• Replicant and SHR running on GTA04 - Duration: 4:22.

    • 9 months ago
    Replicant 4.2.2 (FLOSS Android distribution) and SHR-core running smoothly on early (800 MHz) GTA04A4 board.

    Both images are experimental ones (stable releases are for the weak!), and on Replicant...
  • Pyra Development: First Preview of a 3D Printed Case - Duration: 6:35.

    • 10 months ago
    A first preview of the Pyra case design, far from being finished.
    It's main use will be to test that all huge components like antennas, Ports and the CPU PCB will fit.
  • Neo900 PCB work in progress - Duration: 1:19.

    • 1 year ago
    This video shows a 3D rendering of the PCB design we are currently working on. It already has the (almost) right contour, and if you know where to look you can identify the camera module, push butt...
  • The On/Off key is connected and we plan to add a "status" input GPIO as well. We need that for proper power management anyways. So that the CPU (kernel/user space) can detect if the modem isn't turning off and always knows if the modem is powered or not. Adding a MOSFET to VCC may degrade the performance. We need as low mOhms as possible to the battery.

    Neo900 new motherboard concept (GTA04b7) - Duration: 3:08.

    • 1 year ago
    Neo900 - how to squeeze a GTA04 motherboard (1GHz DM3730 OMAP3 CPU + 3G) into an existing N900 case. This video illustrates the idea that the www.neo900.org project wants to come to real life.
  • Copyright infringement...

  • Delete this video since it is a copyright infringement!

  • OV9655 camera on GTA04 finally working! - Duration: 0:44.

    • 1 year ago
    Finally, here is the Linux 3.7 driver for the OV9655 connected to a DM3730 (OMAP3) working.
    The sequence shows camera startup (green/black and AGC) pointing to a lamp on the ceiling of the lab, the...
  • PVR/SGX driver on GTA04 with Linux 3.7 kernel - Duration: 0:22.

    • 2 years ago
    This short video shows the sgx_clipblit_test and the sgx_render_flip_test
  • World of OpenPhoenux @ FOSDEM 2013 - Duration: 6:52.

    • 2 years ago
    Impressions from running an OpenPhoenux stand at FOSDEM 2013 in Brussels, Belgium. Shows how the spirit of the community is, how we arrived, built up the stand and had many fruitful discussions wit...
  • Letux 7004 Prototype - Duration: 3:34.

    • 2 years ago
    The prototype of a free and open software friendly 7 inch tablet based on the GTA04 motherboard.
  • GTA04 Keyboard Prototype - Duration: 1:25.

    • 2 years ago
    This video shows a concept and keyboard prototype for the OpenPhoenux GTA04 that is to be installed as a replacement battery cover. The case is to be developed and since the plan is to do it by 3D ...
  • GTA04 Keyboard Comparison - Duration: 1:56.

    • 2 years ago
    This video shows a comparison of some older and newer keyboard designs for handheld devices (mostly PDAs): e.g. Sharp Zaurus, Zipit, Nokia N880. And it shows a new keyboard prototype for the OpenPh...
  • OpenPhoenux: experiments towards a new Independent Mobile Handheld - Duration: 9:50.

    • 2 years ago
    OpenPhoenux is the Independent Mobile Handheld and a successor of the OpenMoko GTA02. This video shows experiments how to take a 3D printed case, a GTA04 motherboard and run and operate the QtMoko ...
  • GTA04-Tester - Duration: 3:30.

    • 3 years ago
    This video shows the first 3 fresh GTA04A3 boards and how they are tested.

    The test equipment consists of some old MacMini (PowerPC based)
    with USB cable, a SD card with the hardware-validation Li...
  • Boot Speed Comparison - Duration: 2:17.

    • 3 years ago
    This video shows a comparison of a Openmoko GTA02 (with OM2009.05), a GTA04 board with Debian Squeeze/LXDE and a iPhone 3G.
    For fairness, the GTA02 is started first from the boot menu, because the ...
  • Production of the FRNBv3 - Duration: 9:25.

    • 3 years ago
    We were allowed to take a view over the shoulders of the workers at our contract manufacturer who is doing the SMD production of the Freerunner Navigation Board and the GTA04. The video shows most ...
  • GTA04A2 boots Linux - Duration: 5:29.

    • 3 years ago
    This movie shows the GTA04A2 engineering board how it is installed in the case, how battery is inserted and finally in a complete sequence how it boots through U-Boot to the Kernel, to show a conso...
  • GTA04 - Duration: 3:07.

    • 4 years ago
    this video shows the first GTA04A2 sample board to boot into U-Boot while being powered by an external supply. After booting, commands are shown that make the LEDs blink, switch on the LCD module a...
  • Openmoko Panda Hybrid booting - Duration: 0:28.

    • 4 years ago
    Experimental GTA04 booting and

    1. initializing LCD module
    2. then showing constant background color (yellow)
    3. and switching to a Splash screen image.
    4. Finally blinking the LEDs in the AUX and ...
  • TangoGPS on the Openmoko Beagle Hybrid - Duration: 0:08.

    • 4 years ago
    TangoGPS on the Openmoko Beagle Hybrid
  • Openmoko Beagle Hybrid in operation - Duration: 1:30.

    • 4 years ago
    Openmoko Beagle Hybrid in operation
to add this to Watch Later

Add to