Echo 1 E90 (P90) Disassembly
Loading...
Link to this comment:
Uploader Comments (trinityairsoft)
All Comments (38)
-
can someone help me? i got an e90 and sometimes after loading a fresh mag, it'll shott right after about 3 bbs, those 3 bbs will get caught and its like the gun spits them out instead of shooting them. is the problem the gun, is it jamming, or am i just overloading the mag or something?
-
i took out the upper reciever of mine and i put it back in and it doesnt sound like an airsoft gun and is waaayyy less powerful... it will drop in power at like 100 ft
-
can you do a video on just how to change the motor on this gun?
-
@odstmexicanrecruit1 same thing happens to mine
-
@odstmexicanrecruit1 what does the gun sound like? Do the bb's roll out of the barrel or refuse to move? What kind of gun is this?
-
Would I be likely to seriously screw the gun up if I watched this video while changing the spring? I'm trying to avoid paying an extra $40 to get a pro to do it.
-
hey my gun doesnt shoot, when y pull the trigger it doesnt sound as normal, and the bbs dont come out of the barret
can someone help me?
-
@proshot I think it takes a long shaft motor.
-
@proshot long
-
@trinityairsoft my gun shoots a few then it shoots one out at like 180fps when they should all shoot at 380ish whats the problem? its pissing me off
7:55
P-90 SYSTEMA upgraded & maxxed out CQBby TheGrandWaikikian319,109 views- 7:07
Nokia E90 upper blockby korawat00713,681 views
- 0:42
TM P90 High Speed 55 rpsby busterlonghorn62,709 views
- 10:00
Version 6 gearbox Takedown and Explanation (p90) P.1of 4by boomheadshot324,939 views
- 1:33
ECHO 1 E90 / Tokyo Marui P90 Troubleshootingby shortyusa5,571 views
- 1:27
P90 Disassemblyby Mechbox6mm7,008 views
- 1:57
Echo 1 E90 Airsoft Reviewby GSRforWin8,681 views
- 6:58
Ruger P90 complete disassemblyby riffheavy10,096 views
- 10:00
Version 6 gearbox Takedown and Explanation (p90) P. 3 of 4by boomheadshot323,492 views
- 8:45
E1, CA, TM, KS P90 Full Disassemblyby STORMairsoftReviews1,451 views
- 1:24
Larry Vickers and the FN P90by VickersTacticalInc92,255 views
- 7:20
Classic Army P90 reviewby randomaznkenny23,046 views
- 7:05
ECHO 1 E90 (P90): Reviewby Wulfmancala21,374 views
- 9:33
KS P90 Dissasembly, Maintenance, and Pain Testby MDairsoft4,466 views
- 3:48
echo 1 p90 reviewby DaMeXiCaNpAnDa3,751 views
- 1:35
Echo 1 P90 Shooting Test.by AirsoftPOW13,795 views
- 0:23
Echo 1 P90 in the snowby CptFreeball1,439 views
- 3:22
ECHO 1 E90 Field Strippingby shortyusa3,107 views
- 2:17
Overview of the Echo 1 E90 Box Magby AirsoftCarolina7,755 views
- 2:10
WELL P90 PGB with 15.45v batteryby bleucheeze0655,692 views
where is the Cut-off lever at cause my semi don't work and i think that is the reason. cause my Cut-off lever failed!
Gunnoe69 2 years ago
Usuallt when the semi doesn't work its because the contacts are burnt out on the semi. Check your trigger switch the contact above the trigger, clean them good or even replace the switch, should resolve your problem
trinityairsoft 2 years ago
Can u help me i took my barrel out of the hop up system and i put it back in and it shoot way less powerful now please help.
DEATHDEALER507 3 years ago
you should double check that the hop-up nub wasn't lost during re-installation of the barrel.
trinityairsoft 2 years ago