 Hello, this is Laptop Media, and today, we will show you how to open the HP 250 G8 in what's inside of it. Once again, HP has decided to play their favorite game and has hidden most of this laptop's screws beneath the two rubber feet. After you locate and undo all 8 of the Philips head screws, turn the laptop around, open it and start prying the bottom panel off the chassis. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. For cooling, the manufacturer has used a very thin but long heat pipe. Thankfully, the sizes of the heat sink and the fan look decent. Our unit comes equipped with a pretty small 41Wh battery pack. Memory-wise you get two RAM Sodam slots, which support dual channel mode. According to some sources, they can fit up to 32GB in total. In terms of storage, there is one M.2 slot, which should fit both NVMe and SATA drives. Also, there is a 2.5-inch SATA drive bay. If you'd like to see more disassembly videos of the latest notebooks we would highly appreciate if you hit the like button and subscribe to the channel.