• Virtual Bloodstain Pattern Analysis

    4,776 views 4 years ago
    Here is a short video clip showing what a virtual reality crime scene might look like after a bloodstain pattern analysis has been performed with a laser scan of the scene.

    The video shows Uwe Woessner from the University of Stuttgart manipulating a laser scan around him and with my bloodstain pattern analysis all in 3D. You can find information about his setup by looking for "The Cave" + University of Stuttgart in Google.

    Special thanks to the Ontario Police College for inviting me to participate and to the Advanced Bloodstain Pattern Analysis Class of 2014! Show less
    Read more
  • Uploads Play all

    • Intel D415 with Dot3D Software - Duration: 3 minutes, 8 seconds.

      • 2 months ago
      This video gives an early look at how the D415 works with DotProduct's Dot3D software. The advantage of the D415 is that it has some outdoor scanning capability.
    • A look at FARO's High Detail Scanning Feature - Duration: 8 minutes, 10 seconds.

      • 2 months ago
      This video gives a very simple look at the new High Detail scanning feature that became available with the latest firmware update from FARO on their S series scanners.
    • FARO S Series Firmware Update - Duration: 4 minutes, 25 seconds.

      • 4 months ago
      This is a brief tutorial on how you can automatically update your scanner's firmware on the new S series scanners. Very simple and automated...I like that!
    • Multi Trajectory Tool for Bullet Trajectory App in Scene 7 - Duration: 112 seconds.

      • 6 months ago
      We've added a new multi-trajectory tool and have done some bug fixes with the latest release of the Bullet App for FARO Scene.

      This video gives a very short demonstration on how to use the tool.
    • Remote LED Lights for FARO S350 - Duration: 15 seconds.

      • 9 months ago
      I created this small bracket and stuck some remote LED lights on to create a small lighting system for the FARO S350 scanner. It was cheap and it works!
    • Lafleche Cave Scanning - Duration: 61 seconds.

      • 1 year ago
      This was a scan of a cave in Lafleche, Quebec. Artificial light was used to help illuminate the cave as it was completely dark.
    • South Mountain Petroglyphs - Duration: 111 seconds.

      • 1 year ago
      A little bit of climbing to scan a fewinteresting Petroglyphs in South Mountain, AZ
    • Bullet Trajectory App, V1.3, Updated Video Tutorial for Scene 6 - Duration: 11 minutes.

      • 2 years ago
      This is an updated video tutorial showing a few new features in our Bullet Trajectory App for Scene 6. Overall, it's the same tool with a couple of new small enhancements.
    • Oculus Rift Integration Into Arena 4D Data Studio - Duration: 5 minutes, 10 seconds.

      • 2 years ago
      A quick look at integrating the Oculus Rift headset into Arena 4D Data Studio
    • Wireless Keyboard and Mouse with the FARO X330 - Duration: 3 minutes, 7 seconds.

      • 2 years ago
      If the wireless control on the X330 is a little difficult, it's possible to hook up a wireless mouse or keyboard in the micro USB port of the scanner to hit the Start button.
    • Review and Demo of DotProduct Scanner - Duration: 7 minutes, 2 seconds.

      • 2 years ago
      This video gives you a brief introduction to the DotProduct scanner. It's really quite a lot of fun to scan with and they have done a great job of making a small, easy to use system.
    • IAFSM Blast Workshop, November 12, 2015 - San Diego - Duration: 2 minutes, 40 seconds.

      • 3 years ago
      This is a video of the Blast Workshop held at the IAFSM 2nd International Educational Workshop in San Diego on November 12th, 2015.

      The vehicles were documented with 3D laser scanners both before ...
    This item has been hidden
  • Popular uploads Play all

    • Introductory Video on CloudCompare - Duration: 11 minutes.

      • 6 years ago
      This video shows the basics of how to get started with Cloudcompare. If you haven't heard of CloudCompare it's an open source application created by Daniel Giradeau-Montaut and is an excellent too...
    • FARO Freestyle Intro Video - Duration: 7 minutes, 43 seconds.

      • 4 years ago
      This is an early look into the FARO Freestyle hand scanner that was just released yesterday. I was fortunate to have been chosen as a beta tester and wanted to give some people a bit more backgrou...
    • Crime Scene Recreation with Photogrammetry - Duration: 2 minutes, 50 seconds.

      • 10 years ago
      Here is a simple example of how you can go from photos to 3D measurements with the use of photogrammetry software. Check out www.ai2-3d.com
    • iPhone Video to Point Cloud with Visual SFM - Duration: 7 minutes, 33 seconds.

      • 6 years ago
      This video gives a quick look at using your iPhone video to create a dense point cloud with Visual SFM
    • Photofly 2- Yamaha Blaster Test - Duration: 27 seconds.

      • 7 years ago
      Once again, I am impressed with the simplicity of Autodesk's Photofly 2. I used an old set of photos that I had and I think the results could be used as a reference for modeling.
    • Visual SFM - Introductory Video - Duration: 6 minutes, 21 seconds.

      • 7 years ago
      Here is an introductory video to VisualSFM. This is a great application to create dense point cloud reconstructions from a set of photographs.

      This open source tool was developed by Changchang ...
    • Skeletal Fracture of Foot Bones - Duration: 102 seconds.

      • 8 years ago
      This was an animation created to show the extend of damage of an individual's vehicle accident.
    • Photofly 2 - Documenting Footprints in Snow - Duration: 17 seconds.

      • 7 years ago
      Autodesk recently updated their beta of Photofly and I used some old photos that I processed in order to obtain a 3D model of a footprint in snow. Not sure that it can be used for forensic purpose...
    • CloudCompare 3 Point Picking Alignment - Duration: 7 minutes, 3 seconds.

      • 6 years ago
      This video explains the new 3 point picking feature for aligning scans in CloudCompare v2.4
    • Studio Clouds for 3DS Max Plugin - Duration: 4 minutes, 15 seconds.

      • 9 years ago
      Here is a brief look at how the Studio Clouds plugin for 3DS Max looks like. Keep in mind this program is changing rapidly and it just might be that the next time you try it, there will be many ad...
    • Getting Started with CMPMVS - Duration: 9 minutes, 19 seconds.

      • 6 years ago
      This video gives a very brief overview of how to setup and get dense reconstructions with CMPMVS
    • CloudCompare - Subsampling - Duration: 7 minutes, 14 seconds.

      • 5 years ago
      This video tutorial shows you how to use some of the subsampling features in CloudCompare. This is really useful for creating evenly spaced point clouds.
    This item has been hidden
to add this to Watch Later

Add to

Loading playlists...