 Today, we take a first look at a brand new laser enclosure brought to us by King Gubby Designs. My name's Jim and this is the Edge of Tech. Desktop lasers have become so popular in the last couple years. I've done a bunch of videos on them, but the number one thing you can get for these things is an enclosure. The enclosures can help with taking those toxic fumes and containing them inside and then venting them out with ventilation, keeping them out of the room you're burning in. And that's super important. The other thing that these do is block the laser beam, which is super dangerous. It can blind you in seconds. You only have one set of eyes and you don't want to lose those. And that's the number one reason why I like laser enclosures. It's for safety. This brings us to the new laser enclosure that King Gubby Designs is selling and they sent me one to take a first look at. I'm super pumped to check this out. Let's do it. And there it is. This thing is huge and I can't wait to show you a little about it. The skeleton of this enclosure is super sturdy. It's a quick snap together skeleton and it features movable accessory rails that you can snap on anywhere on the enclosure. The enclosure is large enough to fit most of the main dial lasers on the market. At two feet by two feet by 20 inches tall, it leaves plenty of room for taller materials and even the rotary. It features two extraction ports, one on the left side and one on the top that allow you to connect your ventilation to. Along with that, it has two viewing windows, one on each side as well. If you want to take a peek inside the laser while it's burning. On the back right here, it features a power port so you can stick a power cable in or run a cable out from a power brick that you mount in the top. All of this stuff is awesome, but you know it's even better. The guys at King Gubby Designs keep developing upgrades for this thing. And you guys know that I love upgrades. So far there's upgrades for lights and USB holders and ventilation and that's just the start. One of the upgrades I'm most pumped about is this right here. It's a mount for the Wyzecam V3. This gives you great view of the laser if you want to check up on it without even opening the laser enclosure out. I'm out to mine way up in the corner, I ran the cables along the top and you don't even notice it's there when you pull this enclosure down. Now all of this looks like it's going to be great to use, but something that I really want to point out is that this enclosure has a bottom in it. It's not just one of those enclosures that you set over the top of your laser like this and then hope it works. And that really means something to me. I think this will help with keeping the fumes inside of the enclosure before that ventilation can suck them right outside. And that's very important because a lot of the things that we burn are very toxic for us and you definitely don't want that stuff out in your room or breathing it in. A fully enclosed enclosure like this with a bottom that zips and closes is my number one choice. If you're getting value out of today's video smash that like button and let me know in the comments below if you have an enclosure or you would consider using an enclosure like this for your laser. Also what kind of upgrades would you guys like to see for this? So overall I'm pretty impressed with this laser enclosure that King Gubby Design sent over for a first look on the channel here. I am super pumped to see what other upgrades come out for this thing. I think that's what I'm most excited about but I can't really review this until I start using it so that's what I'm going to do next. If you guys want to check it out there's a link in the description below that'll take you right to the King Gubby Designs website where you can find a link for that enclosure and if you want to take your laser engraving to the next level check out this video right here.