Watch Queue
Queue
Watch QueueQueue
The next video is starting
Loading...
-
-
-
-
Sign in to like videos, comment, and subscribe.
Watch Queue
Queue
__count__/__total__
-
-
QForm
QForm is intended for simulation and optimization of cold, warm and hot die forging, open die forging, rolling, profile extrusion and other metal forming processes http://qform3d.com/products/qform-
Optimization through simulation during the design phase of the D Ring product produced by DMM - Duration: 93 seconds.
-
QForm VX 8.2 new version features and possibilities - Duration: 4 minutes, 53 seconds.
-
Optimization of forging technology at DMM International - Duration: 100 seconds.
-
Open die forging of a rotor simulation in QForm - Duration: 2 minutes, 26 seconds.
-
Open die forging of a ring simulation in QForm - Duration: 75 seconds.
-
Cold forming simulation in QForm - Duration: 68 seconds.
-
Hammer forging simulation in QForm - Duration: 109 seconds.
-
Radial forging and Rotary swaging simulation in QForm - Duration: 78 seconds.
-
Optimization of stub axle forging using QForm - Duration: 90 seconds.
-
Hammer forging simulation in QForm - Duration: 96 seconds.
-
Hydroforming simulation in QForm - Duration: 74 seconds.
-
Helical rolling and cross-roll piercing simulations in QForm - Duration: 2 minutes, 24 seconds.
This item has been hidden -
-
QForm Extrusion
QForm Extrusion is the only program in the market that can perform simulations of material flow that are thermally and mechanically coupled to the die deformation http://qform3d.com/products/qfextrusion-
Aluminium profile extrusion simulation in QForm - Duration: 81 seconds.
-
QForm Extrusion Software - Duration: 2 minutes, 3 seconds.
-
Metal flow simulation in QForm Extrusion program - Duration: 9 seconds.
-
Metal flow simulation in QForm Extrusion program - Duration: 37 seconds.
-
Metal flow simulation in QForm Extrusion program - Duration: 40 seconds.
-
Metal flow simulation in QForm Extrusion program - Duration: 39 seconds.
-
QForm Extrusion simulation - Duration: 27 seconds.
-
Profile flow simulation - Duration: 41 seconds.
-
QForm Extrusion Die Designer (QExDD) - Duration: 8 minutes, 12 seconds.
- CC
-
QForm Extrusion detailed tutorial - Duration: 17 minutes.
-
Example of profile extrusion simulation in QForm Extrusion - Duration: 17 minutes.
-
Presentation about QForm Extrusion program of N.Biba at ALUMINIUM2000 MILAN, 14 May 2013 - Duration: 21 minutes.
This item has been hidden -
-
QForm Extrusion Die Designer
QExDD is an automated system for 3D design of dies, mandrels and other parts of the tooling set for extrusion of aluminum hollow and solid profiles http://qform3d.com/products/qexdd-
QForm Extrusion Die Designer (QExDD) - Duration: 8 minutes, 12 seconds.
- CC
-
QForm Extrusion Die Designer (QExDD) - Duration: 11 minutes.
This item has been hidden -
-
Trainings
-
Tutorial: profile extrusion simulation in QForm VX - Duration: 9 minutes, 2 seconds.
-
Example of ring rolling simulation in QForm RingRolling - Duration: 11 minutes.
-
QForm Extrusion detailed tutorial - Duration: 17 minutes.
-
Example of profile extrusion simulation in QForm Extrusion - Duration: 17 minutes.
-
Basic example of 3D geometry preparation in QShape - Duration: 14 minutes.
-
Basic example of forging simulation in QForm (2D+3D) - Duration: 21 minutes.
-
QForm Extrusion Die Designer (QExDD) - Duration: 8 minutes, 12 seconds.
- CC
-
QForm Extrusion Die Designer (QExDD) - Duration: 11 minutes.
-
Import and geometry preparation in QForm geometry editor QShape - Duration: 8 minutes, 7 seconds.
-
Example of 3D modeling of a close die forging of drive shaft fork in QForm - Duration: 11 minutes.
-
Fork simulation. Штамповка Вилки Карданного Вала - Duration: 10 minutes.
-
QShape - 3D geometry editor. Модуль подготовки 3D геометрии - Duration: 7 minutes, 46 seconds.
This item has been hidden -
-
Presentations
-
New possibilities and features of QForm VX - Duration: 7 minutes, 12 seconds.
-
ICEB 2015: Presentation of benchmark results obtained by QForm Extrusion - Duration: 18 minutes.
-
Leonardo da Vinci Machine in QForm. Thank you Leonardo! - Duration: 57 seconds.
-
Presentation about QForm Extrusion program of N.Biba at ALUMINIUM2000 MILAN, 14 May 2013 - Duration: 21 minutes.
-
Обзорная презентация по программе QForm 7 - Duration: 20 minutes.
-
QForm 7 Newsletter #1 - Duration: 5 minutes, 37 seconds.
-
Mechanicaly Coupled Extrusion Simulation with QForm Extrusion Program - Duration: 4 minutes, 38 seconds.
This item has been hidden -
-
Metal forming simulation in QForm. Theoretical course (in Russian)
-
Теоретические основы моделирования процессов ОМД в программе QForm V8. Часть 1 - Duration: 43 minutes.
-
Теоретические основы моделирования процессов ОМД в программе QForm V8. Часть 2 - Duration: 46 minutes.
-
Теоретические основы моделирования процессов ОМД в программе QForm V8. Часть 3 - Duration: 43 minutes.
-
Теоретические основы моделирования процессов ОМД в программе QForm V8. Часть 4 - Duration: 54 minutes.
-
Теоретические основы моделирования процессов ОМД в программе QForm V8. Часть 5 - Duration: 36 minutes.
-
Теоретические основы моделирования процессов ОМД в программе QForm V8. Часть 6 - Duration: 1 hour, 4 minutes.
-
Теоретические основы моделирования процессов ОМД в программе QForm V8. Часть 7 - Duration: 36 minutes.
-
Теоретические основы моделирования процессов ОМД в программе QForm V8. Часть 8 - Duration: 56 minutes.
-
Теоретические основы моделирования процессов ОМД в программе QForm V8. Часть 9 - Duration: 59 minutes.
-
Теоретические основы моделирования процессов ОМД в программе QForm V8. Часть 10 - Duration: 46 minutes.
This item has been hidden -