Upload

HPI Trophy Truggy 4.6 Engine break in - www.rrcc.ch

by adminOFadministrator • 126,134 views

HPI Trophy Truggy 4.6 Engine break in.. Two tanks Nitro in stood. One tank Nitro half acceleration with Sidewinder 25% Nitro. More Videos from my Trophy Truggy 4.6 coming soon! Please check out:...

I hit my engine up with a hairdryer and get it really nice and warm, Then I have some sleeves I slide over the engine and completely cover it to keep the heat it after I start the motor and I let it idle for 4 tanks of full, I continuously keep filling it without shutting down the engine. Only on the 5th tank will I start to drive it around but never above mid throttle. On the 6th tank of fuel I replace the glow plug and begin to tune it and do full throttle runs! I only use Byrons Gen 2 race fuel I won't touch anything else! Also when its cold I use medium-hot or hot plugs!
Report spam or abuse
Looks cold, preheating the engine works wonders, plus a hotter plug is needed in cold weather.
Report spam or abuse
How much did you get it for?
Report spam or abuse
2 pulls on mine and it started on its first time
Report spam or abuse
there is no need for special break in fuel. you can use whatever nitro % you feel like.
Report spam or abuse
What is best this truck or a hpi savage x4.6
Report spam or abuse
idiots hope you snap your pull start, why would you tune it when you are breaking in the engine fucking morons. yous have not got a brain between yous bet your TT didnt last long clowns.
Report spam or abuse
that happened to my trophy truggy at the few first starts it took iven longer nice vid and a very good car;) ;) :) =0
Report spam or abuse
@NirvanaRox4Eva there are two ways. either add another clip to the shock to compress the spring more or hpi sell harder shock springs which will lift it higher. hope that helps :)
Report spam or abuse
what does the engine break in mean????
Report spam or abuse
looked like a hydrolic fuel lock at 2.13
Report spam or abuse
öffffffffffffffff çok sıkıcı hiç uğraşılmaz bu nitrolu araçlarla
Report spam or abuse
It isnt so that I would hate breaking in but it needs so much fuel and isnt actually fun
Report spam or abuse
Yes, he was relatively high. But I have changed the setup again. He was too unstable in the corners.
Report spam or abuse
Report spam or abuse
lol thought it be alittle funny i know 2 secs not much but if your racing these things it can be alot.
Report spam or abuse
Lol, two peoples to start a little car. The worst video for engine break in?
Report spam or abuse
jajaja wieder Arlesheim go umgrabe!! =)
Report spam or abuse
Bashingwithtraxxas u do realize u have to break in the engine before driving it?
Report spam or abuse
Would you recommend it, and is it strong thanks
Report spam or abuse
the pull start is the worst and i woould get the electric start so its easier
Report spam or abuse
try priming the engine and hold down on the glow stick
Report spam or abuse
sowas macht man im Frühjahr aber nicht im Winter
Report spam or abuse
суходрочка подзаебала
Report spam or abuse
Ahh cool, you reckon its best to leave it in the settings it arrives?
Report spam or abuse
kk to comedo de compra um e presisa de 5 pesoas pra liga
Report spam or abuse
It is a Merry Christmas if u got this car!
Report spam or abuse
hey im trying to make my losi stadium truck 2wd in to a trophy truggy what do you think i should upgrade ???
Report spam or abuse
loool! I do not care what you think. The car was new and it was -8.8 degrees celsius! Game on with your Lego! haha
Report spam or abuse
are u stupid why are u turning the needles on the first tank i bet your engine only lasted like a month
Report spam or abuse
Hehe, thats a second Trophy Truggy 4.6.. A colleague of mine has bought also one. The second is seen in the video too..
Report spam or abuse
Report spam or abuse
Report spam or abuse
@yubjuli do you have a nitro car? and putting your finger on the exaust is the best way of doing it. opening the throtle only increases air intake and will let a tiny amount more fuel into the engine.
Report spam or abuse
Report spam or abuse
you need to hold the igniter down when you pull the damn cord, also don't pull out the cord some much or you'll yank it out and then you're fucked and gonna have to respool the pull starter
Report spam or abuse
i got my first nitro car when i was 8 and i could start it better than you
Report spam or abuse
woul you recomend the truggy or the buggy obvesly you probaly havent had a go on the buggy but hopfuly you might have some idea thanks
Report spam or abuse
does the car have weak points? yes... what...?
Report spam or abuse
Report spam or abuse
Well, it has good compression, that's for sure!!
Report spam or abuse
You changed your suspension setup by any chance cos mine rides a lot lower than that? Cheers.
Report spam or abuse
i broke in my exceed with 3-4 pulls -.-
Report spam or abuse
Report spam or abuse
Thanks man! The car makes a very solid impression. I'm still not running at maximum power. But for this price it is certainly an impressive car. It has some aluminum components and the engine is, of course unbeatable! The best way you look at the HPI site for..
Report spam or abuse
one thign if you ever make another video dont record eighteen hourse of your car siting on a stool doing nothing. atleast stop recording or cut it out. Cause people dont want to watch your car doign nothing, also cut out the parts that take you 20 hours to start it lmfao
Report spam or abuse
you ever hear of a heat gun it help start it
Report spam or abuse
that just sounds and looks wrong
Report spam or abuse
hey man, whats the intro song? =D
Report spam or abuse
Guys take it easy on them. It was -8c and it was the engines first start ever and probably the needles were all messed up from the factory. Yes, they should of used a heat gun to heat up the engine and hey, if it was Christmas morning or the day I got the car , I would be way to excited to bother to mess around with heaters :P and also because where I live it is 20c in winter :)
Report spam or abuse
Whats idling in the background? Sounds like a savage
Report spam or abuse
LOL, first 2:30 is the reason why I went electric.
Report spam or abuse
do you knw what wheel size and hex these are? thanks
Report spam or abuse
Sono molto contento del truggy. Dopo la modifica, è molto più stabile e non ancora spezzato, anche se ho avuto incidenti gravi. Spero di aver risposto alla sua domanda. In caso contrario si prega di scrivere di nuovo. :)
Report spam or abuse
what was the problem with this to begin with - why didn't it start?
Report spam or abuse
erstmal schön warm laufen lassen, super nicht so wie paar verrückt die sofort vollgas geben nachem anmachen :)
Report spam or abuse
why did you use 25% nitro for the break in exactly?
Report spam or abuse
Report spam or abuse
Prawie szarpanke urwał. Docieranie do dupy ten silnik długo nie po żyje.
Report spam or abuse
@MrDrew96 he might have been setting the needles to factory setting cuz some arent on factory needle settings...or he was adjusting the idle speed ;)
Report spam or abuse
Report spam or abuse
i have just recieved one of these, not ran it yet though, but how do you tighten up the suspension? cos mine is like basically sittin on the floor lol? thanks
Report spam or abuse
@jesiiiibaa Sometimes first starting a nitro can be a real pain in the ass.
Report spam or abuse
I hope I understand yours ask correctly. I would recommend to you the Truggy, he is the better allrounder.
Report spam or abuse
how does your arm feel after all that pulling lol
Report spam or abuse
ay dude when you are puling the pull starter try holding down the car by pushing down on the glow starter
Report spam or abuse
It's good to breaking in the nitro car in winter
Report spam or abuse
Report spam or abuse
it's not a good idea to break his engine wenn it's cold and freezing outside. you should did it in summer. olso my trophy 4.6 dont take a undred of pull to starte i thik it's olso beaucause the cold
Report spam or abuse
this video is fucking stupid how many people it take to start a hpi truggy
Report spam or abuse
sweetest truggy ever!!!! , sounds like my losi ten t , and great vid
Report spam or abuse
The 25% just mean the ratio of nitro content in the fuel. This car can run on 20-25%. Any more and you could risk damaging the engine. For break in, I would recommend 20% as it is less hard on the engine and offers slightly more lubrication.
Report spam or abuse
2:00 - flooded engine and you pulling again
Report spam or abuse
just wanted to point out it was 2.35 when finally it started not 2.37 sorry teebagger
Report spam or abuse
Ok, I'll just try it today. It is my first nitro with Pullstarts .. :)
Report spam or abuse
It probelly did not start that well because it was so cold outside!
Report spam or abuse
You could break two pullstarts easy in that weather unless You heated the block first.
Report spam or abuse
shud b running lean as fuck in cold weather like that
Report spam or abuse
LOL at all the people saying nitro is "garbage". For example SlipperySpandex. People like him say that because they have no idea what the fuck they are doing, bitch out and go to electric.
Report spam or abuse
Only the wheel hubs. Otherwise, I've found so far nothing ...
Report spam or abuse
Report spam or abuse
thats the best part when you get a new RC car and finally get it started, just to here that bad boy run
Report spam or abuse
Report spam or abuse
Report spam or abuse
Report spam or abuse
don't you know a shit about nitro rc?? it took you 2 f***ing minutes to start it
Report spam or abuse
@yubjuli Why reply with a wrong answer? Nitro cars use the exhaust to pressurise the fuel tank, holding either a rag or holding it with your finger will cause the fuel tank to pressurise and cause the fuel into the carb.
Report spam or abuse
your suppost to let the engine break in with the wheels of the ground for 3 tanks you clowns or your engine will be shit. fucking idiots
Report spam or abuse
We wish you a merry xmas (Metal xmas) YouTube Link: v=p54CMth4Jpg ;)
Report spam or abuse
You guys are raping the car
Report spam or abuse
no it didnt start cus u never covered the exhaust to pump the fuel round. simply cover the exhaust a phew pulls then release whilst pulling the engine cored.
Report spam or abuse
Show more Loading...
Sign in to add this to Watch Later

Add to