 kind of iffy. It works sometimes. Sometimes you got to mess with the trigger to get it to work. So let's take a couple of these and build at least one good one. This one is kind of iffy. This one here works fine, but as you can see, now this one's the same drill. It's got a good case. These two are hammer drills. This is not a hammer drill. It's just a regular regular drill. Also the arrows are different because someone must have had it apart before. That's what's going to be turning the other direction. That should be driving them in. It's taking it out. There's that. We're not going to mess with that other one. So this one works good. See that's that's the right way. This one wasn't working yesterday, but that's good because if you can see this right here, someone's had to get on it with a pair of uh channel locks or something to see that to break that loose to get it out. Now this one wasn't working yesterday for some reason. So it's got a better chuck. So you can still see the grip marks on it. You can still read that 700 series. This one just worn pretty much slam out. So well okay let's um let's find something else to do because I was using this drill last night. It does okay. It's just uh you know like I said sometimes somebody's had problems with the button before apparently they've switched something around because that's backwards. Um okay well I guess I just made this video for nothing. Well let's let's find something else to do. All right guys so what I've decided to do is try to take this apart. See if we can't fix that switch while it's running backwards. I've never had a DeWalt part before so I'm not sure how it comes apart. I think this may have to come off. Um I'm not sure these some of these are a little different than others to get off. Normally there's a screw down inside there. I see a screw down inside there to get these chucks off and it should be left-handed threads. Well that one very tight at all. Okay now I'm not sure how it comes off after that. So I may have to google this to find out. Find out how it comes off because I do know you can you can change these. This may have to unscrew. I see a slot here and a slot there for like a little wrench to go in. So let me get a get something a little wrench and we'll try to unscrew that. If not then we'll uh we'll go to google and find out because I'm pretty sure that this is going to have to come off for this case to split apart. So let me grab a wrench. So we got this out. Okay you seen that right. Now what it says to do says to insert an allen wrench and the chuck and tighten it down. So maybe this will help somebody if it works. Okay tighten then it says to hit that a mallet. Let me grab a mallet. Okay I've got a mallet here that says to hit it. See the whole thing's turning. So what I think I'm going to have to do is I've got me a real thin wrench here. I think we need to hold that right. Now that makes sense. Get it off the edge of the table. It doesn't seem like anything's happening. I'm sure how this is going to come out. Let's go ahead and start taking these screws out. I'll just go ahead and speed you up because I know this is pretty boring here. It's a Torx. They're Torx screws. Let me get a Torx bit and we'll use the impact driver on it. Okay we have them all out. This one right here is a little smaller than the other ones. So I still may have to I'm sure this has to come off somehow. I don't know if it pops off. I do know it's had to be a part before. Okay so that'll work. This has had to been a part before. Like I said this is backwards. If we switch these real stiff wires and that doesn't look like it's going to work if we switch them. So how it'll make sense why that would be backwards like that. Let me check this. Let me do my homework on this. See what the hell is going on. Okay guys what I've done is switch these wires around the purple and the brown. So let's um let's put this on here. Make sure it switches. Got neutral. Yes. Let's find out why this is not going all the way together here. Okay it's together. Let's put a battery in it. Now this thing here I'll just put this on here. So you can see here we're pointing that way. This should be turning clockwise. Okay now let's flip the switch to reverse. See the arrow to bring something out. It should back it out. Screws back in. They're all the same size. It looks like except for that one little one that we took out of there. So we're going to start with this. I'll speed it up for you again. I wanted to make note on this particular one. Let me see if I can get a better looking one for you. See it will take a Torex bit. You can use a straight standard size screwdriver on that. Okay now up here was this one. One of these I couldn't yeah this one my Torex wouldn't go down in so I just used the uh used the standard screwdriver part. So let's get this together. Now let's tighten this back up. I forgot to mention while I had it apart I used some of this and that switch because I don't know. Like I said it would just every once in a while just stop working and you had to like you'd flip that back and forth and then do it again it would work. So okay that's backwards. Now let's put it on forward. See the arrow. Now it should be turning clockwise and it is accomplished something today. So we've accomplished something today. The bench there. What I'm going to do is get a light like I have above the other workbench which I do not turn on. I have turned on that's supposed to start uh like that light right there. So I did put a bench up there but I want to get one of these lights it's a four footer and I want to mount it right under this bench here right along through here. So there you go. So guys if you have to change a chuck in your drill um I still gotta put this back in in the chuck so that'll be sitting right there I will not forget it. So if you have changed the the chuck in your in your DeWalt drill that's how you do it. So awesome job. At least we got that straightened out so now I've got two backups like I said you saw this one still works if I would need it for something so cool and we have one of our own we got a cheap one with several batteries I've got a light blinking. So all right guys and we also have an electric one so I got plenty of drills. All right guys thanks for watching appreciate it Shea Bear the myth man legend I'm gone for now bye bye guys and take care