 All right, you guys just a little quick tip for when you have a piece that has uneven sides or just gaps Anywhere just You just want to put another smooth coat over it All you got to do is Sand it down with how many four hundred. I did four hundred because I didn't want any No, the gold to rub off especially when you have a metallic use an easier grit So give it a light sanding with a 400 grit wipe it down with alcohol Especially if you use anything like a Rezzy blast and then do a nice clear coat Flood coat ensures that everything's covered and you end up with a nice glassy And anytime you use resin even if you don't have any tints in it You need to make sure that you hit it with some heat to get all the little air bubbles out or you're gonna have Resin with a pour complexion You want to make sure you get the center? all of The Just right out to the outside first so that you don't pour push all your resin off and then you just kind of want to Work your way out work your way out Where it goes overflow It'll it'll self level Find its way So I make sure you have no dry spots Even need to run your hand around the edges After you work your way out to that side Adding a second coat also will deepen and brighten the colors at the same time with that even makes sense What do it one time and you'll see exactly what I'm talking about We have pushpins in the bottom so that we can get our hands under it easier and refer to this video On how to finish the bottom once your resin has dried more fire This one goes out to its new home on Monday If you want to see the video of the making of this piece check it out right here We need to have a sound effect like that like a cartoon sound effect You know like my doings well, I do but it would just be more professional doings No, like a cartoony Gotcha So now that it's a glass level we're going to set it in our Super-duper hyperbaric no dust or air chamber Or the other one First draft over there So yeah, thanks you guys for watching back