 Shabare 1000 here. Today we're going to be checking out this uh big sottering iron. This thing is huge man. There is some writing on it. I'll do some research on it. It's got a patent number but I'll do some research on it. If I find out anything I'll put it across the screen right now. First thing we need to do is plug it in. Look at this old this old plug now back in the day I know these these plugs they used to have a cardboard and just stuck down in there. Some of them had rubber. I'm not sure what year this thing is but we're going to go ahead and plug this in. We're going to see if this thing starts getting hot. Plugged in. Yeah this thing is huge man. Kind of overkill for what we're going to be soldering but that's okay. Oh yeah it's starting to get warm. Okay so I'm going to set this up here. Here's what we're going to do. I'm going to take this thing. It doesn't seem to be charging right and I'm going to make a mess here. So what I want to do is I need this end for her. I keep calling it a lighthouse. It's not lighthouse it's a windmill. So I'm going to solder it onto this thing so that way you know it can just be on. We can plug it in and it'll be on all the time but I need this end here. So I'm going to take this part up inside here. I think the batteries are probably bad in it is my guess. I did check them. They checked out okay. One was a little lower than the other so it's probably a battery issue but she really likes that light. So I'm going to get it to where you know it won't use much because it's got LEDs in it. So oops I'm going to get working for her because we take Bruno out several times a night and we'll sit out there with him and I'll have a cigarette or something and you know we'll just go out and hang out with him for a little bit. He likes that gets him out and she likes to look at her lights. So this will be this will be really nice. I'll just run a little extension cord over there and so move this over. I want to keep the solar panel because it is working. The solar panel is working. Get it out without damaging it. Let me see. This is a this is a glass solar panel so I don't even want to crack it because I may be able to use it for another project if I don't break it. There we go. Seems to be okay. So now we screw. I'll save the solar panel. Again it's not it's not a how-to video. It's just more like a vlog. I mean I will probably put it under some how-tos but I mean it's not really a how-to video. I may just be able to pull that. Now it's probably got an odd in it so let's go ahead and take this the rest of the way. Get it out of the way. This is a lot of times I'll tie an odd in them that way they don't don't pull through. It does have a good little switching. See it's got an odd right there. It looks like a bugger but it's not. We'll just set this stuff aside for now. This will go into my bin with my you know future with the future stuff. Now I need six volts and the power pack I got there it's a motor roller. It says 5.9 volts on it but I checked it with my multimeter and it is putting out 6.1 volts. So just perfect for what we need. So let's go ahead and get this trimmed back. Wires here, tiny wires that are already filled back. Now on here I think I've mentioned this before there's writing on one of these like this one here. I don't know how well you'll be able to see it but it does have writing on it. It does have a little plus so this will be our positive or positive one here. So we're going to go ahead wire this up again. I don't have any shrink wrap or shrink tape or shrink tube okay but it looks like it's getting hot so that's a good thing. Oh yeah I feel the heat so I got my solder here. Let's go ahead and tinge this if it's hot enough to melt this. I don't know this is a big ass. I mean yeah it's starting to probably could be cleaned off real good too so get the wire hot too and this over. I like this more on there let's put some more on it. So it's not pretty but it sure ain't coming off either and I'm going to tape these up real good. I'm going to take it outside and get it plugged in see if we like them on. It's not dark yet but that's okay. Actually what I like to do is I like to put these together like that. It's really the way they should be but I don't want this like pulling apart. I mean I know I'm going to have it taped and everything but that's better. This is just some of this stuff. Silver bearing rosin core solder. It is for electric cool stuff. Right hand so that's that's pretty good. So yeah it works like I said I know it's overkill for this little project but test it out some way right. I think it's kick ass. All right let me get some tape on here and get it taped up real good then we'll take it outside. Okay guys this is where this plug's in at right there. Now let's look in one of the windows here. Let's see if it kicks on. There it is. Awesome. Got a piece of wire covering that light but it should be all right after dark. It'll be okay. All right it'll stay on until she unplugged it but I may put it on a timer. We have a timer in there that we use for the Christmas lights. I may just do that. That way it'll come on at night shut off in the morning. So there you go. Got another little project it's kind of uh what do you call it? Yeah right kind of a review video but it's on something vintage. You don't see many of anymore. I'm sure a lot of you guys have seen a lot of them. I've seen a lot of them when I was younger. Hardly ever see them now and then this is going to shape. So stay tuned for that video. That should be my next video after this one. So anyway guys thanks for watching. Appreciate it. The weekend's coming up tomorrow's Thursday so you know happy April Fool's everyone. Hope you didn't get fooled too bad. I got monkey so that was pretty cool. I didn't get it on tape but anyway so all right guys again thanks for watching. Shea Bear the myth man legend. I'm going for now. Bye bye guys. Take care.