Making Electron Trees with a Linear Accelerator





Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Mar 9, 2008

This Tree Party video was taken in Roseburg, Oregon back in 1996, courtesy of Mr Don Russel, Medical Physicist Extraordinair, who graciously allowed me to temporarily turn his Varian Medical Linear Accelerator from a cancer therapy life saving device into a Lichtenburg making device. Many thanks to Don and also his lovely wife who provided food for us nut cases who are trying profusely to electrocute ourselves. One of the Physicists recieves a "SHOCKING" surprize when discharging this particular block of plastic.

Also, many thanks to the late Russel and Sigurd Varian for inventing these incredible machines, wich have cured millions of cases of cancer, and has relieved the suffering of millions of people since thier introduction in the early sixties.

This video is of a bunch of crazy nuts making Electron Trees with a 6 Mega Volt Sub Atomic Electron Beam, from a Linear Accelerator. The plastic is irradiated with a 6 Million Volt Beam of pure electrons. I'm guessing approximately 3 to 4 Million Rads/Reontoens are delivered to the plastic in just 5 short seconds. Certainly enough radiation to kill a person ON THE SPOT if it was delivered to the whole body. We have to temporarily leave between exposures to operate the controls on the outside of this thick concrete bunker.

At this energy level the electrons are stopped just short of center. Appx 2 cm into the plastic. The piece is then flipped over and radiated again. These electrons also stop just short of center. This is done simply to get a wider tree as observed from the side.

The plastic will later be polished on the sides so the tree will be visible from the sides.

After being radiated, the Plastic Piece is charged up to an EXTREMELY high negative potential, as it then has excess electrons.

The plastic is then discharged to mother earth using a technique approved by UNDERTAKER laboratories.

The resulting discharge leaves what appears to be a lightening bolt frozen in plastic. As the electrons rush out of the plastic, they fracture the plastic leaving a "Frozen Lightening Bolt" in thier place. It's scientific name is a 3Dimensional Lichtenburg Figure. If you put a light under it, it really lites up the "tree", and they are simply beautiful. I have made Squares, Globes, Cylinders, all kinds of shapes.

For more information you can visit Bert Hickmans Web Site at:

sid mouser


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...