152
  • Greenteeth®: made for Stump Grinders….. and robots? - Duration: 66 seconds.

    • 2 years ago
    • 645 views
    We knew our teeth destroy stumps, but we never thought to use them to destroy robots! When the Robotics Club at Prospect High School began designing their robot for an upcoming Robot Rumble competi...
  • Vermeer 30TX Greenteeth® Replacement Wheel - Duration: 3 minutes, 59 seconds.

    • 2 years ago
    • 3,116 views
    Through extensive testing, Green Manufacturing designed a wheel specifically for the Vermeer 30TX. The new wheel utilizes the same technology and features that we incorporated into our performance ...
  • Bluebird Upgrade Kit - Duration: 4 minutes, 18 seconds.

    • 3 years ago
    • 2,821 views
    We're excited to show off the Performance Upgrade Kit now available for the Bluebird SG1314A. In this video, this small handlebar machine with a 13hp Honda engine takes care of this 16" Pine stump ...
  • LoPro™ Pocket Production - Duration: 3 minutes, 26 seconds.

    • 3 years ago
    • 855 views
    Check out this video of our newest machine, the Fanuc Robodrill, machining a LoPro™ pocket here at our manufacturing facility. This new machine will double our manufacturing output of pockets with ...
  • Vermeer 852 Highlight - Duration: 4 minutes.

    • 4 years ago
    • 2,110 views
    The Reverse-S™ Cutting System is now available for the Vermeer 852! Pre-order yours today!

    What sets the Reverse-S™ Cutting System apart from other wheels is the unique placement of the pockets in...
  • Vermeer 252 Upgrade - Duration: 3 minutes, 36 seconds.

    • 4 years ago
    • 13,012 views
    Our performance upgrade kit for the Vermeer 252 includes a new wheel pattern that uses only 6 teeth, verses 16 for a standard setup. Fewer teeth mean less drag! Also, the separation of the teeth al...
  • Reverse-S™ Cutting System - Carlton 4400 - Duration: 8 minutes, 59 seconds.

    • 4 years ago
    • 3,052 views
    Check out this video of a Carlton 4400 equipped with the Reverse-S™ Cutting System cut through a 78" white oak stump!This machine destroyed this stump in just 23 minutes!

    What sets the Reverse-S™...
  • Greenteeth® Rayco Upgrade Kit On A Pine Stump - Duration: 7 minutes, 45 seconds.

    • 4 years ago
    • 2,015 views
    For those customers that are looking for a boost in performance without investing in a new wheel, Green Manufacturing, Inc. now have performance upgrade kits that are designed to help you achieve o...
  • Greenteeth® Rayco Upgrade Kit On Pine Stumps - Duration: 4 minutes, 45 seconds.

    • 4 years ago
    • 2,847 views
    For those customers that are looking for a boost in performance without investing in a new wheel, Green Manufacturing, Inc. now have performance upgrade kits that are designed to help you achieve o...
  • Greenteeth® Rayco Upgrade Kit On A Boxelder Stump - Duration: 5 minutes, 57 seconds.

    • 4 years ago
    • 2,748 views
    For those customers that are looking for a boost in performance without investing in a new wheel, Green Manufacturing, Inc. now have performance upgrade kits that are designed to help you achieve o...
  • Vermeer 60TX Reverse-S Cutting System - Duration: 2 minutes, 2 seconds.

    • 4 years ago
    • 2,367 views
    Introducing the new Reverse-S Cutting System™ by Green Manufacturing, Inc. The unique placement of the pockets in a reverse spiral, Step-Out™ design creates a large cutting radius allowing you to t...
  • Quadwheel™ on a Morbark G42 Large Stump Highlight - Duration: 12 minutes.

    • 4 years ago
    • 2,449 views
    Introducing the new Quadwheel™ by Green Manufacturing, Inc. The 100% CNC machined Quadwheel™ will give you a remarkably smooth, consistent cut. There is virtually no hopping of your machine or bolt...
  • Quadwheel™ on a Morbark G42 - Duration: 11 minutes.

    • 4 years ago
    • 502 views
    Introducing the new Quadwheel™ by Green Manufacturing, Inc. The 100% CNC machined Quadwheel™ will give you a remarkably smooth, consistent cut. There is virtually no hopping of your machine or bolt...
  • Greenwheel™ on a Vermeer 630B - Duration: 8 minutes, 15 seconds.

    • 5 years ago
    • 6,016 views
    The 100% CNC machined Greenwheel™ will give you a remarkably smooth, consistent cut. There is virtually no hopping of your machine or bolt breakage. This video demonstrates the Greenwheel™ running ...
  • Quadwheel™ on a Rayco 1631 - Duration: 4 minutes, 7 seconds.

    • 5 years ago
    • 2,992 views
    Introducing the new Quadwheel™ by Green Manufacturing, Inc. The 100% CNC machined Quadwheel™ will give you a remarkably smooth, consistent cut. There is virtually no hopping of your machine or bolt...
  • Quadwheel™ on a 27 HP Carlton 4012 - Duration: 5 minutes, 19 seconds.

    • 5 years ago
    • 6,143 views
    Introducing the new Quadwheel™ by Green Manufacturing, Inc. The 100% CNC machined Quadwheel™ will give you a remarkably smooth, consistent cut. There is virtually no hopping of your machine or bolt...
  • Greenwheel™ on a Vermeer 352 - Duration: 8 minutes, 17 seconds.

    • 5 years ago
    • 3,934 views
    The 100% CNC machined Greenwheel™ will give you a remarkably smooth, consistent cut. There is virtually no hopping of your machine or bolt breakage. This video demonstrates the Greenwheel™ running ...
  • Greenwheel™ on a Vermeer SC252 - Duration: 4 minutes, 9 seconds.

    • 6 years ago
    • 4,380 views
    The 100% CNC machined Greenwheel™ will give you a remarkably smooth, consistent cut. There is virtually no hopping of your machine or bolt breakage. This video demonstrates the Greenwheel™ running ...
  • Greenwheel™ on a Carlton SP4012 - Duration: 5 minutes, 2 seconds.

    • 6 years ago
    • 8,373 views
    The 100% CNC machined Greenwheel™ will give you a remarkably smooth, consistent cut. There is virtually no hopping of your machine or bolt breakage. This video demonstrates the Greenwheel™ running ...
  • Greenwheel™ on a Rayco 1631 - Duration: 5 minutes, 19 seconds.

    • 6 years ago
    • 888 views
    The 100% CNC machined Greenwheel™ will give you a remarkably smooth, consistent cut. There is virtually no hopping of your machine or bolt breakage. This video demonstrates the Greenwheel™ running ...
  • 700 Series LoPro™ Pockets - Duration: 5 minutes, 58 seconds.

    • 6 years ago
    • 1,296 views
    Another sneak peek into our production process here at Green Manufacturing, Inc. This is a video showing the machining process that we do for our 700 series LoPro™ pockets. Each 700 series holder i...
  • 700 Series Greenteeth® Shank - Duration: 103 seconds.

    • 6 years ago
    • 2,096 views
    A little sneak peek into our production process here at Green Manufacturing, Inc. This is a video showing the initial process that we do here for our 700 series teeth. Each tooth insert is brought ...
  • Greenwheel™ Testimonial On A Rayco 1631 - Duration: 9 minutes, 19 seconds.

    • 6 years ago
    • 7,756 views
    Here is our latest testimonial from Gerry at Gerry's Tree Service. Gerry just took his Rayco 1631 out on a job after it was fitted with the new Greenwheel™. This is what he had to say.

    As Introduc...
  • Greenwheel™ - Long Smooth Cuts - Duration: 3 minutes, 19 seconds.

    • 6 years ago
    • 7,299 views
    Here are some highlights of the new Greenwheel™. The Greenwheel™ loves cutting down low. You are able to consistently cut 25" x 1" through many different stumps.

    As Introduced at TCIA Baltimore 20...
  • Greenwheel™ Testimonial On A Vermeer SC252 - Duration: 7 minutes, 7 seconds.

    • 6 years ago
    • 17,120 views
    We put a Greenwheel™ on a Vermeer 252 this week for a customer. It's a 1997 Vermeer SC252 with a 20 HP V-Twin. The machine had 2232 hours on it. It was a beautiful January day in Michigan as you ca...
  • Greenwheel™ Plunge - Duration: 2 minutes, 54 seconds.

    • 6 years ago
    • 6,466 views
    As Introduced at TCIA Baltimore 2012. The new Greenwheel™ will be released Spring of 2013. The 100% CNC machined Greenwheel™ will give you a remarkably smooth, consistent cut. There is virtually no...
  • Greenwheel™ Testimonials - Duration: 10 minutes.

    • 7 years ago
    • 4,675 views
    As Introduced at TCIA Baltimore 2012. Here are some testimonials from Professionals who have tested out the Greenwheel™. The new Greenwheel™ will be released Spring of 2013. The 100% CNC machined G...
  • Greenwheel™ - Duration: 6 minutes, 40 seconds.

    • 7 years ago
    • 3,306 views
    As Introduced at TCIA Baltimore 2012. The new Greenwheel™ will be released Spring of 2013. The 100% CNC machined Greenwheel™ will give you a remarkably smooth, consistent cut. There is virtually no...
  • TCIA - Duration: 113 seconds.

    • 7 years ago
    • 704 views
    Green Manufacturing, Inc. will be unveiling some new products at TCIA Baltimore 2012.
    Here is a little sneak peak of one in action. Stay tuned for more information coming soon.
    Or stop by booth #12...
to add this to Watch Later

Add to

Loading playlists...