 Hi, I'm Gene Frith, owner of Frith Appliance and TV Repair. Welcome to Frith Quick Tips. As a service to our customers, we are providing quick tips about appliance and TV repair. I have been in the appliance and TV repair industry for 30 years, and I've just about seen it all. If you would like to ask a question, visit our Facebook page for Frith Appliance and TV, post the question, and we will do our best to answer. Did you know that there's not much difference between the modern-day digital TV that we have here and a computer monitor? And here's why. You probably know a little bit about computers, and you've probably heard the term mother board. And what the mother board is, it's a board like this, and the TVs, we call it a main board. And it has a microprocessor in it, much like a TV does. And if you notice this particular one has many different connections that you're probably familiar with on the TV, but you notice this here has a place or little connector for a TV, or I mean a computer monitor. So you could actually connect your computer to this and watch everything you see on the TV, everything you see on your computer, such as YouTube videos right here on your TV. Now, another similarity they have, you ever notice that sometimes your computer goes goofy and it's rebooted? Well, what that does, it resets the microprocessor, makes things to brand out of the box device and just reboots everything, starts brand new. Well, TVs operate in the same principle, sometimes they'll do funny things, which you can't explain, and you can't necessarily just turn it off and turn it back on, because there's always power supplied to the microprocessor, which you need to do in this case, is to physically unplug the TV, wait a minute, plug it back in, and this will force the microprocessor in the TV to reset itself, and this will clear up many problems. Look for more Frith Quick Tips on YouTube.