 Γεια σας και καταστασία! Είμαι Vicky εδώ, με Creative, που θα δοκιμάσω 8 κατάσεις με υποχρονόματα από την Αγώνα Ριλής, από τα πιο καταστασία μου. Για την πρώτη κατάστα, θα χρησιμοποιώ χαρδίες παίμπες, αυτό είναι έναν αυσολό αγαλύτερο από αυτή's αγώνα, και ξέρω ότι θα έχεις πολλά αγώνα, αν αγαλύτες εμπανιστές, μπορείς να χρησιμοποιώ τα πιο καταστασία σας, για να χρησιμοποιώ αυτά τα πιο καταστασία μου. Θα χρησιμοποιώ τα πιο καταστασία μου, και θα δοκιμάσω στο χρήσι πλάτο εμπανιστή. Δεν θα χρησιμοποιώ κάτι εξαιρετικό για τα πιο κατάστασία μου, Damn those two companies that I picked up, a red and a brown one, κατάστασία μου. Την πρώτη θέλη, π μπορείς να δει ότι έχω αναγώθει τα πιο καταστασία, στην η μεγάλη σπιωση μου, και αγώνας με την πιο εξαιρετική. Α άλλη θέλη είναι να αντιμετώ και αυτοί τα κόλου της σκέψης της πέτας και then βλέπω τα κόλου με τη σκέψη σου. Τώρα θα κάνω αυτές τις τέχνοι, επίσης και επίσης, για να κόλω όλα τα πόπι, ουσχυρία για κάθε και κάθε κόλου. Εκκλείωσο σκέψης και κόλου, στέμπες και λεπτά, και τότε θα κομμάσω όλα τα πόλια με τα μπράσματα. Εκκείωσο χρηθώ ένα από τα νέα πόλια, αυτά είναι τα μεγαλύματα σκέψης, για να κοψω ένα κομμάτι, δεν θα κοψω για ένα κομμάτι αυτή η ώρα, αλλά ήθελα να έχω αυτή η ώρα, που μπορώ να νεστεί στον πόλεμα και τα λεπτά μου. Λοιπόν, χρησιμοποιώ ένα βασικό κλου, στο κανένα μου, και είμαι πραγματικά να δοκιμάσω με νουβουδελούξ, και τότε θα σημανω τα πόλεμα, αυτή η ώρα με αφήνες τάπιες, γιατί έχω κάποια δημιουργία. Η μου σημανή μου είναι από αυτή η ώρα, ο οποίος είναι γνωρίζει από εγώ να εγώ σου και εγώ σαν τα κάτι που γίνει με νέη την τομή μου Τώρα μου θα πω μιλίτα για το λεφ και θα τα αφηκατισβωθώ μια σπεφη μαύρι στην κίνη έτσι θα τα βηχάω μέσα στο νομισοφύρο και δε θα έχω κινέα φόμεις κορσικές μονατές για μια δύνητα τώρα θα valeur πλ οι όνειες μου για να βρήξω έναιχελ με μόνο εμπ-αμπονί για χρέα ξεχώ και την μου βασίση του εμπ-αφηκώ Για την next card I'm going to use the puzzle cover-up die. This is from the August release as well. You can see that it's going to cover up your card front. I went ahead and cut out a few of those puzzle pieces from a patterned paper and I picked up different colors that match nicely together. I'm adding foam square at the back and I'm going to stick down three of them connected and one of them is going to be dropped a little bit off as if it is missing from the puzzle. The idea here is to create a miss you card which is a clean and simple that you can send to both a male or a female. Here I'm adding glue at the back of this piece and this is going to lay completely flat. Now I have used the miss you die. This is a free with 60 from my favorite things. I'm using white glue at the back and I'm going to stick it down. Now I don't know if you can tell from the video but these are quite thick so they have enough dimension to stand out and that's just because I cut out the word many times out of white cardstock and I stuck one on top of the other. So it's like chipboard at the moment. Now I'm going to stick everything down and my card is finished. Nice and simple but really cute. For the next card I'm going to use the rolled rose and the ground greenery dies and I'm going to play with felt today. So I have grabbed my Hitka by Sizzix. I'm going to place it aside and let it warm and I have picked a few colors of felt which I'm going to run through the Sizzix machine with my dies. Now I wanted you to see that these thin dies really cut out felt beautifully and I'm going to run it once and it should be cut out but out of habit I always like to run it twice. So I'm going to peel off the rose and then I went ahead and cut out a few more roses as well as a few leaves and I'm going to put this rose together. This is going to be quite dimensional so I'm using my tweezers and starting to roll from the end of this die cut all the way to the center. It is really easy when you use your tweezers. Just make sure that the bottom line is completely flat. When you reach the end just add some white glue or in my case my new glue gun and I was trying to find an opportunity to use that. The glue gun I'm using is by Sizzix. It's a brand new product and I have unboxed it in a previous video but I like that there are those silicone finger caps available so you don't get any finger birds and I also love the tip of this glue gun because it's really fine. Now I have prepared all my flowers and all my leaves I'm working on a panel and I'm going to stamp my sentiment which is also from the new stamp set with sentiments that's called from me to you and I went with the sentiment that says from me to you on your birthday so this is going to be a quite dimensional card as you can see I'm sticking everything down with my glue gun and I'm not planning to mail this card since it's so thick. When I make such dimensional cards I always like to hand them out to close friends and family that live close by on their birthdays along with their present. So now I'm going to tack those leaves underneath the flowers I used white pearls for the center of my flowers and I mounted this white panel on top of a blue card base that match perfectly the color of my leaves. Now this is the fried fully sweet super adorable stamp set from the latest release and for my card I will be using the little bunny which is fully dressed up for Halloween I am using my Prisma color pencils to color everything and I'm working on Bristol paper I'm going to keep my bunny pretty much white but I am adding touches of oranges and purples to match the Halloween theme Once I have colored everything I will use the matching dies to cut out my bunny and as always I will have to cut off the part where I am coloring the images especially for videos where I am sharing 8 cards in one Otherwise the video is going to be super long Now my bunny is all colored and ready to cut out and I'm also going to cut out a window out of this orange panel So I have a pouch that fits inside that window and of course I'm going for a shaker card I always need to share at least one shaker card when I'm sharing a bunch of cards So now I am adding some double-sided tape all along this pouch I'm going to peel off the backing and then place my window on top and my pouch is ready in place Now as my card base I'm going to use this black cardstock and I'm going to place on top of it some Halloween mix sequence These are from Looses Little Things but I got this mix last year and I don't know if it is available still I'm sure there are more mixes for Halloween cards available in the market I will make sure to link some below Now I'm going to place my window on top At the back I used double-sided tape around the window as well as white glue So everything is nicely secured there Now I'm going to stick my little bunny and I'm combining white glue as well as foam squares So it is leveled with the window which is quite raised Now from the same stamp set I have already prepared my sentiment This is Hoppy Halloween which I have white embossed on a piece of purple cardstock and I'm going to place it underneath my bunny just to ground it somehow so it doesn't look as if it is floating and my card is ready Here's another new stamp set It's called Fluttering Friends and I will be using this for my next card This is one of my favorites another favorite from this release Now I have stamped two of the dragonflies as well as a bunch of other leaves and I'm going to use my Prisma colors to color everything since I already have them on my craft table from the previous card Now I went with blues and yellows for one dragonfly and with yellows and oranges for the other one and I used the matching dyes to cut out everything what I colored all the images Now I'm working on my background panel and I'm going to apply some Distress Oxide ink through this stencil This is from the new release and it is called Captivating Mandala It is a gorgeous stencil and I think it makes a perfect background I'm using one of the new Distress Oxide ink colors which is the Tumbled Glass Nice and Light and it's going to provide the perfect background for my dragonflies Now I'm going to go inside where everything is going to go and then stick everything down and as always I'm using Foam Squares for some of my images and for others I'm going to use white glue just to have some dimension I white and post my sentiment on a piece of black cardstock and this sentiment is from the same stamp set as the dragonflies To finish off my card I'm going to add a touch of sparkle on my card and here are some photos of the finished card For the next card I will be using the birds of a feather Dyset and I'm going to cut out two of the birds that are facing each other as well as I'm going to cut out some leaves from a new Dyset that I used in a previous card the one with the leaves I'm going for a card which will be suitable for weddings and I need lots of them So I'm going to cut out the leaves from the volume I cut out the birds from a silver cardstock and now I'm going to work on a white panel to stamp my sentiment I'm going to stamp it with VersaMarking and then emboss it with silver embossing powder So everything is going to be quite monochromatic and very elegant I picked a sentiment from the stamp set which is called from all of us which is packed with sentiments and I went with the one that says congratulations from us It's going to end up quite shiny and it's going to match perfectly the birds Now I'm going to put everything together So I'm working with white glue and I'm going to create a little greenery at the bottom where my birds can nest on top So at the moment I have a little bit of a gap at the center which I'm going to fill in later once the birds are in place I used foam scores at the back of my birds to add some dimension and now I'm going to add some white glue at those little cutouts which are actually the wings of my birds You can leave it as it is quite simple but I decided to go ahead and stick them down and since this is a wedding card I just have to add a little heart and now I'm going to finish off my card by adding some greenery where that gap is between those two birds just add one more leaf there I also created my card base out of silver cardstock which is going to add a lovely border around my panel I'm going to stick that down and my card is ready For my next card I'm going to use a captivating mandala but this time in a die form so from this release you get the same design into a rubber stamp which is quite big into a die which I'm going to use now and into a stencil which I used in a previous card I cut out the mandala twice from different colored cardstock and now I'm going to use some glue at the back and this is the large glue pen by Nouveau I'm going to stick down the yellow one and I will do the same thing with my blue one I think this is a gorgeous mandala and you can use it to create lovely backgrounds or focal points now I'm going to use my scissors to cut off the excess and you can always use the cut off parts to fill in the empty space that you have on your card I am not going to do that but this is an option I have cut out the word smile from a die that has been released previously I'm using some white glue at the back and I'm going to stick it down I used the same colored cardstock as the yellow one so it matches nicely with the elements on my background to add some sparkle and more interest on my card I am adding some big gems at the center of my mandala but smaller gems at the tips of the design now this panel is slightly smaller than a standard card so I chose to go with the yellow cardstock as my card base and I'm going to stick this panel on top this is going to give me a lovely border all around it's going to bring everything together and for the last card for today I will be using this stamp set which is called cut cuts I just cannot resist a cut stamp set but in any case in this release there is also a dog stamp set so it's worth checking it out if you are a dog lover now I'm going to stamp 3 of those cuts and I'm going to color them very quickly, very easily I'm just going to mainly keep them white I will add some pink on their cheeks and ears and then I'm going to use the matching dies to cut them out I have also used a circle die to cut out these 3 little windows and I'm going to cover them up at the back by using 3 different colored cardstock pieces now on each and every one of them I'm going to add that backing I like how nice and colorful it looks at the front and now I'm going to put everything together I'm going to tuck in those cut cuts on each window and I'm adding a tape runner at the bottom of the cuts they need to be nicely secured underneath and then at the top I have added foam squares so they are a little bit raised at the top I have also prepared the sentiment that says happy birthday which I think it is adorable I have white embossed it on a piece of black cardstock which I think it adds a lovely contrasting color and it is very readable and stands out and I'm going to finish it off with my NuvoDrops in 3 matching colors to the backgrounds of the cuts so here is the green one I'm going to add a few with my yellow one and I will finish it off with the blue I'm going to stick this panel on a standard card size that's 4.25x5.5 and my card is finished and these were all the cards for today I hope you had fun that you got inspired don't forget that I always link the products that I used down below in the description area as well as on my blog thank you all so much for watching today and I'll see you next time