 Hey everyone, this is Charles at Cobb Tuning. Today we're going to be going over the main menu of the access port and the different options that you have to choose from. Hi everyone, so this is the main menu of the access port. It may vary from model to model, but this particular one is for a Subaru. We'll start off with kind of the help menu. This will be information about the access port, so anything related to the firmware, serial number, etc., is going to be located here. Down below we have the setup menu, so you can change from metric to standard units. You can go from miles per hour or kilometers an hour, change the language. It's all done here, reset to defaults. We also have our gauges, so if you want to monitor what's going on in your car in real time, it's all located here. Performance, so you can kind of measure the acceleration and performance of your car from this menu subset. Troubleshooting, so if you've got any kind of check engine lights that have popped up, you can view those codes from here. The tune section, so if you need to change the tune from stage 1 to stage 2, change octanes, that's done in the tune section. And last but not least, we've got the uninstall menu, so if you need to take your vehicle back to stock, you would do it from here. Hey everyone, thanks for watching the video. Again, if you have any questions, feel free to give us a call. Our number is 866-922-3059 or email us directly at support at CobbTuning.com.