Watch Queue
Queue
Watch QueueQueue
The next video is starting
Loading...
-
-
-
-
Sign in now to see your channels and recommendations!
Watch Queue
Queue
__count__/__total__
-
Peter Binkley uploaded a video 2 months agoOsprey/Gamma Raptor: The Leather Palm - Duration: 13 minutes.
For the palm, use 6-8 ounce leather, depending on the build scale. That's 2.4-3.2mm thickness. Full assembly instructions are at:
https://docs.google.com/document/d/1xbfhPYKO-4hcpnAmYpvGP...... -
Peter Binkley subscribed to a channel 9 months ago
SeregedelReal - Channel
Here I represent video which shows my style of fast shooting from a bow. This style I named dagger-technique (in Russian: "kinzhalnaya technika" or "kinzhalka"). Kinzhalka it is simple and effective,- CHANNEL
-
Peter Binkley uploaded and posted 10 months ago
Here’s a quick and dirty Osprey Hand assembly video. I assembled this hand in just under 80 minutes, but this video plays at 4X speed, so it’s just over 18 minutes long. For full instructions, go to: https://docs.google.com/document/d/1xbfhPYKO-4hcpnAmYpvGP...
Osprey Hand Assembly Guide - Duration: 18 minutes.
This video will teach you how to assemble an Osprey Hand, which can be downloaded here: http://www.thingiverse.com/thing:910465
For instructions on making the stencil for the leather bracer, follo... -
Peter Binkley subscribed to a channel 10 months ago
Eva - Channel
- CHANNEL
-
Peter Binkley uploaded a video 1 year ago
Virtual Fitting of e-Nable Devices in Blender - Duration: 4 minutes, 19 seconds.
This final video in the e-Nable device sizing series shows how to properly size an upper-limb 3d-printed prosthetic device, using good orthographic client photos.
If you’re watching this video, you... -
Peter Binkley uploaded a video 1 year ago
Importing and Scaling Photos in Blender - Duration: 6 minutes, 13 seconds.
Here is a methodology for bringing client images into the Blender scene to help with the fitting and designing of upper-limb prostheses.
Here is the whole video series, beginning with taking good o... -
Peter Binkley uploaded a video 1 year ago
Making a Leather Bracer for e-Nable Devices - Duration: 5 minutes, 19 seconds.
This is the methodology for making a leather bracer compatible with all my wrist-powered Assistive designs. Leather is an excellent material for wearable prosthetic devices. This bracer is compatib... -
Peter Binkley uploaded a video 1 year ago
Ody Hand 2.0 Mechanical Function - Duration: 32 seconds.
Just a quick shot of the Ody Hand 2.0. This was printed in ABS and 1.2mm nylon monofilament cables have been installed. This new version of the Ody Hand assembles much like the Osprey Hand, the Ga... -
Peter Binkley uploaded a video 1 year ago
Vapor Smoothing of 3D Printed ABS and PLA with Acetone and Ethyl Acetate - Duration: 32 minutes.
Today we’re going to learn how to smooth 3d printed plastic with chemical vapors.
Why is Vapor Smoothing a good idea?
1. Vapor smoothed parts look smooth and shiny. And since surfaces are now no... -
Peter Binkley uploaded a video 1 year ago
Osprey: Removing Support Material from Bracer Version 2.5 and Beyond - Duration: 2 minutes, 59 seconds.
I released a new bracer model. Thanks to Andreas Bastian for inspiring the built-in support material in this version.
Full assembly instructions are at: https://docs.google.com/document/d/1xbfhPYK... -
Peter Binkley uploaded a video 1 year ago
Osprey/Gamma Raptor: Adding Foam Padding to the Palm - Duration: 9 minutes, 11 seconds.
Good padding is important. Protect your client from hard plastic surfaces.
Full assembly instructions are at: https://docs.google.com/document/d/1xbfhPYKO-4hcpnAmYpvGP...... -
Peter Binkley uploaded a video 1 year ago
Osprey/Gamma Raptor: Reaming out the Holes in the Palm - Duration: 8 minutes, 45 seconds.
Because the Osprey and Gamma Raptor mechanical hands print at a variety of sizes, the plastic holes sometimes need to be drilled out for the steel screws to fit properly. Depending on your print sc... -
Peter Binkley uploaded a video 1 year ago
The Osprey Hand: First Impressions - Duration: 7 minutes, 14 seconds.
Here are two recipients of the Osprey Hand moments after they first put it on. The first recipient shown has never used a wrist-powered assistive device, and the second recipient is my son, who has... -
Peter Binkley uploaded a video 1 year ago
Osprey/Gamma Raptor: Installing Cables in the Distal Phalanges - Duration: 7 minutes, 52 seconds.
The nylon monofilament installs permanently into the distals by melting the end into a ball, then pulling that ball firmly into the fingertip.
Here are the instructions for assembling the Osprey an... -
Peter Binkley uploaded a video 2 years ago
Experimental Curved Knuckles for Osprey Hand - Duration: 4 minutes, 37 seconds.
I tried spreading the fingers of this mechanical hand by curving the knuckle block and knuckle pin. I'm hoping to gain better opposition between the thumb and fingers. The grip pattern looks cool, ... -
Peter Binkley uploaded a video 2 years ago
Osprey/Gamma Raptor: Removing Support Material from the Palm and Bracer - Duration: 5 minutes, 58 seconds.
The Osprey and Gamma Raptor models have built-in support material, so your slicer settings should say "no support". If you print in ABS and want extra bed adhesion, you may print with a brim. PLA n... -
Peter Binkley uploaded a video 2 years ago
Osprey/Gamma Raptor: Removing Support Material From the Distal Phalanges (Fingertips) - Duration: 2 minutes, 31 seconds.
Osprey and Gamma Raptor devices have built in print support, so please print the models with your slicer's "no support" setting.
After printing the distals for your Osprey or Gamma Raptor, you wil... -
Peter Binkley uploaded a video 2 years ago
Flextensor - Duration: 15 minutes.
A little demo of the Flextensor, formerly called the Flextender. I hope this helps those who are trying out the Flextensor. Files are available on Thingiverse, where my handle is profbink. -
Peter Binkley uploaded and posted 2 years ago
Peregrine came out to Virginia in January, and we worked out a few upgrades.
Talon Hand 2.72 - Duration: 64 seconds.
Peregrine has upgraded his Talon! Now version 2.72. Seriously heavy duty mechanical hand. -
Peter Binkley uploaded a video 2 years ago
Talon Hand Footage - Duration: 7 minutes, 37 seconds.
Peregrine demonstrates the use of his Talon Hand. He decided to remove the elastics, and the device works surprisingly well with nylon monofilament trimmer line, which has nice push/pull Bowden qua... -
Peter Binkley uploaded a video 2 years ago
Flextensor Demo - Duration: 3 minutes, 23 seconds.
A permutation of the "flexor" and "extensor", which are the muscle groups that flex and extend joints such as fingers.
This is a mechanical assistive prosthetic device intended for recipients with... -
Peter Binkley uploaded a video 2 years ago
Ody Hand Mechanical Demo - Duration: 74 seconds.
Here is some old footage of Ody Hand "testing". This hand was printed at 100%.
The nice thing about this build is the total absence of elastics. As you can see, there is not much resistance in the ...
Popular channels
-
Jake Paul - Channel
-
Logan Paul Vlogs - Channel
-
Erika Costell - Channel
-
Lance Stewart - Channel
-
Ryan ToysReview - Channel
-
shane - Channel