James Lerch

  • Another day at the field, Good times

    946 views 5 years ago
    Helis, Good times, Bad Times, yup that's about right. Show less
    Read more
  • Uploads Play all

    This item has been hidden
  • Popular uploads Play all

    • Powder Coating Robot Parts at home - Duration: 5 minutes, 13 seconds.

      • 6 years ago
      Powder coated these for a friend's son's robotic competition entry. I'm using powder from Columbia Coating, the gun is from Harbor Freight. The oven is a home brewed afair built from galvanized r...
    • The Machariel should die! - Duration: 28 minutes.

      • 4 years ago
      Machariel in a mission shoots a Ninja. Ninja gets in a Cynabal and neither ship can kill the other and the Machariel keeps burning .

      Engage the Suddenly Ninja intoxicated rapid response syste...
    • Home Built Soda Fountain - Duration: 106 seconds.

      • 8 years ago
      Internet + Ebay + Money + Time = Soda Fountain dispensing Mt. Dew and Orange Soda :)
    • Jar Jet with chemical colorant - Duration: 2 minutes.

      • 8 years ago
      Jar Jet with copper chloride for green flame, and another with sodium chloride for yellow flame
    • Vacuum chamber for aluminizing optical surfaces - Duration: 9 minutes, 1 second.

      • 5 years ago
      This was the culmination of my Amateur Telescope Making obsession :-) Back in 2002 I built this vacuum chamber to coat my home made telescope mirrors with a thin optical layer of evaporated alumin...
    • Motor Swap, OS-91-HZ for a Novarossi 91HR-3D-3N at OHB 2009 - Duration: 46 seconds.

      • 5 years ago
      Luka let Rich and I play with his companie's new 91 HR-3D-3N motor! The swap involved only replacing the motor, keeping EVERYTHING else the same (fuel, glow plug, muffler, etc)

      Fuel = Rotor Rage ...
    • Do it yourself sewer connections :-) - Duration: 39 seconds.

      • 6 years ago
      Our neghborhood recently had city sewer made available. Its up to the home owners to connect to the newely installed sewer main.

      Everyone on the block except me and this guy decided to hire som...
    • DX6i + Futaba 401 Gyro + Raptor 60 setup - Duration: 93 seconds.

      • 7 years ago
      Just trying to help a fellow heli freak
    • Vaulted Ceiling Crown molding job - Duration: 74 seconds.

      • 3 years ago
      Helping out the family business by being the "cut" man running the miter box cutting the silly expensive crown molding.

      Fair bit of math involved, all molding cut on the 'flat' on the saw, so ha...
    • 1st "Auto Rotation" or another almost crash - Duration: 2 minutes, 8 seconds.

      • 7 years ago
      That is if you call falling out of the sky, skidding across and/or bouncing off the grass, then climbing out in a mild panic, followed by manic laughter an "Auto"
    • Hitec HS65-HB 360 degree servo mod - Duration: 4 minutes, 36 seconds.

      • 6 years ago
      Modifying the HS65 servo for infinite rotation. It won't work like a normal servo, but it will make a great pan servo for FPV flying. Just have to be careful not to wind the cables up by accident.
    • Vacuum Bagging with Glad Press and seal - Duration: 43 seconds.

      • 8 years ago
      Never thought this would work..
    This item has been hidden
to add this to Watch Later

Add to

Loading playlists...