 Γεια σας, είναι Fiki εδώ και καλώς ήρθατε back! Σήμερα θα κάνω ένα φαναγή και ευκολογή καρδιά χρησιμοποιώντας από σημερινές και σε αυτή τη καρδιά βρήκατε ένα σπίτι, 3 δυσκολογές του κακτι και μια μία χαρά. Θα χρησιμοποιήσω πραγματικά όλα όλες, δεν θα χρησιμοποιήσω την χαρά εδώ και θα αφήνω σε μια σχεδότητα μου να ξεχνάς να χρησιμοποιήσω τα πόδια μου. Τώρα θα χρησιμοποιήσω 3 δυσκολογές και όλες τις δυσκολογές του κακτι So I'm going to use this white cardstock and this is actually a watercolor paper and I'm showing you here which pad I'm using for watercolor and I'm going to make sure that I will leave a link down below in case you are interested. I'm actually going to cut out everything from the smooth side of the watercolor paper but of course you can use both. I am placing all the dies on top and I'm actually using here the magnetic platform so I'm going to run them through my big shot. Λοιπόν, υπάρχουν δύο διαφορετικές εργασίες της CISIX. Το ένα είναι στο USA και το άλλο είναι στο UK. Και έχουν διαφορετικές συμβαίνεις, και κάποια διάφορα συμβαίνει δεν είναι αυτοσυκλέτας σε κάποια φορά της κόσμου. Και αυτό είναι το κανό με αυτό το διαφορετικό. Αυτό είναι ευαίωτικο, εύκολο στην Ευρώπη. Και θα αφήνω τα βιντεία κάτω από εκεί, για να βρείτε πού μπορείτε να βρείτε. Και αν βρείτε στην US ή Κανδανία, μπορείτε να το όρθω online, αλλά θα αφήνω να αφήνω τα σύμβαρνα βιντεί κάτω από εκεί σε πρόταξες που μπορείτε να φτιάξετε μία μία μορφη. Λοιπόν, έχω κομπιέσει 4 φορές. Αν έχω την κακτηρία μου για να πω. και έγινε να πάω με ένα βασικό λογό για σήμερα και αυτό είναι why i'm going to use my nuvo aqua flow pens. Αυτές είναι καλύτεροι, εγώ really love how they flow, they are really juicy if you press them and i'm also going to use a watercolor brush this has a barrel and a nice tip and it's always wet so you don't really need to dip into water and in the back cuts you actually get two different watercolor brushes with two different nips one is a fine tip brush and the other one is a medium now i'm going to show you how to start them you need to get rid of that yellow ring you need to open up the bottom barrel and then fill it in with water then you need to place everything back in make sure that you screw the tip nice there until you hear that click sound and you are ready to go and you don't really need that ring anymore so this size a waste now i will go ahead and start coloring remember i'm working on a watercolor paper and that's why i do end up having such a nice blending with my colors now i am adding a little bit of color on one side of the flower pot and then with my watercolor brush i'm going to move the color all the way towards the other side this way i make sure that i have darker and lighter areas and you can go ahead and walk it out as much as you like i am going to make sure that it's not as light at the top right corner as it looks now and now if you are wondering what i am doing with the brush when it's not on screen i just have a tower right next to me and i make sure that i clean my brush there so i'm just going to bring it in for you so that you can see what i am doing now i have moved on to the orange and again i'm using the same technique apply a little bit of color on one side and then with my water brush i'm going to move it towards the other side so as i was coloring today and as i am doing the video editing and the voiceover at the moment i do have my air conditioning on it's really really hot here in greece at the moment we are in the middle of a heat wave it was 40 degrees today it's like that outside you can't even breathe and that's about 104 fahrenheit i believe and i do need to have the air conditioning on so i hope it's not very distracting for you and you can't really hear that sound so anyway i will continue coloring my flower pots using the exact same technique it's and it's going to be red or this is going to be yellow and the next one it's going to be blue so i'm kind of following the rainbow order but just because i will have enough green for my cacti i decided to skip the green for my pots i will continue coloring the cacti now and i'm going to show you different ways to use those pens so instead of just blending out the color with your watercolor brush you can make sure that the image is totally wet so this is what i'm going to do here i'm spraying my cactus with water and now i'm going to bring in two brushes these are dark green and lighter green and i'm going to color directly on top of that water down cactus so you will see that i'm going to squish it nicely so this is going to be nice and juicy and i like when that happens and i'm going to do the exact same thing for the bottom half and then i'm going to make sure that they are nicely blended so as you can see you can keep those aquaflow pens to be quite dry on the dry side but if you squish them a lot of color comes out and they become super juicy which is something that i really love because you can actually use them in both ways like i did for the flower pots or for this cactus So i will continue coloring the next one and for this i'm going to mix two different colors so i'm going with this tl blue one and i'm going to use the light green as well and you can see how beautifully they mix together without effort at all so i'm going to speed up the video a little bit and i will let you see how i colored all the cactus and as this is happening i want to let you all know that there is a giveaway running on my blog at the moment and i will make sure to leave a link down below in the description area for the giveaway i do have the pleasure to give away one july card kit by simons stamp so make sure to enter the giveaway by the way i will post my one kit 10 cards next week So stay tuned for that and for the last cactus as you can see i mixed up yellow with that tl blue one and i did get a little bit of green when those were those two colors blended so i'm ready to go now i'm going to work on this piece of paper and this is actually watercolor paper again it's the same watercolor paper that i that with the one that i used for all those images and i want to create kind of a ground for all my pots to stay on so i'm going to mask to mask off the bottom of this panel and then i'm also going to make sure that i mask off the sides just because i used a rectangle die that has some stitching all around and i want to make sure that when i apply my inking it's not going to go outside that stitching line it has to do with being neat you don't really need to do that and for applying my ink i'm going to use a blending tool and as you can see on your screen i'm going to use this tres oxide ink and that's broken china which is a color that i absolutely love from the previous release now as i'm applying the ink down i'm making sure that i don't load up my blending tool with too much ink and that's why i get a nice blended outlook so mainly at the bottom i stayed with a lot of ink and as i go towards the top i don't have as much ink so kind of an ombre look now i'm going to spray water and you can't really see how wet that is but i'm going to lift the craft mat so hopefully you saw how wet that was i'm going to leave it for a little bit to oxidize and then i'm going to blot it with a piece of cloth so now it looks even smoother and as i am removing the masking tape now you can see a nice clean edge that i got at the bottom as well as at the sides now i am ready to assemble my card but first i'm going to add the sentiment at the bottom and for that i'm going to use the water celebrate that comes from this scissor die and that's actually available all over the world you will find links down below if you are interested so i'm going to look for the one that says celebrate i'm going to make sure that it's nicely aligned at the bottom and then i'm going to run it through my scissor big shot and as i am going to take that out you can see that the pieces that inside the letter b or the letter r are missing you can keep them if you wish to and stick them when you finish the card inside those empty spaces but i really want to bother with that i'm just going to leave it as it is because i think that it's readable and i'm just going to embrace that look so anyway i'm going to prepare all the pieces by adding some foam tape at the back and i'm actually going to combine two different foam tapes here so for all the flower pots i'm going to use those squares which are quite bulky and thick and i will get a nice dimension but for the cacti i'm going to bring in my foam tape which is by scotch and it's not as bulky as those squares and this way i can achieve dimension with different layers and since i have four different flower pots i'm going to place two of them on one side and of the card and the other two on the other side slightly overlapping one another so here is the first one ready to go and now you can call this card done or you can take it a step further just like i am going to do here so i'm going to use this thread and i'm going to tie a knot on the tallest cactus from one side all the way to the tallest cactus on the other side i actually did a double knot on its end and i also added a glue dot at the back just to make sure that these knots will stay put i used my scissors to trim off the excess and now i have the perfect space to add some banners which are actually going to complement the sentiment so it's going to be a celebrate card with some banners on top and just like i did for the rest of the images i used the same technique for coloring my banners and i'm not adding any new colors so the banners are going to be again the same red as the pot the orange and the yellow and i will end up using only three of those flags instead of four that i have cut out there and i'm going to make sure that i bent this string a little bit so i have a nice curve from one side to the other and for that i'm using a glue dot and then on top i'm going to stick the banners i am going to stick those with tiny little foam squares but again you can just use glue dots and they will keep the flags absolutely fine up there and i'm going with a black card base just because the card is so vibrant and i think that that black contrast is going to complement all the colors and at the same time is going to provide a nice base for that cutout sentiment so it's going to be readable even more now i'm using my ATG gun at the back applying lots of adhesive and i'm going to center it at my card base and that was the card for today i hope you had fun and got inspired don't forget that you can find links to all the supplies that i used today down below in the description area here are some close-up photos of the card that i made today and don't forget to enter the giveaway that is on my blog you will find links down below again thank you all so much for watching and for your lovely comments i am sending you lots of hugs all the way from super hot christ have a lovely weekend and see you all next week