 And a big one this time. What's up people? Manor here coming to you with a video. This time we're gonna be unboxing, reviewing a very nicely built, well-made and aesthetically pleasing item that can also save your electric bill. That item being a LED semi-flush light. The lifespan of this light is more than 50,000 hours and these are the product specification and it is completely dimmable. So if you're planning to replace a light fixture, look no further. Check this one out. Let's open it up right out the back. It has the instruction manual. It has the hardware information and please whenever you're working with power, double-check the power source. Make sure the light is off before proceeding with any disassembly removal and if you're not comfortable with doing it yourself, contact your electrician. Hire someone to do it and follow the instruction manual. This is all that is included and again the number one thing. To avoid risk of electric shock, make sure to turn off the main power. Just not the power switch, the main power. Everything is very nicely packaged and it already has the wire, the white, the black and the grounding wire already on it and if you're wondering where is the included hardware, well have no fear. Just open, lefty-loosey and it has the hardware right there. Please note this is plastic. The reason why it is plastic, it's semi-gloss so it looks like it's proper glass. So this is definitely a nice thing to keep in mind that way the entire fixture is not too heavy. Mix for a lighter assembly. Just lift up the box which has all the essential hardware. Just open it up. It has a top plate. Dry location only, this is not meant for outside use so please take note of that. The wiring nut and the mounting bracket, the extending arm, it is very well made. Take the zip tie out and remove the foam thing to reveal the LEDs. These are the LEDs that are there. As no wiring is necessary to be done in this I'm going to just take the hardware out of the cover and replace the cover back on and very simply line it up so this recession goes in here and just plug it in. Take the wires and feed it through the middle. There is a small hole and these holes are going to connect right into the bracket right here. Very easy operation. Just get a screwdriver and unscrew the three screws and keep in mind these screws are really tiny so be very careful not to lose them. Look at the screws out. While holding the wire push this down, align the holes and don't over tighten it. You don't want to strip the screw and the final one. If you don't have a power screwdriver you can always use a hand screw. Now just following the direction get a plier and unmount or unscrew the top nut. It doesn't take too much pressure. Feed the pipe through this and it has a nice little lip on the side so it actually sits right on top of it. Now feed the wires through this middle hole. Now take the washer feed the washer through this and now feed the screw through it and tighten it up. Now what we need to do is we need to get to the mounting location and mount this bracket and the bracket needs to go this way. So the concave side up goes through. All right really quick the old hardware has been removed. The new hardware is going to get mounted right here. This is how this thing is going to get mounted. Again the hump side up this side down and do not remove these screws. They are the one that are going to be holding in the light in place. So to mount this I'll put this in there and then put the screws through and they have provided all the hardware fortunately. All right the wires have been stripped. They are ready and I have grounded the wire also. Now all we need to do is match the wires white to white copper to copper or ground to ground. The last one that is left the black one is going to get connected to the black one. And just like that it's done. The light fixture does look really nice and I certainly plan to use it. I'm going to turn it on to see how it looks. Now I've turned the main power circuit on. Time for us to test to see if it worked. And voila it worked. It looks absolutely stunning. It actually does give the room a nice soft warm feel and it looks really elegant. The material is metal. It is really really nice. I do plan to use it and I will definitely take advantage of the LED technology and save the money. As always thank you so much for watching and I will see you guys in the next video. Later people. Bye!