248
  • 2019 05 28 Where is Elise? - Duration: 92 seconds.

    • 3 weeks ago
    • 52 views
    South East Pylon of Sydney Harbour Bridge has a VIP visitor!
    Filmed with a Nikon P1000 and edited in Corel Video Studio 2019.
  • Raw footage 4k - Duration: 106 seconds.

    • 3 weeks ago
    • 12 views
    Some of this was left on the cutting room floor by Baston and Baston, and none has previously been shown in 4k.
  • Vivid, Sydney Harbour, Saturday Night - Duration: 11 minutes.

    • 3 weeks ago
    • 114 views
    4k from Blues Point, pretty much at sea level. Shot on a Sony A7r3.
    Edited in Corel Video Studio Ultimate 2019
  • Julia - Channel

    • 6 videos
    • CHANNEL
    12
  • DJI Ronin S - Best and Worst of the DJI Ronin-S in Depth - Duration: 8 minutes, 44 seconds.

    • 9 months ago
    • 20,100 views
    Our review of the DJI Ronin S gimbal. The DJI Ronin-S is not cheap but the performance is incredible and the Ronin S setup is very easy like the crane v2! the DJI Ronin S app, time lapse, motion la...
  • Bridge surprise - Duration: 16 seconds.

    • 1 month ago
    • 24 views
    Syndey Harbour Bridge goes for a spin.
    Shot on a Panasonic GH5 with a 20mm lens, mounted on a Ronin-S.
  • To the back door - Duration: 112 seconds.

    • 1 month ago
    • 15 views
    Our block and the route to the back door.
    Shot with a Panasonic GH5 with 20mm lens, mounted on a Ronin-S.
  • Nexus 6P App V1 1 8 Rirmware 1 8 0 70 - Duration: 14 seconds.

    • 1 month ago
    • 17 views
    Showing that the app is unresponsive when Sensor Type, Focal Length, Overrlay and Delay are touched.
  • The Film Poets - Channel

    • 57 videos
    www.thefilmpoets.com
    • CHANNEL
    104,312
  • DJI Ronin-S Review from a Wedding Filmmaker - Duration: 16 minutes.

    • 1 year ago
    • 148,575 views
    A full review using the DJI Ronin-S for weddings.
    Enter the Ronin-S Giveaway ➤ http://bit.ly/RoninSGiveaway
    Buy Ronin-S (BH) ➤ http://bit.ly/Ronin-S-bh
    Subscribe ➤ http://geni.us/SubscribeFP
    Buy R...
  • DJI Ronin S - Not Worth it? - Duration: 17 minutes.

    • 4 months ago
    • 21,903 views
    The Ronin S has been out for a while now, is it actually worth the money? I decided to get and and give it and try it out. Today I’m going to give you my verdict regarding the DJI Ronin S. I think ...
  • 2019 04 25 Anzac Day 4k - Duration: 2 minutes, 16 seconds.

    • 1 month ago
    • 24 views
    A Caribou marked with "45 years of Service" and ? flying around Sydney.
  • Nikon P1000 Gibbous moon 01 from Sydney - Duration: 88 seconds.

    • 2 months ago
    • 97 views
    When fully, or nearly fully, zoomed in the movement of the moon relative to the Earth is very apparent.
    Shot with Nikon P1000 super zoom and processed with Corel Video Studio 2019
  • DIY Perks - Channel

    • 79 videos
    I'm Matt, and here on DIY Perks you'll find plenty of interesting DIY projects on a variety of topics, including computers, woodworking, electronics, audio, and more!
    I hope you enjoy my content, and
    • CHANNEL
    1,474,811
  • Ultrazoom Nikon P1000 SHB 01 - Duration: 44 seconds.

    • 3 months ago
    • 234 views
    Nikon P1000 mounted on a Neewer Carbon Fibre tripod via a macro rail to better align the centre of mass of the camera at full zoom over the axis of the tripod.
    Edited in Corel Video Studio using Pr...
  • SuperZoom Videos - Channel

    • 135 videos
    Welcome to the home of the #Nikon Coolpix #P1000 and Nikon Coolpix #P900 on youtube, we are all about having fun and getting the most out of these ultrazoom cameras but not in the creepy girls at the
    • CHANNEL
    3,108
  • 2018 Fireworks Bridge Hightlights - Duration: 6 minutes, 59 seconds.

    • 5 months ago
    • 130 views
    Highlights of the midnight fireworks display on Sydney Harbour Bridge shot from Blues Point Reserve on an Olympus TG5 mounted on a monopod.
    Edited in Corel VideoStudio 2018
  • 3DMN - Channel

    • 251 videos
    I'm a Noob! there i said it! Join me in my journey of making 3D Printed stuff. What stuff you say? Anything, EVERYTHING! I'm a noob that likes to get his hands dirty and dive head first in the deep en
    • CHANNEL
    48,535
  • Original Prusa I3 MK3 Review - Duration: 16 minutes.

    • 1 year ago
    • 92,817 views
    After a long wait, it's time to give you my view on the latest addition in the Prusa Family

    🛒 Prusa I3 MK3 Kit: http://geni.us/PrusaI3MK3Kit
    🛒 Prusa I3 MK3 Assembled: http://geni.us/PrusaI3MK3Asse...
  • Everything about NOZZLES with a different diameter - Duration: 8 minutes, 13 seconds.

    • 11 months ago
    • 459,954 views
    Learn more in the full article about nozzles with a different diameter:
    https://www.prusaprinters.org/everything-about-nozzles-wi...

    The default nozzle diameter for most of to...
    • CC
  • Prusa i3 MK3: Is it worth it? - Duration: 12 minutes.

    • 1 year ago
    • 98,702 views
    After two weeks of printing, totalling 220 hours and 350m of filament, I examine the successes and failures of my Prusa i3 MK3. This video features a good mix of prints, some of them decorative and...
  • Teaching Tech - Channel

    • 192 videos
    Teaching Tech is a YouTube channel dedicated to providing quality content that will help expand your technology related skills and knowledge.

    As a qualified Industrial Designer and Primary/Secondary
    • CHANNEL
    53,891
  • Surprise! - Duration: 2 minutes, 12 seconds.

    • 7 months ago
    • 43 views
    Mark briefly here from Seattle for Rache's 50th.
    A quick version for those who can't wait for the 'proper' one!
  • Working bees - Duration: 24 seconds.

    • 8 months ago
    • 8 views
    European Honey Bees in the early Sydney spring.
    Shot on Sony A7R3 with 90mm macro lens. Edited in Corel Video Studio.
  • WeMacro focus stacking rail - Channel

    • 6 videos
    • CHANNEL
    113
  • RealWorld - Channel

    • 122 videos
    The RealWorld channel will be filled with everyday, real world stuff!:) I will post a WIDE range of videos from repairs on various items to encouraging words to interesting events!:)
    • CHANNEL
    61,174
  • Beginners Guide to High Speed Sync Flash Photography - Duration: 16 minutes.

    • 1 year ago
    • 63,398 views
    Follow me on instagram - https://www.instagram.com/realworldpicts/

    I have received a good number of questions regarding flash photography and more specifically ... what is high speed sync flash, h...
  • How To Use Focus Peaking on Sony A7/A7R/A7S - Duration: 3 minutes, 14 seconds.

    • 4 years ago
    • 79,580 views
    Focus Peaking is an incredible way to manually focus your lenses
  • Capture One Pro - Channel

    • 227 videos
    Behind the scenes videos with our favourite photographers, tutorials, tips and guides to
    Whether you are a beginner or an expert, prepare yourself for a dose of tips, tricks and inspiration on our Yo
    • CHANNEL
    39,091
  • Tony & Chelsea Northrup - Channel

    • 1,024 videos
    Subscribe now for free:
    * Photography tips and tutorials
    * Camera and lens reviews
    * Photoshop and Lightroom tips
    * Weekly photography news and photo reviews
    * Weekly LIVE shows you can join
    • CHANNEL
    1,303,442
  • Affinity Photo - Channel

    • 70 videos
    Free official video tutorials for Affinity Photo (http://affinity.serif.com) - covering beginners, basics, advanced techniques and specialist photography (e.g. light painting, astrophotography, long e
    • CHANNEL
  • Affinity Revolution - Channel

    • 166 videos
    Are you ready to master Affinity Photo and Designer?

    When you subscribe to Affinity Revolution, you will get a brand new tutorial every week for one of the Affinity products. With our easy-to-follow
    • CHANNEL
    83,865
  • Nodal Ninja 3 6 degree detent - Duration: 13 seconds.

    • 1 year ago
    • 227 views
    3D printed modification to provide a 6 degree detent in place of the standard 15 degrees.
  • For Clifton 01sc - Duration: 11 minutes.

    • 1 year ago
    • 17 views
  • For Clifton 02 - Duration: 15 minutes.

    • 1 year ago
    • 11 views
    Sunday in a Sydney winter.
  • For Clifton 03 - Duration: 4 minutes, 32 seconds.

    • 1 year ago
    • 12 views
    A winter, Sunday, afternoon on Sydney harbour.
  • For Clifton 04 - Duration: 4 minutes, 49 seconds.

    • 1 year ago
    • 11 views
  • For Clifton 01 - Duration: 11 minutes.

    • 1 year ago
    • 15 views
    A winter's Sunday morning on Sydney Harbour.
  • Zena snippets at Louise's wedding 1995 - Duration: 113 seconds.

    • 2 years ago
    • 31 views
    Starts in the back garden of 36 Virginia Avenue and finishes at the wedding reception.
  • Zena snippets 1965 70 - Duration: 30 seconds.

    • 2 years ago
    • 20 views
    Starting with the Wedding of Rosemary Richardson and Michael Gordon and including some badminton.
  • It's a video 2007 06 06 - Duration: 29 seconds.

    • 2 years ago
    • 15 views
    Dinner at the Howell's
  • Linwood quartet 2009 - Duration: 3 minutes, 51 seconds.

    • 2 years ago
    • 19 views
    Performance of Humoresque by Dvorak by the Linwood String Quartet led by Zena Howell.
  • Sony Smartwatch2 - Duration: 54 seconds.

    • 2 years ago
    • 47 views
    Demo of phone call.
  • CtrlAultDelTutorials - Channel

    • 95 videos
    Want a tutorial made, just ask. I primarily deal with 3DS Max, but I know much of the Adobe Creative Suite and many other programs. It doesn't hurt to ask. I'm Jason Ault. I am a 3D Game Art Instructo
    • CHANNEL
    9,966
  • UQ Architecture - Channel

    • 69 videos
    The School of Architecture at The University of Queensland produces graduates that determine our future cities through their leadership in the profession. Our graduates have the courage and intellectu
    • CHANNEL
  • T Lewis - Channel

    • 39 videos
    Videos about 3D printings, laser cutting, programming, electronics, making, robotics from the STEAM Lab program at Voyager Middle School in Everett, WA. Part of the Mukilteo School District.
    • CHANNEL
    572
  • 2016 10 31 Flatness test OPi3MK2 - Duration: 9 minutes.

    • 2 years ago
    • 253 views
    Check of bed flatness, cold, then hot.
  • Leonardo Da Vinci's catapult 01 - Duration: 64 seconds.

    • 2 years ago
    • 4,360 views
    A 3D printed version of a design by Leonardo Da Vinci 500+ years ago.
    Designed in Moi (Moment of Inspiration), and printed in PLA on an Original Prusa i3 Mk2.
  • Prusa 3D by Josef Prusa - Channel

    • 147 videos
    We are a Czech company founded by Josef Prusa. Prusa Research is making the best desktop 3D printers in the world. All our products are open source under RepRap project. Prusa i3 (i3 stands for third
    • CHANNEL
    86,433
  • Galileo Pendulum Clock 2 3 - Duration: 97 seconds.

    • 2 years ago
    • 1,818 views
    3D printed version of the Galileo pendulum clock.
    Smaller that that posted previously. This one ticks every half second.
    Designed on Moment of Inspiration (Moi) and made on Ultimaker Original, Robo...
to add this to Watch Later

Add to

Loading playlists...