Loading...

Video Wall integration using AV over IP and AV Control (Atlona InfoComm 2018)

1,722 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Jun 6, 2018

Atlona's Seth Powell demonstrates video wall featuring OmniStream and Velocity gateway at InfoComm 2018.

https://atlona.com/video-walls/


Follow Atlona on Twitter!
https://twitter.com/Atlona

---
Video walls have been among the most expensive and complex types of AV systems to design and integrate. But with OmniStream AV over IP and Velocity AV system control, you can now easily and cost-effectively build and configure video wall systems without the complicated wiring, complex programming, and other challenges of the past.
--


Transcription for Video:
Hello, my name is Seth Powell senior Application Engineer for Atlona Technologies I'm standing here at the OmniStream video wall booth And I'm just gonna kind of take you through really quickly what we're showing off today So over here on my right-hand side is going to be a three by three video wall comprised of nine Dell computer monitors mostly so that we can just show that you can literally take any type of monitor and Build a really nice video wall out of it on my left hand side here is going to be an e low touch panel That's being run by a little computer that we have and in the booth here And we're running on this computer. It's a browser and we are in our Atlona Velocity gateway currently This is the same Atlona gateway configuration that you're probably know and are used to if you'd like to see more about our Velocity of stuff. Please stop by the Velocity area over inside of our booth. But what I'm going to do is I'm gonna scroll down here and I'm gonna go right into this Velocity video wall configuration Inside of this configuration if I tap this Display button it goes ahead and opens up my display configuration screen and I can auto arrange these displays in a 2x2 array a three by three array, etc. etc. However, I want to lay these things out. Once I've got these laid out, of course I can also go in and edit my bezel compensation on every single one of these as well This is all built right into our software. So it's very super easy and simple for any anybody to go in and setup Once that's completed I go into my live mode here effectively that allows me to toggle between presets and different sources as you can see right now I've got one source scaled to all nine displays if I want to I can scroll down to another preset that we have here and I can select that and that gives me a little bit of a more kind of a funky setting here where we have this bottom right quadrant as a two by two video all and then various sources scattered throughout the rest of the of the space here I can also go into my live mode that we've set up as another preset and within this live mode I can literally Out to add a source which brings that source into this Top-left display here and then I can drag this over and you can see as I drop that It just drops it right onto that top-left quadrant Then I can move this thing around wherever I want to move it to or I can drag it right in the middle there to scale it to all nine displays and Then boom I have a three by three video wall right there If you'd like to know more about this, please visit our website atlona.com/velocity Also check out atlona.com/omnistream Thank you very much

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...