wanted something nice and straight and even so This is gonna be able to do that for us So we got the inner fender all cut out So now I'm just gonna kind of take a nice hair real quick and we're gonna trim that Interfender to get all the fuzzy stuff off, but looks a lot more nice and flush Next up we're gonna be going with the fog lights We've got a couple of different ones here. We've got one of these pairs from rigid It's gonna be a really cool spotlight So we've got a pair to go on each side inside the little flares of the bumper. We've got one spot Cube and then we're gonna have one full Full the flood style cube the spot We're gonna put on the inside portion right here and then the flood we're gonna put on the outer So it gets a lot of nice ambient light out towards the outside of the vehicle and then as you can see up in here Up there in the bumper There are nice slots that are already in there for the fog lights to be mounted The last thing that we're gonna have to utilize is we want to utilize the factory harness for the fog light system So we can just plug it right in and if we need to unplug stuff in the future That's where we've got a test point at so then we'll be able to have those all plugged in nice and neat And then our factory ones which are just kind of hanging out here now We'll be able to be tucked up nice and neat up in the bumper with a factory harness. Let's get the wire in that So one of the lights that we had come with a nice set of pigtails for it the light We've got here. We're going to be wiring our female Connection in on we cut the ends off and then we've got some nice butt connectors with some heat shrink and solder point In the middle of them these things are really nice to use in a pinch like this one And then on the Side that has the harness for the vehicle We're going to have the male side of it that we're going to put this connector on so We'll have each of the pair of fog lights together here fogged on to or plugged into one connector So we just got to unplug one connector for those two and that's for the whole side You're going to have one connector per side. That'll be uh, that'll be how we'll run this one So we'll get soldering these on now We've got all everything connected here as you can see our Heat shrink with solder that's a low temp solder With a butt connection in there if you guys haven't used these before they're kind of pricey They're about a dollar piece that you can get through like a tiff code dealer And but they save a lot of time and they're super strong I know jrc 54 did a review on some of the as seen on tv versions of those last week and these things are like Tons above in the uh quality aspect of that one. So those are really nice and then on The factory side of the harness here We've got our male connector, which is going to be this one right here So we're going to put the same thing to put these two together So we've got we'll be able to have our factory style harness that'll plug into our factory connector Right Here which will plug right into that harness that we have already existing in the truck So if you have any wiring diagram issues down the road or somebody else does They can follow the same wiring diagram to get to the fog lights just like they would need to Now I know we're gonna have to get these things all lined up after the fact when we get them all hooked up and lined up down the road But I think these things look damn good. We've got the spot There and then the floods on the outside to illuminate everything in the peripherals I think they turned out pretty darn good. That's in the factory spots for that grumper Looks pretty darn good guys now. We'll get the uh wiring harness and we'll get the other side in Now after getting the wiring harness all nice and routed up into place we've got it zip tied up into place up in The fender well here and goes up into the frame and then across the front bumper and it actually goes into the front channel Inside of this area of the front bumper. So it's all tucked very nicely inside of there We've got the excess harness up in there And then as you can see our electrical connector is a factory electrical connector tucked up in the frame and the electrical connector for The fog light on this side is zip tied up above in the Fender well as well And then we've got our fog lights all nice Mounted up here. We still got to do some aiming for those But they look pretty darn good and the best part I tried to mount and With using two fog lights On either side it does not set a lamp out indicator So it must use enough amperage To be able to keep that indicator from coming on And we're gonna get these things aimed up and see what they look like Now last piece of the puzzle we got our fab fours bling to be putting on Well, I'd say this kind of sucks, but it's super fitting that it should Start this build in the cold and shitty weather of Ohio and it ends in the cold and shitty weather in the Realm of Ohio it kind of sucks, but here it is. We got the nice walk around going here The only thing that we wanted to point out was when you order the kit from fab fours, you do need to order a Kit for the plug stops for the front sensors if your application does not have the front park sensors The other thing to notice is that the front park sensors There are six holes in the bumper and the kit for some reason only comes with four of them Which I don't really get that one, but that's how it comes We got all the fog lights everything all lined up in the front The only thing that I'm going to recommend to the customer is possibly matching with the set of led headlight bulbs as well That'll be something really neat that I think would just fill out the whole project altogether But all in all this thing turned out absolutely freaking awesome with this customer working out in the oil fields of west virginia This is going to be something that's going to be really awesome looking. It's going to be super capable It's going to be able to get him anywhere off-road that he needs to go these toyo mud grappler tires They are mud terrain tires. They just they are super meaty They're not really meant for a whole lot of great road use, but they're going to grip and rip off road He's going to be able to take this thing wherever he wants whenever he wants it isn't going to matter That and being a nice laramy addition He's going to get there in a little bit of style the hillsboro bad turned out really awesome We really like what they do for a product. It turned out really nice from our upfitter And then that grumper is not something that you guys normally see So it was something cool that we were able to show you how to it goes together How to custom fit it Get everything fitting just right into place. It turned out really nice If you guys enjoyed the content that you guys saw today Make sure you guys scroll down hit the subscribe button on the channel I try to come out with some awesome content like this as often as absolutely possible Make sure you hit that bell notification So you get notified when I come out with some cool awesome content for you guys to enjoy Make sure you hit the like button if you liked it Thumbs down if you didn't either way I'd like the feedback just to see how i'm doing another project in the books And I appreciate what you guys have been doing for the channel lately Just cleared over 11 000 subs. That is something that I didn't expect to get to We also have some shirts available for some channel merch over at teespring I will put the link down in the description below on that one Also, make sure you guys stay tuned this coming weekend We're going to be going up and visiting big ol jrc 54 doing a live stream with him Doing some question and answer for you guys on the difference between independent shop life and dealership shop life So stay tuned for that one. It's going to be something awesome. I appreciate it again. Thanks guys and you guys stay awesome