• trip to wyre forest - Duration: 2 minutes, 42 seconds.

    • 8 years ago
    The dog needed a walkies and a poo.
    So with the dog farting and stinking up the place in the boot, I had to get to the forest fast.
  • Mini engine 1275 fitting pistons - Duration: 7 minutes, 10 seconds.

    • 8 years ago
    Here's my MG Metro engine from my Mini. After getting the block prepared, bored to 1293cc and fitting the crank, this video shows me fitting the pistons with con rods.
    They're Hepolite pistons and...
  • MG Metro engine rebuild for Classic Mini - Duration: 4 minutes, 31 seconds.

    • 8 years ago
    Here's the next stage of rebuild for one of my Mini engines.
    The block was sent to Rob Walker engineering (Nice chap) He acid dipped it, replaced the damaged cam bearings, bored it to 1293cc, ski...
  • Jaguar C-X75 cluster display - Duration: 2 minutes, 4 seconds.

    • 9 years ago
    This is an animation I did for the cluster display on the Jaguar concept car 2010
    I put the animation in a photo taken by Evo magazine as a bit of fun.
    The overall theme of the gauges are inspire...
  • Changing a rear brake adjuster for the Austin Mini - Duration: 2 minutes, 30 seconds.

    • 9 years ago
    After getting a rear brake adjuster stuck solid where I had to remove the whole radius arm and use a blowtorch to break the rust I had a run of titanium rear brake adjusters manufactured.
  • how to test the Suzuki RGV250SP (VJ23) CDI.mp4 - Duration: 3 minutes.

    • 9 years ago
    Hopefully this video will help fellow VJ23 owners out there.
    Many years ago I drove my bike a lot in the rain and water got into the connector for the oil solenoids causing it to blow a fuse and...
  • How to fit a clevis pin.wmv - Duration: 96 seconds.

    • 9 years ago
    I'm using titanium clevis pins, stainless washer and stainless split pin that I sell on Titan Classics web shop. They should last forever.
    A quite basic demo really, but a lot of people seem terr...
  • How to remove an engine stud - Duration: 105 seconds.

    • 9 years ago
    If you don't have a stud extractor this is the easy way to remove an engine stud and refit a new one.

    If you're into Classic Mini check out the titan classics website for longer lasting, corrosi...
  • Speeded up rebuild of MG Metro engine Mini 1275cc - Duration: 5 minutes, 14 seconds.

    • 9 years ago
    This is my MG Metro engine from my Mini. After a head gasket fail and leaving in the garage over the winter for water to get in the engine it was time for an engine rebuild.

    The engine had do...
to add this to Watch Later

Add to

Loading playlists...