 Hello, this is Nick from Laptop Media and today we will show you how to open the HP Victus 1616R000. The bottom panel of this laptop is held in place by 8 Phillips head screws. After unscrewing them, you can pry the plate with a plastic tool. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. The battery here is a 70 watt hour unit and there is also an optional 83 watt hour variant. If you want to take out the battery, you have to pull out the connector from the mainboard. Then, you have to undo the 6 Phillips head screws that are fixing the unit to the base. The capacity of the battery of our laptop is enough for 7 hours and 9 minutes of either web browsing or video playback. As for the storage, the devices with Intel Raptor Lake H CPUs rely on just one M.2 Gen4 slot and the powerful models with Raptor Lake HX processors have two Gen4 SSD slots. The NVMe is protected by two metal plates and the top one has a thin thermal pad on the inside. Memory-wise, you get two Sodium slots. They support up to 32 GB of DDR5 RAM, working at 4800 MHz or 5200 MHz. As you can see, the memory sticks of our laptop are rated at 5600 MHz, but they operate at 5200 MHz frequency. The cooling solution looks promising. It comprises two fans and two thick heat pipes shared between the CPU and the GPU chips. The third pipe is dedicated to the graphics card. We can also see three heat sinks and three heat spreaders.