 Introducing the Vaughn Eye. Eye stands for interchangeable, which means you can take it apart and swap out various pieces for different colors and different materials. Those are coming soon. Super excited about showing this one to you? Let's check it out. The Vaughn Eye currently available in all titanium. You can take it apart and interchange the sleeves, which still rotate like the previous Vaughn design. We can begin by taking the tip off. The tip crown has been slightly redesigned to make it a little bit easier to grip, so you can grasp it between your fingers, holding the rest of the device, give a twist in a pull, and it comes off. The rotatable sleeve comes off the same way. Give a pull, twist, and remove. The liner also pulls out of the mouthpiece, and the condenser, well just like all of our other condensers, is easy to remove. The Vaughn Eye stem is comprised of these four parts. Mouthpiece and tip crown, liner, and sleeve. To reassemble your Vaughn Eye, begin with the mouthpiece. Notice the logo and the small notch that's been machined just by the o-ring. On the liner, you'll see there's a small little arrow. That arrow aligns with the notch in the center of the logo. Next, grab the sleeve. In the factory, we align the large end of these teardrops with the tip crown. Simply push and twist to assemble. The tip crown, same thing. Put it on the liner, push, and twist. Put your condenser back in on the mouthpiece side. Finally, the tip. Give a little push, a little twist, and we've just reassembled our new Vaughn Eye. The whole device now easily rotates nice and smooth on the o-rings that hold everything together, works just like bearings. To adjust the airport, twist either of the crowns, and if you notice, the logo lines up with the airport being open. When we twist the logo away from the airport, the aperture begins to close. The new Vaughn Eye with interchangeable parts. What colors or materials would you like to see first? Please let us know in the comments.